WGU D469 Objective Assessment Final Exam
Newest 2025/2026 With Complete 100 Questions
And Correct Answers |Already Graded
A+||Brand New Version!|
1. The angled dashed line drawn near the midpoint of a door elevation
indicates the _________ side of the door or cabinet door.
a. door knob
b. sill
c. astragal
d. hinge
e. closer
d. hinge
2. In drawing elevations, the width of a wall or room is best dimensioned
on the _____________.
a. the elevation
b. wall section
c. building section
,2|Page
d. floor plan
e. cabinetry drawings
d. floor plan
3. Interior elevations can be named ____________________________.
a. by compass direction only
b. to match the exterior elevations
c. in several different ways
d. by room name only
e. according to the designer's whim
c. in several different ways
4. When drawing interior elevations of doors, windows, and built-in
cabinetry, such as in a kitchen, bath, or office, ___________ lines are
used to indicate hinge location and door swings.
a. light
b. solid, dark
c. jagged
d. dashed
e. curved
d. dashed
,3|Page
5. In drawing elevations, one should draw the outline (profile) of the
elevation with a ___________, as it represents the outermost limits of
the drawing.
a. transparent
b. dark
c. medium
d. light
e. dashed
b. dark
6. Exterior building elevations are usually titled according to the
__________________ they are facing.
a. opposite direction
b. compass direction
c. the owner's choice
d. street
e. name of the building
b. compass direction
, 4|Page
7. In specialized drawings (such as interior elevations in the kitchen and
bath industry), cabinetry, doors, windows, and other items are
dimensioned primarily in _________ (or metric).
a. feet
b. inches
c. modular
d. yards
e. fractions
b. inches
8. In elevation drawings, notes describing materials, such as ceramic tile,
are _________ in most cases.
a. very detailed
b. generic
c. left off the drawing
d. italicized
e. lettered in lower case fonts
b. generic
9. Generally, interior elevations are drawn to the same scale as the
_________________.