EPA 608 Free Practice Test 10: Type 2
UPDATED ACTUAL Exam Questions and
CORRECT Answers
If the system requires more than one pressure relief valve, never install the valves in ______: -
CORRECT ANSWER series
If the system has a leak, you do have to recover to below atmospheric pressure: - CORRECT
ANSWER false
Recovery units remove the refrigerant in: - CORRECT ANSWER either as a liquid or as a
vapor
The compressor is directly ______ of the accumulator - CORRECT ANSWER downstream
Refrigerant leaves the condenser as a saturate liquid or a slightly _______ liquid - CORRECT
ANSWER subcooled
When the system is shut down, refrigerant accumulates in the _______ part of the system. -
CORRECT ANSWER coldest
oil absorbs more refrigerant when the temperature goes down - CORRECT ANSWER true
Recovery of the refrigerant in ______ will be faster: - CORRECT ANSWER Liquid phase
High-Pressure Appliance normally containing 200 pounds or more of refrigerant, ______ Inches
of vacuum that recovery or recycling equipment must achieve if Recovery or Recycling
equipment was manufactured before 11/15/93 - CORRECT ANSWER 4.0
UPDATED ACTUAL Exam Questions and
CORRECT Answers
If the system requires more than one pressure relief valve, never install the valves in ______: -
CORRECT ANSWER series
If the system has a leak, you do have to recover to below atmospheric pressure: - CORRECT
ANSWER false
Recovery units remove the refrigerant in: - CORRECT ANSWER either as a liquid or as a
vapor
The compressor is directly ______ of the accumulator - CORRECT ANSWER downstream
Refrigerant leaves the condenser as a saturate liquid or a slightly _______ liquid - CORRECT
ANSWER subcooled
When the system is shut down, refrigerant accumulates in the _______ part of the system. -
CORRECT ANSWER coldest
oil absorbs more refrigerant when the temperature goes down - CORRECT ANSWER true
Recovery of the refrigerant in ______ will be faster: - CORRECT ANSWER Liquid phase
High-Pressure Appliance normally containing 200 pounds or more of refrigerant, ______ Inches
of vacuum that recovery or recycling equipment must achieve if Recovery or Recycling
equipment was manufactured before 11/15/93 - CORRECT ANSWER 4.0
