PA APPRAISAL LICENSE EXAM
QUESTIONS AND CORRECT
ANSWERS|ACCURATE ACTUAL
EXAM WITH FREQUENTLY
TESTED QUESTIONS AND STUDY
GUIDE
Save
Terms in this set (202)
How is a By pulling the damage for length.
diamond Diamond is a length condition
condition fixed?
,When Width is calculated from the center
measuring a out, so a value of -111mm on the left
unibody vehicle, rail shows sway to the right and in
it is discovered toward centerline
that the left
front rail is
111mm from
spec in width.
What condition
is this?
A collision- Twist condition
damaged
vehicle is
discovered to
be down in
height at the
opposite end of
the center
section. What
condition is this
frame in?
, When Tech A. When a frame rail's
diagnosing the relationship to the vehicle
damage to a full centerline is changed, such as
frame assembly pushed either to the left or
on a sport utility right, the condition is known as
vehicle, it is sway. "Twist" refers to the condition
determined that of the frame when entire sections
the left side are driven higher or lower than the
frame rail is opposite side.
higher than the
right side frame
rail. Technician
A says the
damaged state
is known as a
twist condition.
Technician B
says a sway
condition exists.
Who is right?
QUESTIONS AND CORRECT
ANSWERS|ACCURATE ACTUAL
EXAM WITH FREQUENTLY
TESTED QUESTIONS AND STUDY
GUIDE
Save
Terms in this set (202)
How is a By pulling the damage for length.
diamond Diamond is a length condition
condition fixed?
,When Width is calculated from the center
measuring a out, so a value of -111mm on the left
unibody vehicle, rail shows sway to the right and in
it is discovered toward centerline
that the left
front rail is
111mm from
spec in width.
What condition
is this?
A collision- Twist condition
damaged
vehicle is
discovered to
be down in
height at the
opposite end of
the center
section. What
condition is this
frame in?
, When Tech A. When a frame rail's
diagnosing the relationship to the vehicle
damage to a full centerline is changed, such as
frame assembly pushed either to the left or
on a sport utility right, the condition is known as
vehicle, it is sway. "Twist" refers to the condition
determined that of the frame when entire sections
the left side are driven higher or lower than the
frame rail is opposite side.
higher than the
right side frame
rail. Technician
A says the
damaged state
is known as a
twist condition.
Technician B
says a sway
condition exists.
Who is right?
