Page | 1
FLORIDA BRT CORRECTIONS
FIREARMS EXAM BRAND NEW
OFFICIAL QUESTIONS WITH
ANSWERS.
To correct a double feed in a shotgun - correct answer -press
down on the nose of the shell on the carrier to expose the base of
the shell still partially in the magazine tube; with your finger, push
that shell back into the magazine tube until it locks in place (must
be done through the ejection port)
Conditions that cause a failure to fire in a shotgun - correct
answer -the safety is on, the chamber is empty, the round is bad,
or the firing pin is broken
A failure to extract ina shotgun occurs - correct answer -when the
shotgun fails to extract a spent casing from its chamber at the
same time it tries to feed a new round into the chamber dues to a
broken extractor or a worn extractor hook
, Page | 2
A failure to open - correct answer -occurs when the shotgun's
fore-end/slide will not cycle, and the shotgun will not open
Causes of a failure to open in a shotgun include - correct answer -
not firing a round to release the fore-end/slide, failing to depress
the fore-end/slide release, or an improperly maintained weapon
A failure to eject in a shotgun occurs - correct answer -when an
ejector is missing or broken, the shell is swollen and will not
extract, or an ejector is bent or improperly positioned
A stovepipe in a shotgun is caused by - correct answer -when you
do not cycle the action properly
Semiautomatic pistol and revolver cleaning kit could include -
correct answer -a bore brush, solvent, gun-cleaning patches,
nylon cleaning brush, bore snake, cleaning pad, gun oil/lubricant,
rags, pipe cleaners, and cotton swabs
, Page | 3
Shotgun cleaning kit could include - correct answer -a bore brush,
gun-cleaning patches, lubricant, bore snake, cleaning rod, gun
solvent, and cloth
Nomenclature of the semiautomatic rifle/carbine - correct answer -
• barrel
• bolt (internal part)
• bolt lock lever
• buffer/buffer spring (internal part)
• butt
• chamber (internal part)
• charging handle
• ejection port (internal part)
• ejector
• extractor
• forestock/hand guard
• forward assist
• lower receiver group
• magazine
• magazine release
• magazine well (internal part)
• muzzle flash supressor
• safety
, Page | 4
• sights (front and rear)
• sling swivels
• stock
• takedown pins
• trigger
• trigger group
• trigger guard
• upper receiver group
A semiautomatic gas-operated AR-15 style rifle functions by -
correct answer -using the pressurized gas from a fired cartridge
tapped from the barrel as the bullet moves past a gas port located
under the rifle's front sight base
Cycle of operation (semiautomatic rifle/carbine) - correct answer -
• loading
• feeding/chambering
• locking
• firing
• unlocking
• extracting
• ejecting
FLORIDA BRT CORRECTIONS
FIREARMS EXAM BRAND NEW
OFFICIAL QUESTIONS WITH
ANSWERS.
To correct a double feed in a shotgun - correct answer -press
down on the nose of the shell on the carrier to expose the base of
the shell still partially in the magazine tube; with your finger, push
that shell back into the magazine tube until it locks in place (must
be done through the ejection port)
Conditions that cause a failure to fire in a shotgun - correct
answer -the safety is on, the chamber is empty, the round is bad,
or the firing pin is broken
A failure to extract ina shotgun occurs - correct answer -when the
shotgun fails to extract a spent casing from its chamber at the
same time it tries to feed a new round into the chamber dues to a
broken extractor or a worn extractor hook
, Page | 2
A failure to open - correct answer -occurs when the shotgun's
fore-end/slide will not cycle, and the shotgun will not open
Causes of a failure to open in a shotgun include - correct answer -
not firing a round to release the fore-end/slide, failing to depress
the fore-end/slide release, or an improperly maintained weapon
A failure to eject in a shotgun occurs - correct answer -when an
ejector is missing or broken, the shell is swollen and will not
extract, or an ejector is bent or improperly positioned
A stovepipe in a shotgun is caused by - correct answer -when you
do not cycle the action properly
Semiautomatic pistol and revolver cleaning kit could include -
correct answer -a bore brush, solvent, gun-cleaning patches,
nylon cleaning brush, bore snake, cleaning pad, gun oil/lubricant,
rags, pipe cleaners, and cotton swabs
, Page | 3
Shotgun cleaning kit could include - correct answer -a bore brush,
gun-cleaning patches, lubricant, bore snake, cleaning rod, gun
solvent, and cloth
Nomenclature of the semiautomatic rifle/carbine - correct answer -
• barrel
• bolt (internal part)
• bolt lock lever
• buffer/buffer spring (internal part)
• butt
• chamber (internal part)
• charging handle
• ejection port (internal part)
• ejector
• extractor
• forestock/hand guard
• forward assist
• lower receiver group
• magazine
• magazine release
• magazine well (internal part)
• muzzle flash supressor
• safety
, Page | 4
• sights (front and rear)
• sling swivels
• stock
• takedown pins
• trigger
• trigger group
• trigger guard
• upper receiver group
A semiautomatic gas-operated AR-15 style rifle functions by -
correct answer -using the pressurized gas from a fired cartridge
tapped from the barrel as the bullet moves past a gas port located
under the rifle's front sight base
Cycle of operation (semiautomatic rifle/carbine) - correct answer -
• loading
• feeding/chambering
• locking
• firing
• unlocking
• extracting
• ejecting
