1|Page
FLORIDA ADVANCED WASTEWATER REVIEW
EXAM|| ACCURATE AND FREQUENTLY TESTED
QUESTIONS AND 100% CORRECT ANSWERS WITH
RATIONALES|| LATEST AND COMPLETE UPDATE
WITH EXPERT VERIFIED SOLUTIONS|| SURE PASS!!
Prepare to feed a greater quantity of chemicals
When operating an advanced treatment facility using chemical treatment for solids
removal, you discover high flows entering the system, you should?
PR
When using Polymer in a gravity thickening process for sludge, when would more
polymer dosages be required? when the:
O
Hydraulic loading rate increases
FD
When bacteria laden with phosphorus are faced with a parent death, they:
Release phosphorus from their cell structure in large quantities
O
C
Head loss in a gravity filter is determined by
Measuring the water pressure above and below the filter media
What dosage of chlorine can be fatal in just a few breaths
1000 ppm
, 2|Page
Which statement best describes at which speed a belt filter press should be
operated
The ideal belt speed is the slowest. The operator can maintain without washing out
the belt.
What steps should the operator take if washing out occurs while operating a belt
filter press?
PR
Lower flow rate, and increase belt speed
O
A problem with plastic pipe laterals resting on the surface in a spray irrigation
system is
FD
The pipe can deteriorate due to exposure to sunlight
O
FDEP approved continuous online analyzing of reclaimed water effluent includes
analyzing for:
C
pH chlorine residual turbidity
Lime is used more frequently for phosphorus removal than aluminum sulfate
because aluminum sulfate:
Is more expensive than lime
FLORIDA ADVANCED WASTEWATER REVIEW
EXAM|| ACCURATE AND FREQUENTLY TESTED
QUESTIONS AND 100% CORRECT ANSWERS WITH
RATIONALES|| LATEST AND COMPLETE UPDATE
WITH EXPERT VERIFIED SOLUTIONS|| SURE PASS!!
Prepare to feed a greater quantity of chemicals
When operating an advanced treatment facility using chemical treatment for solids
removal, you discover high flows entering the system, you should?
PR
When using Polymer in a gravity thickening process for sludge, when would more
polymer dosages be required? when the:
O
Hydraulic loading rate increases
FD
When bacteria laden with phosphorus are faced with a parent death, they:
Release phosphorus from their cell structure in large quantities
O
C
Head loss in a gravity filter is determined by
Measuring the water pressure above and below the filter media
What dosage of chlorine can be fatal in just a few breaths
1000 ppm
, 2|Page
Which statement best describes at which speed a belt filter press should be
operated
The ideal belt speed is the slowest. The operator can maintain without washing out
the belt.
What steps should the operator take if washing out occurs while operating a belt
filter press?
PR
Lower flow rate, and increase belt speed
O
A problem with plastic pipe laterals resting on the surface in a spray irrigation
system is
FD
The pipe can deteriorate due to exposure to sunlight
O
FDEP approved continuous online analyzing of reclaimed water effluent includes
analyzing for:
C
pH chlorine residual turbidity
Lime is used more frequently for phosphorus removal than aluminum sulfate
because aluminum sulfate:
Is more expensive than lime
