Gas Fitter test | Questions & Expertly Verified Answers Latest Update 2025 | 2026 Already Graded A+

Gas Fitter test | Questions & Expertly Verified Answers Latest Update 2025 | 2026 Already Graded A+ Quiz_________________? A Class A Gas Fitter Certificate of Qualification - Answer entitles the holder to perform the installation or alteration of any gas system, except vehicle fuel systems, under an appropriate permit Quiz_________________? A Class B Gas Fitter Certificate of Qualification - Answer an appliance with an input of 120 kW or less that displays a label or mark as follows: a certification mark; an approval mark issued under section 10 of the Act; Piping and vents Quiz_________________? Discretion whether to inspect after issue of permit - Answer Except as otherwise provided under this Act a safety officer is not required to inspect regulated work or a regulated product solely because a permit was issued in respect of the regulated work or regulated product. Quiz_________________? Directives - Answer (a) generally, (b) for a specific regulated product or class of regulated products, (c) for specific regulated work or class of regulated work, (d) for a class of persons, or (e) for or in relation to a specified period of time. Quiz_________________? Safety orders - Answer To prevent, avoid or reduce risk of personal injury or damage to property, a provincial safety manager may, in writing, issue a safety order. (2) A safety order may be issued to any person in relation to any of the following: (a) regulated work or regulated products generally; (b) a specific class of regulated product or regulated work; (c) a specific regulated product or regulated work. (3) For certainty, a safety order issued under this section may apply to (a) regulated work that meets the requirements under this Act, (b) regulated work that previously met the requirements under this Act or a former Act but does not meet the current requirements under this Act, (c) regulated products that meet the requirements under this Act, or (d) regulated products that previously met the requirements under this Act or a former Act but do not meet the current requirements under this Act, including a regulated product that bears a certification mark. (4) A safety order may specify any requirement that is intended to prevent, avoid or reduce the risk of personal injury or damage to property and may include any of the following orders: (a) that an existing regulated work or regulated product must be made safe in compliance with the safety order; (b) that a regulated product must be (i) disconnected from a power source, (ii) uninstalled, or (iii) modified before continued use; (c) that a regulated product must be operated, installed, manufactured or disposed of only as specified or that a regulated product must not be moved; (d) that current or future regulated work or a regulated product must conform to the terms or conditions of the order; (e) that a person take or refrain from taking any action that a safety manager considers necessary to prevent, avoid or reduce a risk of personal injury to persons or damage to property; (f) that Quiz_________________? Variances - Answer (1) A safety officer may, if requested by any person, issue, in writing, a variance to the person varying the application of a provision of the regulations with respect to a regulated product or regulated work. (2) A variance may (a) be made subject to terms and conditions specified by the safety officer, and (b) continue for a specified period of time. (3) If the person who holds a variance complies with the terms and conditions of the variance, the person must be considered to be in compliance with the regulation that it varies. (4) If a person applies for a variance and a safety officer refuses to issue it, or issues it with terms or conditions attached to it that are not requested or agreed to by the applicant, the safety officer who deals with the application must inform the applicant and, if the applicant requests written notice, give the applicant written notice of that decision. (5) A written notice under subsection (4) must state the reasons for the decision and that the applicant has the right to make a written request for a review by a safety manager. (6) A decision of a safety manager on a review of a decision under subsection (4) is not appealable to the appeal board. Quiz_________________? Alternative safety approaches - Answer (1) A proposal for an alternative safety approach must be submitted to a safety manager in the form and in the manner acceptable to the safety manager. (2) In accordance with the regulations and sections 34 and 35, a safety manager may accept a proposed alternative safety approach if (a) the safety manager considers that the proposed alternative safety approach limits the risk of personal injury or damage to property to a level that is consistent with the objectives of this Act and the regulations made under it, and (b) in all the circumstances, the safety manager is satisfied that the proposed alternative safety approach should be accepted. (3) If a safety manager accepts an alternative safety approach, (a) the proponent is exempt from one or more requirements of the regulations as set out in the alternative safety approach, if any, except as modified by the safety manager, (b) the exemption under paragraph (a) continues for the time set out in the alternative safety approach, except (i) as modified by the safety manager, (ii) during any period the alternative safety approach is suspended, or (iii) if the alternative safety approach is cancelled, and (c) any matter addressed in the alternative safety approach may be inspected for the purpose of determining the following: (i) whether the proponent is complying with the requirements, terms and conditions of the alternative safety approach; (ii) the extent to which the alternative safety approach is meeting the objectives of this Act and the regulations made under it. (4) The proponent of an accepted alternative safety approach is responsible for ensuring that persons who undertake regulated work or use a regulated product that is the subject of the alternative safety approach comply with the requirements, terms and conditions of that alternative safety approach. (5) If Quiz_________________? When a provincial safety manager may accept an alternative safety approach - Answer (1) Unless section 35 (1) applies, a provincial safety manager may accept an alternative safety approach that applies to any area of British Columbia, including an area in which this Act and the regulations are administered by a local government. (2) A provincial safety manager may accept an alternative safety approach that applies to more than one discipline as defined by regulation under section 2 (c). (3) A provincial safety manager may accept an alternative safety approach if more than one administrator would have administrative responsibility for the alternative safety approach because it relates to more than one site. (4) For the purposes of subsection (3), "administrator" means either of the following: (a) the minister; (b) a local government to which administration of this Act and the regulations is delegated under section 5.