Page |1
MEDICAL GAS 6010 INSTALLERS FINAL EXAM AND
PRACTICE EXAM 2025/2026 NEWEST ACTUAL EXAM WITH
COMPLETE QUESTIONS AND VERIFIED ANSWERS
|ALREADY GRADED A+|
With the approval of the authority having jurisdiction, and what
areas shall the shut off valves be permitted to be secured to
prevent inappropriate access?
A) psychiatric or pediatric
B) maternity
C) critical care
D) anesthetizing -ANSWERS-A) psychiatric or pediatric
Bulk cryogenic liquid systems require 3 foot clearance around
three sides of the following:
A) storage container
B) vaporizer
C) manifolds for maintenance
D) all of the above -ANSWERS-D) all of the above
, Page |2
The minimum clearance around the EOCS for a temporary source
is___.
A) 3 feet
B) 2 feet
C) 5 feet
D) 6 feet -ANSWERS-A) 3 feet
The___valve Shelby the line separating the applicability between
NFPA 55 and this code.
A) source
B) main
C) in-line
D) none of the above -ANSWERS-A) source
Cryogenic fluid central supply systems should be installed by
personnel qualified in accordance with CGA M-1, standard for
medical gas supply systems at healthcare facilities, or ASSE ___,
professional qualification standard for bulk medical gas systems
install installer.
A) 6015
, Page |3
B) 6010
C) 6030
D) 6040 -ANSWERS-A) 6015
Cryogenic fluid central supply systems shall be installed in
compliance with the___current good manufacturer practices per
21 CFR 210 and 21 CFR 211.
A) FDA
B) CGA
C) USP
D) none of the above -ANSWERS-A) FDA
The following components of the cryogenic fluid central supply
system shall be accessible in visible to the delivery personnel
during filling operations:
1. Fill connection.
2. Top and bottom fill valves.
3. Hose purge valve.
4. Vent valve.
, Page |4
5. Full turn cock valve.
6. _____
7. Tank pressure indicator.
A) liquid level indicator
B) flexible hose
C) dual valves
D) venting port -ANSWERS-A) liquid level indicator
Cryogenic fluids, central supply systems instrumentation tubing
shall be constructed of annealed copper tubing or seamless ____
tubing.
A) stainless steel
B) poly
C) hard copper
D) ASTM B819 -ANSWERS-A) stainless steel
MEDICAL GAS 6010 INSTALLERS FINAL EXAM AND
PRACTICE EXAM 2025/2026 NEWEST ACTUAL EXAM WITH
COMPLETE QUESTIONS AND VERIFIED ANSWERS
|ALREADY GRADED A+|
With the approval of the authority having jurisdiction, and what
areas shall the shut off valves be permitted to be secured to
prevent inappropriate access?
A) psychiatric or pediatric
B) maternity
C) critical care
D) anesthetizing -ANSWERS-A) psychiatric or pediatric
Bulk cryogenic liquid systems require 3 foot clearance around
three sides of the following:
A) storage container
B) vaporizer
C) manifolds for maintenance
D) all of the above -ANSWERS-D) all of the above
, Page |2
The minimum clearance around the EOCS for a temporary source
is___.
A) 3 feet
B) 2 feet
C) 5 feet
D) 6 feet -ANSWERS-A) 3 feet
The___valve Shelby the line separating the applicability between
NFPA 55 and this code.
A) source
B) main
C) in-line
D) none of the above -ANSWERS-A) source
Cryogenic fluid central supply systems should be installed by
personnel qualified in accordance with CGA M-1, standard for
medical gas supply systems at healthcare facilities, or ASSE ___,
professional qualification standard for bulk medical gas systems
install installer.
A) 6015
, Page |3
B) 6010
C) 6030
D) 6040 -ANSWERS-A) 6015
Cryogenic fluid central supply systems shall be installed in
compliance with the___current good manufacturer practices per
21 CFR 210 and 21 CFR 211.
A) FDA
B) CGA
C) USP
D) none of the above -ANSWERS-A) FDA
The following components of the cryogenic fluid central supply
system shall be accessible in visible to the delivery personnel
during filling operations:
1. Fill connection.
2. Top and bottom fill valves.
3. Hose purge valve.
4. Vent valve.
, Page |4
5. Full turn cock valve.
6. _____
7. Tank pressure indicator.
A) liquid level indicator
B) flexible hose
C) dual valves
D) venting port -ANSWERS-A) liquid level indicator
Cryogenic fluids, central supply systems instrumentation tubing
shall be constructed of annealed copper tubing or seamless ____
tubing.
A) stainless steel
B) poly
C) hard copper
D) ASTM B819 -ANSWERS-A) stainless steel
