1
For Expert help and assignment solutions, +254707240657
Uscg SWE EXAM WITH QUESTIONS AND
CORRECT DETAILED ANSWERS/EXPERT
VERIFIED FOR GUARANTEED PASS!/LATEST
UPDATE
Disposition procedures must follow Federal Requirements as stated
by. [ Ans: ] 41 CFR 102-35.30
© 2025 Assignment Expert
Prior to personal property permanently leaving CG's control [
Ans: ] Agency-affixed markings should be removed when?
Guru01 - Stuvia
Who is responsible for initiating the report of
abandonment/destruction of personal property, Form CG-5598? [
Ans: ] Property Custodian (PC)
Recommended amount of days to Complete CG-5598 process? [
Ans: ] 30 days total
PC-6
APO-5
Hazmat-2
Security-2
CO/OIC-5
, 2
For Expert help and assignment solutions, +254707240657
Regional manager-5
Final Approval-5
What command do you use to a remove computer account with
CMD? [ Ans: ] DSRM (Directory Service Removal)
What is the form for certification of Hard Drive Disposition? [ Ans: ]
DLA Form 2500
© 2025 Assignment Expert
What are all of the parts of Horizontal Cabling? [ Ans: ] Includes
Horizontal cable, WAO/connectors, and all terminations and
patch cords or jumpers.
Guru01 - Stuvia
What does CMP stand for? [ Ans: ] Communications Plenum
What does CMR stand for? [ Ans: ] Communications Riser
What does UTP stand for? [ Ans: ] Unshielded Twisted Pair
What does STP stand for? [ Ans: ] Shielded Twisted Pair
For planning cable tray pathways, the maximum pathway fill
should be [ Ans: ] 25%
Cables installed on cable runway shall be stacked no higher than
[ Ans: ] 150mm(6in)
What 3 methods can be used as cable support span systems? [
Ans: ] Cantilever brackets from a wall,
, 3
For Expert help and assignment solutions, +254707240657
Trapeze/individual rod supports from ceiling,
Directly from the floor
How should cable tray supports be located? [ Ans: ] Where
© 2025 Assignment Expert
practicable so that connections between tray sections fall
between the support point and one quarter the distance of the
span.
Guru01 - Stuvia
A support should be placed within ______ on each side of any
connection to a bend, tee or cross [ Ans: ] 600mm (24in)
A minumum of _______ access headroom shall be provided and
maintained above a cable tray system. [ Ans: ] 300mm (12in)
Cable trays within the ceiling shall protrude into the room _____
without a bend and above the ______ level. [ Ans: ] 25-75mm(1-
3in) / 2.4m (8ft)
What is an application? [ Ans: ] A set of voice and fax functions
that callers access by dialing phone numbers
Three parts of an application [ Ans: ] Blocks, voice items, and fax
items
Each block in an application represents_____. [ Ans: ] A function
For Expert help and assignment solutions, +254707240657
Uscg SWE EXAM WITH QUESTIONS AND
CORRECT DETAILED ANSWERS/EXPERT
VERIFIED FOR GUARANTEED PASS!/LATEST
UPDATE
Disposition procedures must follow Federal Requirements as stated
by. [ Ans: ] 41 CFR 102-35.30
© 2025 Assignment Expert
Prior to personal property permanently leaving CG's control [
Ans: ] Agency-affixed markings should be removed when?
Guru01 - Stuvia
Who is responsible for initiating the report of
abandonment/destruction of personal property, Form CG-5598? [
Ans: ] Property Custodian (PC)
Recommended amount of days to Complete CG-5598 process? [
Ans: ] 30 days total
PC-6
APO-5
Hazmat-2
Security-2
CO/OIC-5
, 2
For Expert help and assignment solutions, +254707240657
Regional manager-5
Final Approval-5
What command do you use to a remove computer account with
CMD? [ Ans: ] DSRM (Directory Service Removal)
What is the form for certification of Hard Drive Disposition? [ Ans: ]
DLA Form 2500
© 2025 Assignment Expert
What are all of the parts of Horizontal Cabling? [ Ans: ] Includes
Horizontal cable, WAO/connectors, and all terminations and
patch cords or jumpers.
Guru01 - Stuvia
What does CMP stand for? [ Ans: ] Communications Plenum
What does CMR stand for? [ Ans: ] Communications Riser
What does UTP stand for? [ Ans: ] Unshielded Twisted Pair
What does STP stand for? [ Ans: ] Shielded Twisted Pair
For planning cable tray pathways, the maximum pathway fill
should be [ Ans: ] 25%
Cables installed on cable runway shall be stacked no higher than
[ Ans: ] 150mm(6in)
What 3 methods can be used as cable support span systems? [
Ans: ] Cantilever brackets from a wall,
, 3
For Expert help and assignment solutions, +254707240657
Trapeze/individual rod supports from ceiling,
Directly from the floor
How should cable tray supports be located? [ Ans: ] Where
© 2025 Assignment Expert
practicable so that connections between tray sections fall
between the support point and one quarter the distance of the
span.
Guru01 - Stuvia
A support should be placed within ______ on each side of any
connection to a bend, tee or cross [ Ans: ] 600mm (24in)
A minumum of _______ access headroom shall be provided and
maintained above a cable tray system. [ Ans: ] 300mm (12in)
Cable trays within the ceiling shall protrude into the room _____
without a bend and above the ______ level. [ Ans: ] 25-75mm(1-
3in) / 2.4m (8ft)
What is an application? [ Ans: ] A set of voice and fax functions
that callers access by dialing phone numbers
Three parts of an application [ Ans: ] Blocks, voice items, and fax
items
Each block in an application represents_____. [ Ans: ] A function
