CERTIFIED FIBER OPTICS FINAL EXAM 2 VERSIONS (VERSION
A AND B) 2025/2026 BANK MOST RECENT EXAM 2025/2026
ACTUAL COMPLETE 500 REAL EXAM QUESTIONS WITH
DETAILED VERIFIED ANSWERS (CORRECT ANSWERS)
ALREADY GRADED A+ / NEWEST EXAM / JUST
RELEASED!!
__________ permit close-up inspection of polishing
finishes - ANSWER-I
Microscope
The Main parts of a fiber optic cable are the optical fiber, -
ANSWER-Buffer
strength member,
Jacket
Unless otherwise specified, the outer jacket of a laser optimized
multimode fiber containing one fiber (LOMMF) (50/125)
premises cable containing only on fiber shall be - ANSWER-
Aqua in color
________ handle the tensile stresses applied to the cable so
the fiber is not
damaged - ANSWER-Strength
members
,A_____ cable is one that runs vertically between the
floors of building -
ANSWER-
Riser
Plenum cables are fire retardant and____ - ANSWER-Low
Smoke
Breakout cables have several individual ________cables inside
an outer jacket
- ANSWER-
simplex
_______ cables have several individual tight buffered fibers
inside and outer
jacket - ANSWER-
Distribution
___________Kits route loose tube 250um buffered fibers
into 900um tight
buffer fibers tubes ready for connectorization -
ANSWER-Fan Out Kit
OFNR is and optical fiber - ANSWER-non conductive Riser
OFCR is and optical fiber - ANSWER-Conductive riser
OFNP is and optical fiber - ANSWER-non conductive plenum
, OFCP is and optical fiber - ANSWER-
Conductive plenum
The approximate length of the fiber cable is determined by
reviewing the
_______ at both ends on length of fiber cable - ANSWER-
Sequential marker
The installation load on a cable is the _____term load
that a cable can
withstand during installation - ANSWER-
Short Term
The operating Load is the_____ term load that a cable
can withstand -
ANSWER-
Long
Composite fiber optic cables are cables that contain optical
fiber as well as
_________ as specified by the national electric code - ANSWER-
Current
Carrying conductory
the armor in an armored fiber optic cable protectes the cable
from - ANSWER-
Rodants
A AND B) 2025/2026 BANK MOST RECENT EXAM 2025/2026
ACTUAL COMPLETE 500 REAL EXAM QUESTIONS WITH
DETAILED VERIFIED ANSWERS (CORRECT ANSWERS)
ALREADY GRADED A+ / NEWEST EXAM / JUST
RELEASED!!
__________ permit close-up inspection of polishing
finishes - ANSWER-I
Microscope
The Main parts of a fiber optic cable are the optical fiber, -
ANSWER-Buffer
strength member,
Jacket
Unless otherwise specified, the outer jacket of a laser optimized
multimode fiber containing one fiber (LOMMF) (50/125)
premises cable containing only on fiber shall be - ANSWER-
Aqua in color
________ handle the tensile stresses applied to the cable so
the fiber is not
damaged - ANSWER-Strength
members
,A_____ cable is one that runs vertically between the
floors of building -
ANSWER-
Riser
Plenum cables are fire retardant and____ - ANSWER-Low
Smoke
Breakout cables have several individual ________cables inside
an outer jacket
- ANSWER-
simplex
_______ cables have several individual tight buffered fibers
inside and outer
jacket - ANSWER-
Distribution
___________Kits route loose tube 250um buffered fibers
into 900um tight
buffer fibers tubes ready for connectorization -
ANSWER-Fan Out Kit
OFNR is and optical fiber - ANSWER-non conductive Riser
OFCR is and optical fiber - ANSWER-Conductive riser
OFNP is and optical fiber - ANSWER-non conductive plenum
, OFCP is and optical fiber - ANSWER-
Conductive plenum
The approximate length of the fiber cable is determined by
reviewing the
_______ at both ends on length of fiber cable - ANSWER-
Sequential marker
The installation load on a cable is the _____term load
that a cable can
withstand during installation - ANSWER-
Short Term
The operating Load is the_____ term load that a cable
can withstand -
ANSWER-
Long
Composite fiber optic cables are cables that contain optical
fiber as well as
_________ as specified by the national electric code - ANSWER-
Current
Carrying conductory
the armor in an armored fiber optic cable protectes the cable
from - ANSWER-
Rodants
