Master Electrician 211 Exam Actual Exam
Preparation Newest 2025/2026 Complete
Questions And Correct Detailed Answers (Verified
Answers) |Brand New Version!!
A bonding conductor or jumper is a reliable conductor to ensure
the required electrical conductivity between metal parts required
to be electrically connected. This bonding conductor or jumper
shall be made to be which of the following?
1. continuous
2. supported
3. secure
4. durable - 100 correct answer as-1. continuous
For incandescent filament lamps, pendant conductors shall be
twisted together, where not cabled in a listed assembly, when
longer than
1. 2.0 feet
2. 2.5 feet
3. 3.0 feet
4. 3.5 feet - 100 correct answer as-3. 3.0 feet
If a parallel set of 600 kcmil conductors are installed separate
raceways, and these circuits are protected with 1200 ampere
,overcurrent fuses, what would be the minimum size of the
equipment grounding conductors used for this installation?
1. 8 AWG
2. 4 AWG
3. 1 AWG
4. 3/0 AWG - 100 correct answer as-4. 3/0 AWG
For a multifamily unit, the required 20 ampere dedicated circuit for
the dwelling's bathroom unit shall
1. be added to the general lighting calculation.
2. not be added to the general lighting calculation.
3. have 1,599 VA added to the general lighting calculation.
4. have 20 amperes added to the general lighting calculation. -
100 correct answer as-2. not be added to the general
lightning calculation .
Other than listed factory assemblies, individual fuses, circuit
breakers, or combinations thereof shall not be
1. connected in parallel
2. connected in series
3. used in motor protection applications
,4. used in 600-volt applications - 100 correct answer as-1.
connected in parallel
Excluding any exceptions, branch circuit conductors supplying
household ranges and cooking appliances rated at 8,750 Watts or
more shall have a minimum branch circuit rating of least how
many amperes?
1. 40 amperes.
2. 45 amperes.
3. 55 amperes.
4. 65 amperes. - 100 correct answer as-1. 40 amperes.
In guest rooms of hotels and motels, receptacle outlets shall be
permitted to be located conveniently for permanent furniture
layout shall be readily accessible, and have at least
1. four receptacles
2. three receptacles
3. two receptacles
4. one receptacle - 100 correct answer as-3. two
receptacles
Emergency system equipment shall be suitable for the maximum
available fault current at its terminals, and shall have adequate
capacity and rating for all loads to be operated which of the
following?
, 1. independently
2. manually
3. simultaneously
4. with battery - 100 correct answer as-3. simultaneously
In each dwelling unit, the service load calculation must include
HOW MANY volt-amperes (watts) for the one single phase
laundry branch circuit.
1. 4,500 volt-amperes
2. 3,000 volt-amperes
3. 1,500 volt-amperes
4. 500 volt-amperes - 100 correct answer as-3. 1,500 volt-
amperes
What would be the MINIMUM direct burial depth requirement for
irrigation and landscaping lighting systems that have a source
voltage of 24 volts, if no specific location on the property has been
determined?
1. 18 inches.
2. 12 inches.
3. 6 inches.
4. 2 inches. - 100 correct answer as-3. 6 inches
Preparation Newest 2025/2026 Complete
Questions And Correct Detailed Answers (Verified
Answers) |Brand New Version!!
A bonding conductor or jumper is a reliable conductor to ensure
the required electrical conductivity between metal parts required
to be electrically connected. This bonding conductor or jumper
shall be made to be which of the following?
1. continuous
2. supported
3. secure
4. durable - 100 correct answer as-1. continuous
For incandescent filament lamps, pendant conductors shall be
twisted together, where not cabled in a listed assembly, when
longer than
1. 2.0 feet
2. 2.5 feet
3. 3.0 feet
4. 3.5 feet - 100 correct answer as-3. 3.0 feet
If a parallel set of 600 kcmil conductors are installed separate
raceways, and these circuits are protected with 1200 ampere
,overcurrent fuses, what would be the minimum size of the
equipment grounding conductors used for this installation?
1. 8 AWG
2. 4 AWG
3. 1 AWG
4. 3/0 AWG - 100 correct answer as-4. 3/0 AWG
For a multifamily unit, the required 20 ampere dedicated circuit for
the dwelling's bathroom unit shall
1. be added to the general lighting calculation.
2. not be added to the general lighting calculation.
3. have 1,599 VA added to the general lighting calculation.
4. have 20 amperes added to the general lighting calculation. -
100 correct answer as-2. not be added to the general
lightning calculation .
Other than listed factory assemblies, individual fuses, circuit
breakers, or combinations thereof shall not be
1. connected in parallel
2. connected in series
3. used in motor protection applications
,4. used in 600-volt applications - 100 correct answer as-1.
connected in parallel
Excluding any exceptions, branch circuit conductors supplying
household ranges and cooking appliances rated at 8,750 Watts or
more shall have a minimum branch circuit rating of least how
many amperes?
1. 40 amperes.
2. 45 amperes.
3. 55 amperes.
4. 65 amperes. - 100 correct answer as-1. 40 amperes.
In guest rooms of hotels and motels, receptacle outlets shall be
permitted to be located conveniently for permanent furniture
layout shall be readily accessible, and have at least
1. four receptacles
2. three receptacles
3. two receptacles
4. one receptacle - 100 correct answer as-3. two
receptacles
Emergency system equipment shall be suitable for the maximum
available fault current at its terminals, and shall have adequate
capacity and rating for all loads to be operated which of the
following?
, 1. independently
2. manually
3. simultaneously
4. with battery - 100 correct answer as-3. simultaneously
In each dwelling unit, the service load calculation must include
HOW MANY volt-amperes (watts) for the one single phase
laundry branch circuit.
1. 4,500 volt-amperes
2. 3,000 volt-amperes
3. 1,500 volt-amperes
4. 500 volt-amperes - 100 correct answer as-3. 1,500 volt-
amperes
What would be the MINIMUM direct burial depth requirement for
irrigation and landscaping lighting systems that have a source
voltage of 24 volts, if no specific location on the property has been
determined?
1. 18 inches.
2. 12 inches.
3. 6 inches.
4. 2 inches. - 100 correct answer as-3. 6 inches
