G-60, G60, 12:14
10/21/25, F-60 FIRE
AM GUARD, F-60 Study Material
G-60, G60, F-60 FIRE GUARD, F-60 Study Material COMPLETE
QUESTIONS AND CORRECT ANSWERS | GRADED A+ |
LATEST EXAM | VERIFIED ANSWERS \2025-2026
G-60 Use of oxygen and flammable gasses, or LPG or CNG for any hot
work
COF exception Torch operations for jewelry
Storing using or
handling oxygen
FDNY permit
and flammable gas
in excess of 400scf (LPG, CNG or scetylene)
oxidizing gass in excess of 504scf
Portable LPG must not be 16.4 oz
stored when the capacity of
the container is greater
than?
Portable CNG containers 8.7 SCF
must not be stored then the
capacity is greater than?
Single standard portable 100LBs in weight
LPG containers must not
exceed?
Single CNG containers must 381 SCF
not exceed?
LPG 47 lbs
400 SCF is approximately
Site specific
Types of FDNY permits permits City
/ 1/4
2
,10/22/25, 6:51 PM G-60, G60, F-60 FIRE GUARD, F-60 Study Material
wide
permits
Transportation permits
Site specific permit can be? Can be permenant or temperary
12 months only.
Permanent permits are valid
for how long? Permits and renewals require inspection and will expire adter
twelve months.
Temporary permits may be One day to 12 months depending on the construction or
valid from? operations needed.
30 days
City wise permit duration?
Hazards out end of day
5 gals gasoline
Quantity of hazardous
250 gals of flammable
material being
300 gals combustible liquid
stored(maximum)?
Transportation permit FDNY approved inspected displayed on vehicle
Hot work authorization. Required for any project with hot work operation but not issued
by the FDNY
Must be available for inspection by any representative of
Responsible person
fire department during and 48 hours after the work is
complete.
Fire guard Cof holder who is trained in and responsible for maintaijjng a fire
watch.
Survailance of an area
Detect signs of
Fire watch
early fire Raise
alarms
Notify department
Pre hot work check must be Once per day
conducted by the
responsible person before
hot work is authorized at
least?
/ 2/42
,10/22/25, 6:51 PM G-60, G60, F-60 FIRE GUARD, F-60 Study Material
Equipment working in order
Hot work is clear of combistibles and
Pre hot work check daily and
flammable solids Combustible and non
must very the following
combustible are protected
Fire watch personel are assigned
Fire extinguisher available
Fire watch A fire watch must be maintained during any hot work operation.
The person conducting a fire Not have other duties
watch shall
Fire watch Minimum 2-A:20-B:C rating shall be accessible within 30ft from hot
work
At least one portable fire
extinguisher with a
Fire watch 3-A 40-B:C
Exception roofing
operating fire extinguisher
Construction sites
Fire watch for torch Buildings and
operations conducted at structures
following locations by a F-
Rooftops
60 fire guard:
Fire watch must continue for 30 minutes after the conclusing of the work.
Time and record keeping First shall be conducted 30minute after completion
requirements
Second inspection 1 hour after completion
CNG or LPG torch operations
inspections
The inspection report must be 48 hours after work is complete for fire department
available representative to look over.
Oxygen cylinder is made of Steel and contains 100% oxygen
Oxy propane degrees 1,500 degrees
/ 3/42
, 10/22/25, 6:51 PM G-60, G60, F-60 FIRE GUARD, F-60 Study Material
Acetylene degrees 3000 degrees
Oxy-acetylene degrees 6000 degrees
Brazing and soldering Typically 840 degrees
temperatures
Oxy-fuel torch 2200 PSI (pounds per square inch)
Oxygen storage pressures up
to
Oxy-fuel torch Above 15 psi especially for acetylene
Dangerous fuel gas pressures
For burning
Gas torches also have
weeds
applications and additions
Melting ice
like
Applying tar/asphalt
Flame on torch goes out unexpectedly
Backfire
A loud snap or pop may occur when the flame goes out.
Cutting or welding flame burns inside the torch or the
Flashback
hoses. It is usually accompanied by a whistling or
hissing noise.
Frayed clothing Susceptible to ignition and burning, should not be worn.
Compression gas container High temperatures 125 degrees
Dangerous temperatures
Regulator Most important part of compressed gas systems.
