UPDATE!!!!!2025/2026|GUARANTEED
When do you have a right to refuse to work? - ANSWER When a reasonable person
would agree that it's clearly dangerous
What's the goal of this course? - ANSWER To make you a safer worker
How do you unlock the final exam? - ANSWER Pass all topic exams and spend at least
10.25 hours in the course
What happens if you fail your third attempt at the final exam? - ANSWER You have to
retake the whole course.
What happens if you fail your third attempt at a topic exam? - ANSWER You have to
retake the whole course.
You start taking a topic exam, but halfway through you close the course. Does that count as
one of your three attempts on the exam? - ANSWER Yes, it counts.
OSHA requires you to retake the course if you take too long to finish it. Once you've started
the course, how long do you have to complete it? - ANSWER 6 months
The number of questions on each topic exam varies slightly. What determines the number of
questions? - ANSWER The length of the module
1
,Does the time you spend in a topic exam count toward the 10.25 hours you need for course
completion? - ANSWER Yes
How does the course make sure you're pacing yourself well for the 10.25-hour requirement?
- ANSWER Each module has its own time requirement.
What's the longest you can spend in the course in a single day? - ANSWER 7.5 hours
You walk away from the course but leave it open. What will eventually happen? -
ANSWER After 15 minutes, it will automatically close.
You've completed all the modules and passed the final exam. What do you need to do next?
- ANSWER Complete feedback form
You've just submitted your brief feedback form. How soon can you get your certificate of
completion? - ANSWER Right away, downloading a certificate from your ClickSafety
account
You've just submitted your brief feedback form and downloaded your certificate of
completion. How do you get your official OSHA card for this course? - ANSWER A
ClickSafety trainer will mail it to you.
How long does it take to get your OSHA card in the mail? - ANSWER Usually less than 2
weeks
You have to work outside on a ladder. The ground is uneven and the ladder isn't stable. How
should your supervisor control this hazard? - ANSWER Add dirt to level the area and
assign you a spotter.
Which of the following accurately describes a hazard? - ANSWER It's anything that
could cause an injury or illness.
2
,You report a serious safety hazard to your supervisor and their manager, and they tell you to
ignore it. What should you do? - ANSWER Contact OSHA and file a complaint.
Who is responsible for providing you with the appropriate safety equipment on the job site?
- ANSWER Your company is responsible for providing safety equipment.
You believe that you have been retaliated against after filing an OSHA complaint. How long
do you have to file a whistleblower complaint? - ANSWER 30 days
An OSHA investigation is about to happen on your site. What's the first step of the
investigation? - ANSWER The investigators present their credentials to the supervisor
on site.
Of the six types of hazards, which of the following is a safety hazard? -
ANSWER Slippery floors
Your manager sends you to a safety training to learn how to use a new tool, but it isn't in a
language you speak. What should you do? - ANSWER Let your manager know you
need a training in a language you understand.
Which of the following is an engineering control? - ANSWER Adding a guard on a new
grinder you'll be using
OSHA issues a willful violation citation to your employer. What does this mean? -
ANSWER Your employer knew they were putting workers at risk and did it anyway.
You mention to the company safety officer that you noticed an unsafe condition on your site.
If your supervisor found out you talked to the safety officer, which of the following actions
would be retaliation? - ANSWER Transferring you to a different job site
3
, A coworker has been diagnosed with tendinitis. This could be a result of which hazard? -
ANSWER Ergonomic
You are on a ladder painting and you fall because of a broken ladder step. What hazard did
you experience? - ANSWER Safety
After roofing all afternoon, you discover you have a bad sunburn. What kind of hazard
caused this? - ANSWER Physical
Which of the following could be considered a chemical hazard? - ANSWER Asbestos
At what height do most lethal falls occur? - ANSWER Below 15 ft
You need to set up a warning line as your team does roof work. Which of the following
statements is true? - ANSWER Lines must be marked with high-visibility material every
6 feet.
What kind of control is a guardrail? - ANSWER Engineering control
You have just covered a 3-foot-wide hole with a piece of plywood. What else should you do?
- ANSWER Secure the cover so it doesn't slide when in use.
You've just covered an open hole in a section of flooring. What type of hazard control is this?
- ANSWER Engineering
Your crew has been working on a high-rise building and installed a safety net 8 months ago.
There haven't been any issues with it. What do you need to do? - ANSWER Do a drop
test.
