CWB Level 1 Weld Symbols Exam 2025/2026 – 100+ Verified Q&A | Fillet & Groove Symbols, Field Welds, Reference Lines, NDE Symbols, ISO 2553 Standards

CWB Level 1 Weld Symbols 2025/2026
Exam Questions and Answers 100%
Guaranteed Success | Already Rated A+



A weld symbol for a fillet weld has the vertical line to the left of the symbol.

(True/False) - 🧠 ANSWER ✔✔true


Arrow side significance will have the weld symbol on the top of the reference line.

(True/False) - 🧠 ANSWER ✔✔false


The tail of a welding symbol is optional. (True/False) - 🧠 ANSWER ✔✔true


ISO 2553 System A symbolic representation consists of one solid and one dashed

reference line in parallel. (True/False) - 🧠 ANSWER ✔✔true


When using a combination of weld symbols, the order of progression starts closest

to the reference line? (True/False) - 🧠 ANSWER ✔✔true

,What is the meaning of a black flag at the intersect of the reference line and the

arrow line orientated on the top side of a welding symbol? (Multiple choice)

Question 9 options:A) Inspection required in the field.B) Fillet weld to be

completed in the field.C) Field weld on the other side of the joint.D) Weld to be

completed in the field. - 🧠 ANSWER ✔✔


A weld symbol provides the necessary information to complete the joint

preparation. (True/False) - 🧠 ANSWER ✔✔false


What information can a weld symbol NOT provide? (Multiple choice)

Question 11 options:A) Joint preparation and geometry.B) Weld size and length.C)

Bolt hole locations.D) Weld penetration and fusion. - 🧠 ANSWER ✔✔C) Bolt hole

locations.

What type of symbol is used to express that a weld is to be completed in the field?

(Multiple choice)

Question 13 options:A) A secondary welding symbol.B) A welding symbol.C) A

basic welding symbol.D) A supplementary symbol. - 🧠 ANSWER ✔✔D) A

supplementary symbol.

Where would the length of a test section be indicated? (Multiple choice)

, 3


Question 14 options:A) To the left of the symbol.B) To the right of the symbol.C)

Above the symbol.D) In the tail of the symbol. - 🧠 ANSWER ✔✔B) To the right

of the symbol.

How is a request of test all around in the field indicated on a reference line?

(Multiple choice)

Question 15 options:A) With a statement indicating test all around in the field is

located in the tail of a reference line.B) With a field weld symbol connected to the

reference and arrow line intersect with test all around indicated in the tail.C) With

a test all around symbol centred wher the reference and arrow line intersect with

the test in field flag attached to the all around symbol.D) With a test all around

symbol centred where the reference and arrow line intersect with the test in field

flag attached to reference and arrow intersect. - 🧠 ANSWER ✔✔C) With a test all

around symbol centred wher the reference and arrow line intersect with the test in

field flag attached to the all around symbol.

Where is a percentage of NDE requested? (Multiple choice)

Question 16 options:A) To the left of a NDE symbol.B) To the left of an NDE

designation.C) To the right of an NDE designation.D) Above the NDE designation.

- 🧠 ANSWER ✔✔C) To the right of an NDE designation.



COPYRIGHT©PROFFKERRYMARTIN 2025/2026. YEAR PUBLISHED 2025. COMPANY REGISTRATION NUMBER: 619652435. TERMS OF USE.
PRIVACY STATEMENT. ALL RIGHTS RESERVED