MKC SWE Exam/ MKC SWE Exam Preparation /MKC SWE Practice Exam Newest 2025/2026
Complete Questions And Correct Detailed Answers (Verified Answers) |Brand New Version!!
TCTO - (ANSWER)Technical Change Training Order
Non-Self Righting Small Boats less than 65 feet in length for - (ANSWER)Changes that create more than a
0.002 ft change in the center of gravity in any direction (vertical, longitudal or transverse) or net weight
changes of more than 1/5 of 1% of the full load displacement
All other Assets require TCTO for - (ANSWER)Changes that create more than a 0.001 ft change in center
of gravity (vertical, long, trans) or net weight changes of more than 1/20 of 1% of the full load
displacement require TCTO.
Weight Change Threshold - (ANSWER)1/5 of 1% of full load displacement for small boats.
TCTO Requirement for Other Assets - (ANSWER)0.001 ft center of gravity change triggers TCTO.
Changes to hull structure, space allocation, watertight integrity or compartmentation require -
(ANSWER)TCTO
Change to any system that affects spare parts allowance require - (ANSWER)TCTO
Fluid or Paint System Changes require - (ANSWER)TCTO
Changes that require Electromagnetic Compatibility EMC or TEMPEST Inspection require -
(ANSWER)TCTO
Form fit or function changes require - (ANSWER)TCTO
Changes in software MODS require - (ANSWER)TCTO
,MKC SWE Exam/ MKC SWE Exam Preparation /MKC SWE Practice Exam Newest 2025/2026
Complete Questions And Correct Detailed Answers (Verified Answers) |Brand New Version!!
All cutter and boats operating machine machinery, Shelby inspected how often - (ANSWER)Every hour
and reading shall be recorded
How often do cutters equipped with video and electronic control systems that monitor space is for fire
and flooding need to be inspected - (ANSWER)Every 4 hours
How often should machine machinery be checked in port? - (ANSWER)Every four hours
How often should Electrical short ties be inspected? - (ANSWER)During the hours of 6 AM to 10 PM
All propulsion machinery shall be attended during - (ANSWER)Main engine start, warm up, securing, and
during other than normal operating conditions
Coast Guard requires certified welding, brazing, and non-destructive task procedures to -
(ANSWER)Provide standard across Coast Guard, ensure high-quality welds, provide an adequate level of
safety, develop a valid method to measure knowledge and skill, provide consistent requirements
between organic commercial service providers
All critical welds must be welded by a blank and inspected at a minimum by a blank - (ANSWER)Certified
Coast Guard welder
Level two non-destructive test qualified INSPECTOR
What is the safety and environmental health manual? - (ANSWER)COMDINST space M5100.47
Coast Guard to float gas, free engineers are not authorized to certified spaces as gas free for blank -
(ANSWER)Commercial contract work
, MKC SWE Exam/ MKC SWE Exam Preparation /MKC SWE Practice Exam Newest 2025/2026
Complete Questions And Correct Detailed Answers (Verified Answers) |Brand New Version!!
Coast Guard, afloat, gas, free engineers, a float, gas, free engineer, petty officers that have obtained and
maintained qualifications are authorized to certify spaces for work only for who - (ANSWER)Coast Guard
civilian and DOD persons
EPO must issue how many gas free engine engineering certificates per year to keep qualifications
current - (ANSWER)Four
What is alternative maintenance? - (ANSWER)Changes to equipment or systems that change the design
or design capabilities to improve inherent, reliability, or functionality
What is availability? - (ANSWER)The percent of time that a system is ready for use
What is corrective maintenance? - (ANSWER)Maintenance required to restore operation of systems and
equipment to design parameters when functional failure has occurred
What is inherent availability? - (ANSWER)The percent of time that a system is theoretically available for
use
What is functional failure? - (ANSWER)Failure of an item to perform normal of characteristic actions
within specified limits
What is maintenance manager? - (ANSWER)Any person responsible for managing alternative,
preventative, or corrective maintenance
What is operational availability? - (ANSWER)Percent of time operational system is ready for use
What is preventative maintenance? - (ANSWER)Actions taken to minimize conditions that causes
unacceptable degradation of functions, prior to the occurrence of actual failure
Complete Questions And Correct Detailed Answers (Verified Answers) |Brand New Version!!
