Stuvia.com - The Marketplace to Buy and Sell your Study Material
ELECTRONICS SECURITY TECHNICIAN LEVEL 1 EXAM NEWEST 2025 ACTUAL EXAM COMPLETE 100
QUESTIONS AND CORRECT ANSWERS
When a standard is adopted by an agency having authority, the standard becomes a _____ and may
contain requirements for alarm installations. - (answer) Code
Prior to working in a particular jurisdiction, alarm technicians should consult _____ - (answer) All of the
above: Statutes, Ordinances, and Board Rules
An organization, office, or individual responsible for enforcing the requirements of a code or standard, or
for approving equipment, materials, an installation, or a procedure, is known as the _____. - (answer)
Authority Having Jurisdiction (AHJ)
An organization's or association's published guideline containing recommended installation practices is
known as _____. - (answer) a Standard
True or False? The term "shall" when found in code is something that must be done, while the term
"should" is a recommendation. - (answer) True
Electrons have what type of charge? - (answer) Negative
Where are valence electrons located? - (answer) in the outer shell
True or False? Stable atoms have the outer electron shells completely filled. - (answer) True
What is the unit of measurement for resistance? - (answer) Ohms (Ω)
What is the relationship between resistance and conductance? - (answer) Conductance = 1 / resistance
In a _____ circuit, electrons have one or more paths. - (answer) Parallel
_____ is the same at all points in a series circuit. - (answer) Current
Downloaded by: Splashnetz | Want to earn $1.236
Distribution of this document is illegal extra per year?
, Stuvia.com - The Marketplace to Buy and Sell your Study Material
ELECTRONICS SECURITY TECHNICIAN LEVEL 1 EXAM NEWEST 2025 ACTUAL EXAM COMPLETE 100
QUESTIONS AND CORRECT ANSWERS
In a series circuit, _____ is additive. - (answer) Resistance
In the circuit shown above, the volt meter would measure ________ volts.
(12V with R1 = 20 ohms, R2 = 20 ohms, and R4 = 20 ohms) - (answer) 4 volts
True or False? In a series circuit, the total of all voltage drops is always equal to the supplied voltage. -
(answer) True
To convert kilo-ohms to ohms, the provided value must be _____ _____ 1,000. - (answer) multiplied by
Convert 500 milliamps to amps.
(500 divided by 1000) - (answer) 0.5 amps
The symbol used to represent _____ is the Greek letter omega. - (answer) Resistance (ohms)
In the Ohm's Law formula the I used to represent current stands for _____. - (answer) Intensity
What is the total resistance of the above circuit?
(Resistance is measured in ohms. Resistance is additive, so add all ohms together)
(R1 = 20 ohms, R2 = 40 ohms, R4 = 60 ohms)
20 + 40 + 60 = ____ - (answer) 120 ohms of resistance
A transformer is used to _____ voltage in a circuit - (answer) increase or decrease
A loose electrical connection will raise resistance in a circuit. What other factor will raise as a result? -
(answer) the temperature
Downloaded by: Splashnetz | Want to earn $1.236
Distribution of this document is illegal extra per year?
ELECTRONICS SECURITY TECHNICIAN LEVEL 1 EXAM NEWEST 2025 ACTUAL EXAM COMPLETE 100
QUESTIONS AND CORRECT ANSWERS
When a standard is adopted by an agency having authority, the standard becomes a _____ and may
contain requirements for alarm installations. - (answer) Code
Prior to working in a particular jurisdiction, alarm technicians should consult _____ - (answer) All of the
above: Statutes, Ordinances, and Board Rules
An organization, office, or individual responsible for enforcing the requirements of a code or standard, or
for approving equipment, materials, an installation, or a procedure, is known as the _____. - (answer)
Authority Having Jurisdiction (AHJ)
An organization's or association's published guideline containing recommended installation practices is
known as _____. - (answer) a Standard
True or False? The term "shall" when found in code is something that must be done, while the term
"should" is a recommendation. - (answer) True
Electrons have what type of charge? - (answer) Negative
Where are valence electrons located? - (answer) in the outer shell
True or False? Stable atoms have the outer electron shells completely filled. - (answer) True
What is the unit of measurement for resistance? - (answer) Ohms (Ω)
What is the relationship between resistance and conductance? - (answer) Conductance = 1 / resistance
In a _____ circuit, electrons have one or more paths. - (answer) Parallel
_____ is the same at all points in a series circuit. - (answer) Current
Downloaded by: Splashnetz | Want to earn $1.236
Distribution of this document is illegal extra per year?
, Stuvia.com - The Marketplace to Buy and Sell your Study Material
ELECTRONICS SECURITY TECHNICIAN LEVEL 1 EXAM NEWEST 2025 ACTUAL EXAM COMPLETE 100
QUESTIONS AND CORRECT ANSWERS
In a series circuit, _____ is additive. - (answer) Resistance
In the circuit shown above, the volt meter would measure ________ volts.
(12V with R1 = 20 ohms, R2 = 20 ohms, and R4 = 20 ohms) - (answer) 4 volts
True or False? In a series circuit, the total of all voltage drops is always equal to the supplied voltage. -
(answer) True
To convert kilo-ohms to ohms, the provided value must be _____ _____ 1,000. - (answer) multiplied by
Convert 500 milliamps to amps.
(500 divided by 1000) - (answer) 0.5 amps
The symbol used to represent _____ is the Greek letter omega. - (answer) Resistance (ohms)
In the Ohm's Law formula the I used to represent current stands for _____. - (answer) Intensity
What is the total resistance of the above circuit?
(Resistance is measured in ohms. Resistance is additive, so add all ohms together)
(R1 = 20 ohms, R2 = 40 ohms, R4 = 60 ohms)
20 + 40 + 60 = ____ - (answer) 120 ohms of resistance
A transformer is used to _____ voltage in a circuit - (answer) increase or decrease
A loose electrical connection will raise resistance in a circuit. What other factor will raise as a result? -
(answer) the temperature
Downloaded by: Splashnetz | Want to earn $1.236
Distribution of this document is illegal extra per year?
