Real Exam Questions & Answers | 100% Verified
solutions |Questions with Correct Answers 2025
latest Exam Version!!
What NAT port range does 3CX use for audio? - ANSWER-9000
- 10999 UDP
If you want to use the 3CX app or use an SBC you will need to
open the PBX
tunnel port. The default TCP/UDP port is? -
ANSWER-5090
If you want to use the 3CX app or use an SBC you will need to
open the HTTPS
port. The default TCP port is? -
ANSWER-5001
To enable the use of 3CX webmeeting you will need to allow
outbound traffic to
... - ANSWER-
webmeeting.3cx.net:443
, 3CX Webmeeting requires that the HTTPS Port is open for TCP
traffic, which
port is this? -
ANSWER-5001
Port ... TCP is used to provision IP phones - ANSWER-5001
To perform remote configuration of the PBX you will need
to allow inbound
traffic on port ... TCP for the duration of the setup. -
ANSWER-5015
On the dashbard of the 3CX Management console we can check
to see if the ...
has been configured correctly. -
ANSWER-Firewall
Running the Firewall check will ... the PBX services while
testing. - ANSWER-
stop
What does the Firewall checker test? - ANSWER-Full
cone NAT, Port