TCTO - (ANSWER)Technical Change Training Order
Non-Self Righting Small Boats less than 65 feet in length for - (ANSWER)Changes that create more than a
0.002 ft change in the center of gravity in any direction (vertical, longitudal or transverse) or net weight
changes of more than 1/5 of 1% of the full load displacement
All other Assets require TCTO for - (ANSWER)Changes that create more than a 0.001 ft change in center
of gravity (vertical, long, trans) or net weight changes of more than 1/20 of 1% of the full load
displacement require TCTO.
Weight Change Threshold - (ANSWER)1/5 of 1% of full load displacement for small boats.
TCTO Requirement for Other Assets - (ANSWER)0.001 ft center of gravity change triggers TCTO.
Changes to hull structure, space allocation, watertight integrity or compartmentation require -
(ANSWER)TCTO
Change to any system that affects spare parts allowance require - (ANSWER)TCTO
Fluid or Paint System Changes require - (ANSWER)TCTO
Changes that require Electromagnetic Compatibility EMC or TEMPEST Inspection require -
(ANSWER)TCTO
Form fit or function changes require - (ANSWER)TCTO
Changes in software MODS require - (ANSWER)TCTO
,MKC SWE Exam/ MKC SWE Exam Preparation /MKC SWE Practice Exam Newest 2025/2026
Complete Questions And Correct Detailed Answers (Verified Answers) |Brand New Version!!
All cutter and boats operating machine machinery, Shelby inspected how often - (ANSWER)Every hour
and reading shall be recorded
How often do cutters equipped with video and electronic control systems that monitor space is for fire
and flooding need to be inspected - (ANSWER)Every 4 hours
How often should machine machinery be checked in port? - (ANSWER)Every four hours
How often should Electrical short ties be inspected? - (ANSWER)During the hours of 6 AM to 10 PM
All propulsion machinery shall be attended during - (ANSWER)Main engine start, warm up, securing, and
during other than normal operating conditions
Coast Guard requires certified welding, brazing, and non-destructive task procedures to -
(ANSWER)Provide standard across Coast Guard, ensure high-quality welds, provide an adequate level of
safety, develop a valid method to measure knowledge and skill, provide consistent requirements
between organic commercial service providers
All critical welds must be welded by a blank and inspected at a minimum by a blank - (ANSWER)Certified
Coast Guard welder
Level two non-destructive test qualified INSPECTOR
What is the safety and environmental health manual? - (ANSWER)COMDINST space M5100.47
Coast Guard to float gas, free engineers are not authorized to certified spaces as gas free for blank -
(ANSWER)Commercial contract work
, MKC SWE Exam/ MKC SWE Exam Preparation /MKC SWE Practice Exam Newest 2025/2026
Complete Questions And Correct Detailed Answers (Verified Answers) |Brand New Version!!
Coast Guard, afloat, gas, free engineers, a float, gas, free engineer, petty officers that have obtained and
maintained qualifications are authorized to certify spaces for work only for who - (ANSWER)Coast Guard
civilian and DOD persons
EPO must issue how many gas free engine engineering certificates per year to keep qualifications
current - (ANSWER)Four
What is alternative maintenance? - (ANSWER)Changes to equipment or systems that change the design
or design capabilities to improve inherent, reliability, or functionality
What is availability? - (ANSWER)The percent of time that a system is ready for use
What is corrective maintenance? - (ANSWER)Maintenance required to restore operation of systems and
equipment to design parameters when functional failure has occurred
What is inherent availability? - (ANSWER)The percent of time that a system is theoretically available for
use
What is functional failure? - (ANSWER)Failure of an item to perform normal of characteristic actions
within specified limits
What is maintenance manager? - (ANSWER)Any person responsible for managing alternative,
preventative, or corrective maintenance
What is operational availability? - (ANSWER)Percent of time operational system is ready for use
What is preventative maintenance? - (ANSWER)Actions taken to minimize conditions that causes
unacceptable degradation of functions, prior to the occurrence of actual failure
