Page 1 of 49
Texas Plumbing Journeyman EXAM NEWEST ALL
300 QUESTIONS AND VERIFIED SOLUTIONS 2026-
2027 LATEST UPDATE THIS YEAR
QUESTION: A confined space is a room or space having a volume equal to at least ______ of the
aggregate input rating of all the fuel-burning appliances in that space. - ANSWER-100 cubic feet
per BTU/hr.
QUESTION: A joint obtained by the joining of metal parts with metallic mixtures or alloys that
melt at a temperature up to 840 degrees is a - ANSWER-Soldered joint
QUESTION: The organization, office, or individual responsible for enforcing the requirements of
a
code or standard is the - ANSWER-Plumbing Inspector
,Page 2 of 49
QUESTION: That portion of a drainage system that does not drain by gravity into the building
sewer is known as a - ANSWER-Sewer ejector
QUESTION: A pipe inside a building that conveys storm water from the roof to a storm drain is
called a (an) - ANSWER-Building storm drain
QUESTION: A device designed to provide protection against hydraulic shock in the building
water supply system is called a - ANSWER-Water hammer arrestor
QUESTION: A device installed in a drainage system to prevent reverse flow is a - ANSWER-
Backflow preventer
QUESTION: Any pressure less than that by atmosphere is a - ANSWER-Negative pressure
QUESTION: When a backflow device does not bear a critical level marking, the part of the
device that shall constitute the critical level is the - ANSWER-Top
,Page 3 of 49
QUESTION: Disposal of sewage, or other liquid wastes, shall be by means of - ANSWER-The
drainage system of the building or premises
QUESTION: A connection to the public sewer, or private sewage disposal system, is required for
- ANSWER-Buildings with plumbing fixtures
QUESTION: Burred ends of all pipe and tubing shall be - ANSWER-Reamed to the full bore of the
pipe or tube
QUESTION: All trenches deeper than the footing of any building or structure and paralleling the
same shall be at least - ANSWER-45-degree therefrom
QUESTION: Cast-iron soil pipe, installed vertically, shall be supported at its base and - ANSWER-
Every other story
Q; Fixture connections that require the removal of an access panel for servicing are considered -
ANSWER-Accessible
, Page 4 of 49
QUESTION: That part of the lowest piping of a drainage system that receives the discharge from
soil, waste, and other drainage pipes inside the walls fo the building and conveys it to a point 2
feet outside the building wall is a - ANSWER-Building sewer
QUESTION: A vertical vent that is a continuation of the drain to which it connects is a -
ANSWER-Circuit vent
QUESTION: A horizontal drain that is sized to provide free movement of air above the flow line
of the drain is called a - ANSWER-Continuous waste system
QUESTION: The length along the centerline of the pipe and fittings is the - ANSWER-Diameter
length
QUESTION: A device integrated within an air accumulator vessel that is designed to discharge a
predetermined quantity of water to fixtures for flushing purposes is a - ANSWER-Expansion tank
QUESTION: The combination of fittings that may be used to make an offset and is considered a
vertical pipe are - ANSWER-1-45 degree and 1-45degree
Texas Plumbing Journeyman EXAM NEWEST ALL
300 QUESTIONS AND VERIFIED SOLUTIONS 2026-
2027 LATEST UPDATE THIS YEAR
QUESTION: A confined space is a room or space having a volume equal to at least ______ of the
aggregate input rating of all the fuel-burning appliances in that space. - ANSWER-100 cubic feet
per BTU/hr.
QUESTION: A joint obtained by the joining of metal parts with metallic mixtures or alloys that
melt at a temperature up to 840 degrees is a - ANSWER-Soldered joint
QUESTION: The organization, office, or individual responsible for enforcing the requirements of
a
code or standard is the - ANSWER-Plumbing Inspector
,Page 2 of 49
QUESTION: That portion of a drainage system that does not drain by gravity into the building
sewer is known as a - ANSWER-Sewer ejector
QUESTION: A pipe inside a building that conveys storm water from the roof to a storm drain is
called a (an) - ANSWER-Building storm drain
QUESTION: A device designed to provide protection against hydraulic shock in the building
water supply system is called a - ANSWER-Water hammer arrestor
QUESTION: A device installed in a drainage system to prevent reverse flow is a - ANSWER-
Backflow preventer
QUESTION: Any pressure less than that by atmosphere is a - ANSWER-Negative pressure
QUESTION: When a backflow device does not bear a critical level marking, the part of the
device that shall constitute the critical level is the - ANSWER-Top
,Page 3 of 49
QUESTION: Disposal of sewage, or other liquid wastes, shall be by means of - ANSWER-The
drainage system of the building or premises
QUESTION: A connection to the public sewer, or private sewage disposal system, is required for
- ANSWER-Buildings with plumbing fixtures
QUESTION: Burred ends of all pipe and tubing shall be - ANSWER-Reamed to the full bore of the
pipe or tube
QUESTION: All trenches deeper than the footing of any building or structure and paralleling the
same shall be at least - ANSWER-45-degree therefrom
QUESTION: Cast-iron soil pipe, installed vertically, shall be supported at its base and - ANSWER-
Every other story
Q; Fixture connections that require the removal of an access panel for servicing are considered -
ANSWER-Accessible
, Page 4 of 49
QUESTION: That part of the lowest piping of a drainage system that receives the discharge from
soil, waste, and other drainage pipes inside the walls fo the building and conveys it to a point 2
feet outside the building wall is a - ANSWER-Building sewer
QUESTION: A vertical vent that is a continuation of the drain to which it connects is a -
ANSWER-Circuit vent
QUESTION: A horizontal drain that is sized to provide free movement of air above the flow line
of the drain is called a - ANSWER-Continuous waste system
QUESTION: The length along the centerline of the pipe and fittings is the - ANSWER-Diameter
length
QUESTION: A device integrated within an air accumulator vessel that is designed to discharge a
predetermined quantity of water to fixtures for flushing purposes is a - ANSWER-Expansion tank
QUESTION: The combination of fittings that may be used to make an offset and is considered a
vertical pipe are - ANSWER-1-45 degree and 1-45degree