MKC SWE Exam NEWEST 2025 COMPLETE
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+||BRAND NEW VERSION!!
Changes to hull structure, space allocation, watertight integrity or compartmentation require -
CORRECT ANSWER- TCTO
Change to any system that affects spare parts allowance require - CORRECT ANSWER- TCTO
Fluid or Paint System Changes require - CORRECT ANSWER- TCTO
Changes that require Electromagnetic Compatibility EMC or TEMPEST Inspection require -
CORRECT ANSWER- TCTO
Form fit or function changes require - CORRECT ANSWER- TCTO
Changes in software MODS require - CORRECT ANSWER- TCTO
,All cutter and boats operating machine machinery, Shelby inspected how often - CORRECT
ANSWER- Every hour and reading shall be recorded
How often do cutters equipped with video and electronic control systems that monitor space is
for fire and flooding need to be inspected - CORRECT ANSWER- Every 4 hours
How often should machine machinery be checked in port? - CORRECT ANSWER- Every four hours
How often should Electrical short ties be inspected? - CORRECT ANSWER- During the hours of 6
AM to 10 PM
All propulsion machinery shall be attended during - CORRECT ANSWER- Main engine start, warm
up, securing, and during other than normal operating conditions
Coast Guard requires certified welding, brazing, and non-destructive task procedures to -
CORRECT ANSWER- Provide standard across Coast Guard, ensure high-quality welds, provide an
adequate level of safety, develop a valid method to measure knowledge and skill, provide
consistent requirements between organic commercial service providers
All critical welds must be welded by a blank and inspected at a minimum by a blank - CORRECT
ANSWER- Certified Coast Guard welder
Level two non-destructive test qualified INSPECTOR
TCTO - CORRECT ANSWER- Technical Change Training Order
Non-Self Righting Small Boats less than 65 feet in length for - CORRECT ANSWER- Changes that
create more than a 0.002 ft change in the center of gravity in any direction (vertical, longitudal
or transverse) or net weight changes of more than 1/5 of 1% of the full load displacement
,All other Assets require TCTO for - CORRECT ANSWER- Changes that create more than a 0.001 ft
change in center of gravity (vertical, long, trans) or net weight changes of more than 1/20 of 1%
of the full load displacement require TCTO.
Weight Change Threshold - CORRECT ANSWER- 1/5 of 1% of full load displacement for small
boats.
TCTO Requirement for Other Assets - CORRECT ANSWER- 0.001 ft center of gravity change
triggers TCTO.
What is the safety and environmental health manual? - CORRECT ANSWER- COMDINST space
M5100.47
Coast Guard to float gas, free engineers are not authorized to certified spaces as gas free for
blank - CORRECT ANSWER- Commercial contract work
Coast Guard, afloat, gas, free engineers, a float, gas, free engineer, petty officers that have
obtained and maintained qualifications are authorized to certify spaces for work only for who -
CORRECT ANSWER- Coast Guard civilian and DOD persons
EPO must issue how many gas free engine engineering certificates per year to keep
qualifications current - CORRECT ANSWER- Four
What is alternative maintenance? - CORRECT ANSWER- Changes to equipment or systems that
change the design or design capabilities to improve inherent, reliability, or functionality
What is availability? - CORRECT ANSWER- The percent of time that a system is ready for use
, What is corrective maintenance? - CORRECT ANSWER- Maintenance required to restore
operation of systems and equipment to design parameters when functional failure has occurred
What is inherent availability? - CORRECT ANSWER- The percent of time that a system is
theoretically available for use
What is functional failure? - CORRECT ANSWER- Failure of an item to perform normal of
characteristic actions within specified limits
What is maintenance manager? - CORRECT ANSWER- Any person responsible for managing
alternative, preventative, or corrective maintenance
What is operational availability? - CORRECT ANSWER- Percent of time operational system is
ready for use
What is preventative maintenance? - CORRECT ANSWER- Actions taken to minimize conditions
that causes unacceptable degradation of functions, prior to the occurrence of actual failure
EAL unscheduled maintenance - CORRECT ANSWER- AMMIS supply management, ACS
configuration management
Unscheduled maintenance without MPC's are documented where - CORRECT ANSWER- EAL
What does SFLC use to identify trends and potential reliability deficiencies - CORRECT ANSWER-
Supply and demand rates/failure data
What is FRACAS - CORRECT ANSWER- Failure reporting and corrective action system
QUESTIONS AND CORRECT DETAILED
ANSWERS (VERIFIED ANSWERS) |ALREADY
GRADED A+||BRAND NEW VERSION!!