A person holding a certificate of Fitness for such purposes, who is
Fire guard trained in and
responsible for maintaining a fire watch and performing
such fire safety duties as may be prescribed by the
commissioner
A temporary measure intended to ensure continuous
and systemic surveillance of a building or portion
Fire Watch
thereof by one or more qualified individuals for the
purposes of identifying and controlling fire hazards,
detecting early signs of fire, raising an alarm of fire,
and notifying the department
Cutting, welding, thermit welding, brazing, soldering, grinding,
Hot Work thermal spraying,
/ 4/42
10/21/25, F-60 FIRE
AM GUARD, F-60 Study Material
G-60, G60, F-60 FIRE GUARD, F-60 Study Material COMPLETE
QUESTIONS AND CORRECT ANSWERS | GRADED A+ |
LATEST EXAM | VERIFIED ANSWERS \2025-2026
G-60 Use of oxygen and flammable gasses, or LPG or CNG for any hot
work
COF exception Torch operations for jewelry
Storing using or
handling oxygen
FDNY permit
and flammable gas
in excess of 400scf (LPG, CNG or scetylene)
oxidizing gass in excess of 504scf
Portable LPG must not be 16.4 oz
stored when the capacity of
the container is greater
than?
Portable CNG containers 8.7 SCF
must not be stored then the
capacity is greater than?
Single standard portable 100LBs in weight
LPG containers must not
exceed?
Single CNG containers must 381 SCF
not exceed?
LPG 47 lbs
400 SCF is approximately
Site specific
Types of FDNY permits permits City
/ 1/4
2
,10/22/25, 6:51 PM G-60, G60, F-60 FIRE GUARD, F-60 Study Material
wide
permits
Transportation permits
Site specific permit can be? Can be permenant or temperary
12 months only.
Permanent permits are valid
for how long? Permits and renewals require inspection and will expire adter
twelve months.
Temporary permits may be One day to 12 months depending on the construction or
valid from? operations needed.
30 days
City wise permit duration?
Hazards out end of day
5 gals gasoline
Quantity of hazardous
250 gals of flammable
material being
300 gals combustible liquid
stored(maximum)?
Transportation permit FDNY approved inspected displayed on vehicle
Hot work authorization. Required for any project with hot work operation but not issued
by the FDNY
Must be available for inspection by any representative of
Responsible person
fire department during and 48 hours after the work is
complete.
Fire guard Cof holder who is trained in and responsible for maintaijjng a fire
watch.
Survailance of an area
Detect signs of
Fire watch
early fire Raise
alarms
Notify department
Pre hot work check must be Once per day
conducted by the
responsible person before
hot work is authorized at
least?
/ 2/42
,10/22/25, 6:51 PM G-60, G60, F-60 FIRE GUARD, F-60 Study Material
Equipment working in order
Hot work is clear of combistibles and
Pre hot work check daily and
flammable solids Combustible and non
must very the following
combustible are protected
Fire watch personel are assigned
Fire extinguisher available
Fire watch A fire watch must be maintained during any hot work operation.
The person conducting a fire Not have other duties
watch shall
Fire watch Minimum 2-A:20-B:C rating shall be accessible within 30ft from hot
work
At least one portable fire
extinguisher with a
Fire watch 3-A 40-B:C
Exception roofing
operating fire extinguisher
Construction sites
Fire watch for torch Buildings and
operations conducted at structures
following locations by a F-
Rooftops
60 fire guard:
Fire watch must continue for 30 minutes after the conclusing of the work.
Time and record keeping First shall be conducted 30minute after completion
requirements
Second inspection 1 hour after completion
CNG or LPG torch operations
inspections
The inspection report must be 48 hours after work is complete for fire department
available representative to look over.
Oxygen cylinder is made of Steel and contains 100% oxygen
Oxy propane degrees 1,500 degrees
/ 3/42
, 10/22/25, 6:51 PM G-60, G60, F-60 FIRE GUARD, F-60 Study Material
Acetylene degrees 3000 degrees
Oxy-acetylene degrees 6000 degrees
Brazing and soldering Typically 840 degrees
temperatures
Oxy-fuel torch 2200 PSI (pounds per square inch)
Oxygen storage pressures up
to
Oxy-fuel torch Above 15 psi especially for acetylene
Dangerous fuel gas pressures
For burning
Gas torches also have
weeds
applications and additions
Melting ice
like
Applying tar/asphalt
Flame on torch goes out unexpectedly
Backfire
A loud snap or pop may occur when the flame goes out.
Cutting or welding flame burns inside the torch or the
Flashback
hoses. It is usually accompanied by a whistling or
hissing noise.
Frayed clothing Susceptible to ignition and burning, should not be worn.
Compression gas container High temperatures 125 degrees
Dangerous temperatures
Regulator Most important part of compressed gas systems.
A person holding a certificate of Fitness for such purposes, who is
Fire guard trained in and
responsible for maintaining a fire watch and performing
such fire safety duties as may be prescribed by the
commissioner
A temporary measure intended to ensure continuous
and systemic surveillance of a building or portion
Fire Watch
thereof by one or more qualified individuals for the
purposes of identifying and controlling fire hazards,
detecting early signs of fire, raising an alarm of fire,
and notifying the department
Cutting, welding, thermit welding, brazing, soldering, grinding,
Hot Work thermal spraying,
/ 4/42
