SDEP Stormwater
_____are the final line of protection and one of the most seen and upkeep-intensive BMPs
on an active production web site. - ANS-Perimeter controls
A _______is intended to divert overland sheet flow to a stabilized outlet or a
sediment-trapping facility at some stage in the status quo of permanent stabilization on
sloping, disturbed regions. - ANS-transient diversion berm
A detention basin is designed to save stormwater on website and then _________. -
ANS-Release at a managed price
A floating turbidity barrier/curtain is designed to ______sediment encumbered water and
permit enough _____for sediments to settle out of suspension. - ANS-Contain/Time
A paved flume should have hydrostatic alleviation holes when seasonal high water desk or
seepage from slopes is a challenge. - ANS-True
A silt fence should simplest be mounted for sediment seize under ______conditions. -
ANS-Sheet Flow
A stand of permanent grass plant life is taken into consideration hooked up after two mowing
activities. - ANS-False
A stand of plant life is taken into consideration fully established after how lengthy? - ANS-1
yr
A stormwater conveyance channel is a constructed waterway. What sort of lining have to it
have? - ANS-Erosion resistant
A transient sediment lure must have an preliminary storage extent of _____ cubic yards or
_____ cubic toes consistent with acre of drainage location, measured from the low point of
the floor to the crest of the gravel outlet? - ANS-134/three,six hundred
Along with clearing, grading and excavating, the FDEP has determined that _____
additionally meet the definition of creation activity. - ANS-demolition activities
An instance of a bodily effect of abrasion and sedimentation is: - ANS-Increased flooding.
An important principle of erosion and sediment manipulate is to implement an intensive
______ and _________program. - ANS-Maintenance & Follow-Up
An outlet protection device is designed to save you scour at shops and limit erosion
downstream by way of reducing the _____of concentrated stormwater flows. - ANS-Velocity
, Apply _______practices to save you excessive on-web page damage. - ANS-Erosion
Control
Before making use of topsoil, what have to be carried out to the subsoil to insure proper
bonding with the topsoil? - ANS-Discing and Scarifying
Best Management Practices (BMPs) are not essential for a site smaller than one acre. -
ANS-False
Best Management Practices (BMPs) for erosion and sedimentation control consist of which
of the subsequent? - ANS-Silt fence and soil stabilization.
BMP renovation sports can be labeled into classes which include __________. - ANS-All of
the above
Clogged fish gills and decreased mild for aquatic flora are examples of organic
consequences of abrasion and sedimentation. - ANS-True
Curb inlet safety gadgets have to have an overflow area on the way to prevent flooding. -
ANS-True
Dewatering techniques for managing nonstormwater discharges and disposing of
accumulated stormwater from depressed regions at a construction website consist of: -
ANS-All of the above
During production, how often should inlets, outlets, and other manage structures be
inspected? - ANS-Weekly (each 7 days) and After each 1/2" or greater rain storm
During Phase I of web site improvement even the smallest sites will require the installation of
practices previous to website online clearing and grading. - ANS-Perimeter Control
During the building production stage, worries for the inspector are: - ANS-Increased Traffic
and Excavation
Erosion is - ANS-The system by way of which the land surface is worn away through the
movement of wind, water, and gravity.
For a type III turbidity barrier set up, where are the anchor strains connected? - ANS-Buoy
For proper installation of a silt fence, a trench _____inches deep and ______inches wide
must be excavated. This will allow the _______inches of cloth to be buried. - ANS-four" D x
four" W; 8"
How lengthy does the operator should update or revise the stormwater pollution prevention
plan (SWPPP) when website online conditions have modified? - ANS-7 Days
_____are the final line of protection and one of the most seen and upkeep-intensive BMPs
on an active production web site. - ANS-Perimeter controls
A _______is intended to divert overland sheet flow to a stabilized outlet or a
sediment-trapping facility at some stage in the status quo of permanent stabilization on
sloping, disturbed regions. - ANS-transient diversion berm
A detention basin is designed to save stormwater on website and then _________. -
ANS-Release at a managed price
A floating turbidity barrier/curtain is designed to ______sediment encumbered water and
permit enough _____for sediments to settle out of suspension. - ANS-Contain/Time
A paved flume should have hydrostatic alleviation holes when seasonal high water desk or
seepage from slopes is a challenge. - ANS-True
A silt fence should simplest be mounted for sediment seize under ______conditions. -
ANS-Sheet Flow
A stand of permanent grass plant life is taken into consideration hooked up after two mowing
activities. - ANS-False
A stand of plant life is taken into consideration fully established after how lengthy? - ANS-1
yr
A stormwater conveyance channel is a constructed waterway. What sort of lining have to it
have? - ANS-Erosion resistant
A transient sediment lure must have an preliminary storage extent of _____ cubic yards or
_____ cubic toes consistent with acre of drainage location, measured from the low point of
the floor to the crest of the gravel outlet? - ANS-134/three,six hundred
Along with clearing, grading and excavating, the FDEP has determined that _____
additionally meet the definition of creation activity. - ANS-demolition activities
An instance of a bodily effect of abrasion and sedimentation is: - ANS-Increased flooding.
An important principle of erosion and sediment manipulate is to implement an intensive
______ and _________program. - ANS-Maintenance & Follow-Up
An outlet protection device is designed to save you scour at shops and limit erosion
downstream by way of reducing the _____of concentrated stormwater flows. - ANS-Velocity
, Apply _______practices to save you excessive on-web page damage. - ANS-Erosion
Control
Before making use of topsoil, what have to be carried out to the subsoil to insure proper
bonding with the topsoil? - ANS-Discing and Scarifying
Best Management Practices (BMPs) are not essential for a site smaller than one acre. -
ANS-False
Best Management Practices (BMPs) for erosion and sedimentation control consist of which
of the subsequent? - ANS-Silt fence and soil stabilization.
BMP renovation sports can be labeled into classes which include __________. - ANS-All of
the above
Clogged fish gills and decreased mild for aquatic flora are examples of organic
consequences of abrasion and sedimentation. - ANS-True
Curb inlet safety gadgets have to have an overflow area on the way to prevent flooding. -
ANS-True
Dewatering techniques for managing nonstormwater discharges and disposing of
accumulated stormwater from depressed regions at a construction website consist of: -
ANS-All of the above
During production, how often should inlets, outlets, and other manage structures be
inspected? - ANS-Weekly (each 7 days) and After each 1/2" or greater rain storm
During Phase I of web site improvement even the smallest sites will require the installation of
practices previous to website online clearing and grading. - ANS-Perimeter Control
During the building production stage, worries for the inspector are: - ANS-Increased Traffic
and Excavation
Erosion is - ANS-The system by way of which the land surface is worn away through the
movement of wind, water, and gravity.
For a type III turbidity barrier set up, where are the anchor strains connected? - ANS-Buoy
For proper installation of a silt fence, a trench _____inches deep and ______inches wide
must be excavated. This will allow the _______inches of cloth to be buried. - ANS-four" D x
four" W; 8"
How lengthy does the operator should update or revise the stormwater pollution prevention
plan (SWPPP) when website online conditions have modified? - ANS-7 Days