Changes to hull structure, space allocation, watertight integrity or compartmentation require -
CORRECT ANSWER- TCTO
Change to any system that affects spare parts allowance require - CORRECT ANSWER- TCTO
Fluid or Paint System Changes require - CORRECT ANSWER- TCTO
Changes that require Electromagnetic Compatibility EMC or TEMPEST Inspection require -
CORRECT ANSWER- TCTO
Form fit or function changes require - CORRECT ANSWER- TCTO
Changes in software MODS require - CORRECT ANSWER- TCTO
,All cutter and boats operating machine machinery, Shelby inspected how often - CORRECT
ANSWER- Every hour and reading shall be recorded
How often do cutters equipped with video and electronic control systems that monitor space is
for fire and flooding need to be inspected - CORRECT ANSWER- Every 4 hours
How often should machine machinery be checked in port? - CORRECT ANSWER- Every four hours
How often should Electrical short ties be inspected? - CORRECT ANSWER- During the hours of 6
AM to 10 PM
All propulsion machinery shall be attended during - CORRECT ANSWER- Main engine start, warm
up, securing, and during other than normal operating conditions
Coast Guard requires certified welding, brazing, and non-destructive task procedures to -
CORRECT ANSWER- Provide standard across Coast Guard, ensure high-quality welds, provide an
adequate level of safety, develop a valid method to measure knowledge and skill, provide
consistent requirements between organic commercial service providers
All critical welds must be welded by a blank and inspected at a minimum by a blank - CORRECT
ANSWER- Certified Coast Guard welder
Level two non-destructive test qualified INSPECTOR
TCTO - CORRECT ANSWER- Technical Change Training Order
Non-Self Righting Small Boats less than 65 feet in length for - CORRECT ANSWER- Changes that
create more than a 0.002 ft change in the center of gravity in any direction (vertical, longitudal
or transverse) or net weight changes of more than 1/5 of 1% of the full load displacement
,All other Assets require TCTO for - CORRECT ANSWER- Changes that create more than a 0.001 ft
change in center of gravity (vertical, long, trans) or net weight changes of more than 1/20 of 1%
of the full load displacement require TCTO.
Weight Change Threshold - CORRECT ANSWER- 1/5 of 1% of full load displacement for small
boats.
TCTO Requirement for Other Assets - CORRECT ANSWER- 0.001 ft center of gravity change
triggers TCTO.
What is the safety and environmental health manual? - CORRECT ANSWER- COMDINST space
M5100.47
Coast Guard to float gas, free engineers are not authorized to certified spaces as gas free for
blank - CORRECT ANSWER- Commercial contract work
Coast Guard, afloat, gas, free engineers, a float, gas, free engineer, petty officers that have
obtained and maintained qualifications are authorized to certify spaces for work only for who -
CORRECT ANSWER- Coast Guard civilian and DOD persons
EPO must issue how many gas free engine engineering certificates per year to keep
qualifications current - CORRECT ANSWER- Four
What is alternative maintenance? - CORRECT ANSWER- Changes to equipment or systems that
change the design or design capabilities to improve inherent, reliability, or functionality
What is availability? - CORRECT ANSWER- The percent of time that a system is ready for use
, What is corrective maintenance? - CORRECT ANSWER- Maintenance required to restore
operation of systems and equipment to design parameters when functional failure has occurred
What is inherent availability? - CORRECT ANSWER- The percent of time that a system is
theoretically available for use
What is functional failure? - CORRECT ANSWER- Failure of an item to perform normal of
characteristic actions within specified limits
What is maintenance manager? - CORRECT ANSWER- Any person responsible for managing
alternative, preventative, or corrective maintenance
What is operational availability? - CORRECT ANSWER- Percent of time operational system is
ready for use
What is preventative maintenance? - CORRECT ANSWER- Actions taken to minimize conditions
that causes unacceptable degradation of functions, prior to the occurrence of actual failure
EAL unscheduled maintenance - CORRECT ANSWER- AMMIS supply management, ACS
configuration management
Unscheduled maintenance without MPC's are documented where - CORRECT ANSWER- EAL
What does SFLC use to identify trends and potential reliability deficiencies - CORRECT ANSWER-
Supply and demand rates/failure data
What is FRACAS - CORRECT ANSWER- Failure reporting and corrective action system
