OSHA 510 Exam Questions and Correct Answers
(100% COMPLETE ANSWERS) ALREADY
GRADED A+ | 100% satisfaction guaranteed
Eye and face protection equipment used to protect against hazards shall meet the requirements
specified in __________. - ✔✔
Failure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a cylinder of
oxygen can result in __ - ✔✔fire or explosion
For a count of days on OSHA forms, ALL calendar days are counted starting the day _____ the injury
takes place with a cap of _____ days. - ✔✔after; 180
For all trenches deeper than 5 feet, OSHA requires what to protect workers from cave-in? - ✔✔a.
sloping
b. shoring
c. benching
d. shielding
For an employer to provide a defense against a citation in a multi-employer situation, the employer
must show the following: - ✔✔1. employer did not cause the hazard to exist
2. employer did not directly control conditions causing the hazards
3. employer has taken reasonable steps to notify the party(s) charged with cause and control of the
problem
4. employer has taken reasonable steps to keep his/her employees away from the hazard
Form 301 and 300 must be filled out within __ days of _____. - ✔✔7; receiving information that a
recordable case has occurred.
Gasses and Vapors are measured in - ✔✔volume of contaminant per volume of air sampled (ppm)
General Duty Clause - ✔✔shall furnish to each of his employees' employment and a place of
employment which are free from recognized hazards that are causing or are likely to cause death or
serious physical harm to his employees
If the CSHO does not find that a company qualifies for a focused inspection, they will receive a _____
inspection - ✔✔comprehensive
In the correct order, what is OSHA's inspection priority? - ✔✔1. imminent danger
2. fatality or hospitalization
3. worker complaints/referrals
4. targeted inspections
5. follow-up inspection
Incident Rates allow for a comparative level of injuries and illnesses among different _____, _____,
and _____. - ✔✔industries, organizations, or operations
Indirect costs are _____ quantified. - ✔✔not easily; difficult
Indirect costs are usually paid by the _____. - ✔✔company
Inspections must be done by a _____ person. - ✔✔competent
Only _____ companies may have a focused OSHA inspection. - ✔✔construction
, Opening conference - ✔✔brief meeting during which the OSHA inspector will explain the purpose of
the inspection
OSHA defines an excavation as any __ cut, cavity, trench, or depression in the earth's surface formed
by earth removal - ✔✔man-made
OSHA Form 300 is the Log of _____. - ✔✔Work-Related Injuries and Illnesses
OSHA Form 300A is the annual _____ of Work-Related Injuries and Illnesses. - ✔✔summary
OSHA Form 301 is the _____ - ✔✔Injury and Illness Report
OSHA record keeping requirements are contained in 29 CFR _____, which is a horizontal standard
applying to _____ companies regulated by OSHA. - ✔✔1904; general industry
OSHA standards are found in the - ✔✔title 29 labor CFR
OSHA stands for - ✔✔Occupational Safety and Health Administration
OSHA was formed because _____ were increasing. - ✔✔injuries and illnesses
OSHA was signed into law by President _____ in December of _____. - ✔✔Nixon; 1970
OSHA's focus four injuries are: - ✔✔1. fall
2. caught-in
3. struck by
4. electrical
OSHA's mission is to _____ and _____. - ✔✔save lives and prevent injuries
OSHA's primary method of enforcement of safety regulations is through _____. - ✔✔worksite
inspections
Part _____ contains construction industry standards. - ✔✔1926
Part _____ contains general industry standards. - ✔✔1910
Part _____ contains record keeping standards - ✔✔1904
PEL - ✔✔Permissable Exposure Limits
Portable ladders with structural defects such as, broken or missing rungs or split rails shall be __ from
service until repaired. - ✔✔removed
PPE stands for - ✔✔Person Protective Equipment
Regardless of exemptions, ALL companies must report the following to OSHA: - ✔✔a. Fatalities
within 8 hours
b. Hospitalizations within 24 hours
c. Amputations within 24 hours
d. Loss of eye within 24 hours
Respirators used in the construction industry are covered under OSHA standard 1910._____. - ✔✔
Rigging equipment for material handling shall be inspected prior to __ and as necessary during use. -
✔✔use of each shift
(100% COMPLETE ANSWERS) ALREADY
GRADED A+ | 100% satisfaction guaranteed
Eye and face protection equipment used to protect against hazards shall meet the requirements
specified in __________. - ✔✔
Failure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a cylinder of
oxygen can result in __ - ✔✔fire or explosion
For a count of days on OSHA forms, ALL calendar days are counted starting the day _____ the injury
takes place with a cap of _____ days. - ✔✔after; 180
For all trenches deeper than 5 feet, OSHA requires what to protect workers from cave-in? - ✔✔a.
