1|Page
IFSTA 7TH EDITION CHAPTER TEST 5 EXAM
UPDATED QUESTIONS AND 100% CORRECT
ANSWERS WITH A GUARANTEED A+|| 2025-2026
LATEST AND COMPLETE UPDATE WITH
VERIFIED SOLUTIONS|| GUARANTEED PASS!!
Which piece of PPE can provide a secondary layer of eye protection in addition to
an SCBA facepiece? (183) [4.1.1, 4.3.2, 4.3.3]
A. Fusee
B. Neck shroud
C. Protective hood
D. Helmet faceshield - ANSWER: D. Helmet faceshield
What is a function of station and work uniforms? (184) [4.1.1, 4.3.2]
A. Provide respiratory protection
B. Protect wearer from hazardous materials
C. Provide protection against advanced fi re behavior
D. Identify wearer as a member of the fi re department - ANSWER: D.
Identify wearer as a member of the fire department
While on duty, firefighters should avoid wearing: (184) [4.1.1, 4.3.2]
A. high-top shoes.
,2|Page
B. short-sleeved shirts.
C. clothing made from 100 percent cotton.
D. clothing made of non-fi re—resistant synthetic materials. - ANSWER: D.
clothing made of non-fire-resistant synthetic materials.
In order to avoid contaminating living quarters, should NOT be worn during
emergency operations. (185) [4.1.1, 4.3.2]
A. station footwear
B. steel-toed boots
C. cotton underwear
D. synthetic materials - ANSWER: A. station footwear
All PPE designed for structural fire fighting must meet the requirements of: (186)
[4.1.1, 4.3.2, 4.3.3]
A. NFPA 1002.
B. NFPA 1006.
C. NFPA 1971.
D. NFPA 1981. - ANSWER: C. NFPA 1971.
, 3|Page
Which piece of information must be included on the permanent compliance label
inside each piece of PPE? (186) [4.1.1, 4.3.2, 4.3.3]
A. Firefi ghter's name
B. Department name
C. Cleaning precautions
D. Wearing instructions - ANSWER: C. Cleaning precautions
What is structural PPE designed to do? (187) [4.1.1, 4.3.2, 4.3.3]
A. Eliminate exposure to hazardous materials
B. Protect from temperatures of up to 1,000°F (540°C)
C. Prevent burns from extreme fi re behaviors such as fi ashover
D. Cover all portions of skin while reaching, bending, or moving - ANSWER:
D.Cover all portions of skin while reaching, bending, or moving
In order to avoid contact burns and heat stress after leaving a heated environment,
firefighters should: (187) [4.1.1, 4.3.2]
A. thoroughly inspect PPE to check for damage.
B. place contaminated PPE in the cab of the apparatus.
C. follow rehabilitation protocols and allow clothing to cool.
IFSTA 7TH EDITION CHAPTER TEST 5 EXAM
UPDATED QUESTIONS AND 100% CORRECT
ANSWERS WITH A GUARANTEED A+|| 2025-2026
LATEST AND COMPLETE UPDATE WITH
VERIFIED SOLUTIONS|| GUARANTEED PASS!!
Which piece of PPE can provide a secondary layer of eye protection in addition to
an SCBA facepiece? (183) [4.1.1, 4.3.2, 4.3.3]
A. Fusee
B. Neck shroud
C. Protective hood
D. Helmet faceshield - ANSWER: D. Helmet faceshield
What is a function of station and work uniforms? (184) [4.1.1, 4.3.2]
A. Provide respiratory protection
B. Protect wearer from hazardous materials
C. Provide protection against advanced fi re behavior
D. Identify wearer as a member of the fi re department - ANSWER: D.
Identify wearer as a member of the fire department
While on duty, firefighters should avoid wearing: (184) [4.1.1, 4.3.2]
A. high-top shoes.
,2|Page
B. short-sleeved shirts.
C. clothing made from 100 percent cotton.
D. clothing made of non-fi re—resistant synthetic materials. - ANSWER: D.
clothing made of non-fire-resistant synthetic materials.
In order to avoid contaminating living quarters, should NOT be worn during
emergency operations. (185) [4.1.1, 4.3.2]
A. station footwear
B. steel-toed boots
C. cotton underwear
D. synthetic materials - ANSWER: A. station footwear
All PPE designed for structural fire fighting must meet the requirements of: (186)
[4.1.1, 4.3.2, 4.3.3]
A. NFPA 1002.
B. NFPA 1006.
C. NFPA 1971.
D. NFPA 1981. - ANSWER: C. NFPA 1971.
, 3|Page
Which piece of information must be included on the permanent compliance label
inside each piece of PPE? (186) [4.1.1, 4.3.2, 4.3.3]
A. Firefi ghter's name
B. Department name
C. Cleaning precautions
D. Wearing instructions - ANSWER: C. Cleaning precautions
What is structural PPE designed to do? (187) [4.1.1, 4.3.2, 4.3.3]
A. Eliminate exposure to hazardous materials
B. Protect from temperatures of up to 1,000°F (540°C)
C. Prevent burns from extreme fi re behaviors such as fi ashover
D. Cover all portions of skin while reaching, bending, or moving - ANSWER:
D.Cover all portions of skin while reaching, bending, or moving
In order to avoid contact burns and heat stress after leaving a heated environment,
firefighters should: (187) [4.1.1, 4.3.2]
A. thoroughly inspect PPE to check for damage.
B. place contaminated PPE in the cab of the apparatus.
C. follow rehabilitation protocols and allow clothing to cool.
