A door frame includes what parts? - ANS-2 facet jambs, One head, & surrounding assembly
A lengthwise grain separation between or thru the growth earrings of lumber is referred to as a -
ANS-Shake (c 326)
A third stairway stringer should be used when the stair width exceeds - ANS-30 inches
A vapor retarder on blanket installation MUST - ANS-Face the nice and cozy aspect of the wall
Actual preferred length of a concrete block? - ANS-7 five/8 x 7 6/8 x 13 five/8
Any character running above ____ feet in height shall require guardrails or other fall prevention -
ANS-6
Building codes requires a window area no longer less than ______ percentage of total floor
place? - ANS-eight
Concrete with a clump of 4" may be used for _______ - ANS-Flatwork
Damp proofing on under-grade masonry foundation partitions shall amplify from the top of the
footing to - ANS-6 inches above the finished grade
Door casing need to be - ANS-Nailed to trimmer stud after which chalked to the wall
Employee added his personal gear to work, who is liable for the equipment protection Employer
or the worker - ANS-Employer
Fiber cement siding for exterior weather wall, the minimum thickness need to be - ANS-five/16
inches (R703.Three)
Flexible insulation placed in ground joists above an unheated crawl area should - ANS-Be
properly supported between joists/the usage of a twine mesh or rigid board (c 904-5)
For more than one-width masonry what's the MINIMUM thickness of grout between masonry
gadgets and reinforcements - ANS-1/4 inch
Guards on open sided strolling surfaces need to be positioned extra than________measured
vertically to the ground - ANS-6 feet
High wind area what number of fasteners per shingle - ANS-6 fasteners
, How some distance have to the screws be located on a 3/8 ceiling drywall Applica adhesive? -
ANS-sixteen
How is furring established on horizontal vinyl siding? - ANS-Strips need to be mounted vertically
and completely around doors and windows
How is the hand of a door decided? - ANS-By the area of the hinges whilst the door is
considered from the interior.
How long must concrete remedy before putting in wood flooring? - ANS-60 days
How MUST rafters be framed to every other - ANS-Gusset plate (R802.Three)
How ought to board and batten be hooked up? - ANS-1 inch overlap 10d nails
How must radiant warmness barrier be set up - ANS-Either rafters (1st choice)/ perforated
Ice dam safety needs to be _________ from the brink of eaves - ANS-24 inches (R905.1.2)
In a ceiling batt insulation in which is the vapor retarder positioned? - ANS-Against the back of
ceiling end
In a move slowly area how a long way from the ground joints do you want to area vapor retarder
- ANS-Top Soil
In a move slowly area, what form of vapor retarder must be used? - ANS-6 mil or eight mil
In a mortar mixture an example of a component in hydrated lime is __________ - ANS-Chalk
In a trench what is the minimal that a side step constant ladder outside platform? - ANS-30
inches
In a Vinyl soffit installation what kind of accessory is used - ANS-J or F Channel (c 677)
In drywall, what is J-trim used for? - ANS-to offer a finish aspect
In which direction have to drywall be mounted to steel studs? - ANS-In one direction best
growing the stoop of concrete - ANS-increases the wetness
MINIMUM distance among screws on half of inch drywall - ANS-12 inches (c 924)