sloping
b. shoring
c. benching
d. shielding
For an employer to provide a defense against a citation in a multi-employer situation, the employer
must show the following: - ✔✔1. employer did not cause the hazard to exist
2. employer did not directly control conditions causing the hazards
3. employer has taken reasonable steps to notify the party(s) charged with cause and control of the
problem
4. employer has taken reasonable steps to keep his/her employees away from the hazard
Form 301 and 300 must be filled out within __ days of _____. - ✔✔7; receiving information that a
recordable case has occurred.
Gasses and Vapors are measured in - ✔✔volume of contaminant per volume of air sampled (ppm)
General Duty Clause - ✔✔shall furnish to each of his employees' employment and a place of
employment which are free from recognized hazards that are causing or are likely to cause death or
serious physical harm to his employees
If the CSHO does not find that a company qualifies for a focused inspection, they will receive a _____
inspection - ✔✔comprehensive
In the correct order, what is OSHA's inspection priority? - ✔✔1. imminent danger
2. fatality or hospitalization
3. worker complaints/referrals
4. targeted inspections
5. follow-up inspection
Incident Rates allow for a comparative level of injuries and illnesses among different _____, _____,
and _____. - ✔✔industries, organizations, or operations
Indirect costs are _____ quantified. - ✔✔not easily; difficult
Indirect costs are usually paid by the _____. - ✔✔company
Inspections must be done by a _____ person. - ✔✔competent
Only _____ companies may have a focused OSHA inspection. - ✔✔construction
, Opening conference - ✔✔brief meeting during which the OSHA inspector will explain the purpose of
the inspection
OSHA defines an excavation as any __ cut, cavity, trench, or depression in the earth's surface formed
by earth removal - ✔✔man-made
OSHA Form 300 is the Log of _____. - ✔✔Work-Related Injuries and Illnesses
OSHA Form 300A is the annual _____ of Work-Related Injuries and Illnesses. - ✔✔summary
OSHA Form 301 is the _____ - ✔✔Injury and Illness Report
OSHA record keeping requirements are contained in 29 CFR _____, which is a horizontal standard
applying to _____ companies regulated by OSHA. - ✔✔1904; general industry
OSHA standards are found in the - ✔✔title 29 labor CFR
OSHA stands for - ✔✔Occupational Safety and Health Administration
OSHA was formed because _____ were increasing. - ✔✔injuries and illnesses
OSHA was signed into law by President _____ in December of _____. - ✔✔Nixon; 1970
OSHA's focus four injuries are: - ✔✔1. fall
2. caught-in
3. struck by
4. electrical
OSHA's mission is to _____ and _____. - ✔✔save lives and prevent injuries
OSHA's primary method of enforcement of safety regulations is through _____. - ✔✔worksite
inspections
Part _____ contains construction industry standards. - ✔✔1926
Part _____ contains general industry standards. - ✔✔1910
Part _____ contains record keeping standards - ✔✔1904
PEL - ✔✔Permissable Exposure Limits
Portable ladders with structural defects such as, broken or missing rungs or split rails shall be __ from
service until repaired. - ✔✔removed
PPE stands for - ✔✔Person Protective Equipment
Regardless of exemptions, ALL companies must report the following to OSHA: - ✔✔a. Fatalities
within 8 hours
b. Hospitalizations within 24 hours
c. Amputations within 24 hours
d. Loss of eye within 24 hours
Respirators used in the construction industry are covered under OSHA standard 1910._____. - ✔✔
Rigging equipment for material handling shall be inspected prior to __ and as necessary during use. -
✔✔use of each shift