How much force should a mid rail to be able to handle? - ANSWER 150
4
When do you have a right to refuse to work? - ANSWER When a reasonable person
would agree that it's clearly dangerous
What's the goal of this course? - ANSWER To make you a safer worker
How do you unlock the final exam? - ANSWER Pass all topic exams and spend at least
10.25 hours in the course
What happens if you fail your third attempt at the final exam? - ANSWER You have to
retake the whole course.
What happens if you fail your third attempt at a topic exam? - ANSWER You have to
retake the whole course.
You start taking a topic exam, but halfway through you close the course. Does that count as
one of your three attempts on the exam? - ANSWER Yes, it counts.
OSHA requires you to retake the course if you take too long to finish it. Once you've started
the course, how long do you have to complete it? - ANSWER 6 months
The number of questions on each topic exam varies slightly. What determines the number of
questions? - ANSWER The length of the module
1
,Does the time you spend in a topic exam count toward the 10.25 hours you need for course
completion? - ANSWER Yes
How does the course make sure you're pacing yourself well for the 10.25-hour requirement?
- ANSWER Each module has its own time requirement.
What's the longest you can spend in the course in a single day? - ANSWER 7.5 hours
You walk away from the course but leave it open. What will eventually happen? -
ANSWER After 15 minutes, it will automatically close.
You've completed all the modules and passed the final exam. What do you need to do next?
- ANSWER Complete feedback form
You've just submitted your brief feedback form. How soon can you get your certificate of
completion? - ANSWER Right away, downloading a certificate from your ClickSafety
account
You've just submitted your brief feedback form and downloaded your certificate of
completion. How do you get your official OSHA card for this course? - ANSWER A
ClickSafety trainer will mail it to you.
How long does it take to get your OSHA card in the mail? - ANSWER Usually less than 2
weeks
You have to work outside on a ladder. The ground is uneven and the ladder isn't stable. How
should your supervisor control this hazard? - ANSWER Add dirt to level the area and
assign you a spotter.
Which of the following accurately describes a hazard? - ANSWER It's anything that
could cause an injury or illness.
2
,You report a serious safety hazard to your supervisor and their manager, and they tell you to
ignore it. What should you do? - ANSWER Contact OSHA and file a complaint.
Who is responsible for providing you with the appropriate safety equipment on the job site?
- ANSWER Your company is responsible for providing safety equipment.
You believe that you have been retaliated against after filing an OSHA complaint. How long
do you have to file a whistleblower complaint? - ANSWER 30 days
An OSHA investigation is about to happen on your site. What's the first step of the
investigation? - ANSWER The investigators present their credentials to the supervisor
on site.
Of the six types of hazards, which of the following is a safety hazard? -
ANSWER Slippery floors
Your manager sends you to a safety training to learn how to use a new tool, but it isn't in a
language you speak. What should you do? - ANSWER Let your manager know you
need a training in a language you understand.
Which of the following is an engineering control? - ANSWER Adding a guard on a new
grinder you'll be using
OSHA issues a willful violation citation to your employer. What does this mean? -
ANSWER Your employer knew they were putting workers at risk and did it anyway.
You mention to the company safety officer that you noticed an unsafe condition on your site.
If your supervisor found out you talked to the safety officer, which of the following actions
would be retaliation? - ANSWER Transferring you to a different job site
3
, A coworker has been diagnosed with tendinitis. This could be a result of which hazard? -
ANSWER Ergonomic
You are on a ladder painting and you fall because of a broken ladder step. What hazard did
you experience? - ANSWER Safety
After roofing all afternoon, you discover you have a bad sunburn. What kind of hazard
caused this? - ANSWER Physical
Which of the following could be considered a chemical hazard? - ANSWER Asbestos
At what height do most lethal falls occur? - ANSWER Below 15 ft
You need to set up a warning line as your team does roof work. Which of the following
statements is true? - ANSWER Lines must be marked with high-visibility material every
6 feet.
What kind of control is a guardrail? - ANSWER Engineering control
You have just covered a 3-foot-wide hole with a piece of plywood. What else should you do?
- ANSWER Secure the cover so it doesn't slide when in use.
You've just covered an open hole in a section of flooring. What type of hazard control is this?
- ANSWER Engineering
Your crew has been working on a high-rise building and installed a safety net 8 months ago.
There haven't been any issues with it. What do you need to do? - ANSWER Do a drop
test.
How much force should a mid rail to be able to handle? - ANSWER 150
4
