GENERAL AND HOUSEHOLD PEST MANAGEMENT 7A IOWA WITH
100% RATED CORRECT REAL EXAM QUESTIONS AND CORRECT
ANSWERS| GRADED A+ |2025 LATEST VERSION | 100% VERIFIED
Define integrated pest management, threshold, harborage, bait. - (answer)A
systematic approach to pest control that uses all reasonable pest control methods in
an environmentally compatible and economically feasible manner to reduce or
eliminate pest populations. Thresholds mark the highest acceptable point a pest
population can reach without risk of damage to people or the environment.
Harborages are locations where pests seek shelter. Bait is a food or other substance
used to attract a pest to a pesticide or a trap.
Tell the difference between gradual and complete metamorphosis. -
(answer)Gradual metamorphosis involves less extreme changes in an insect and
usually involves a change in size. It has three stages: egg, nymph, and adult.
Complete metamorphosis has four stages: egg, larva, pupa, and adult.
Identify four places to inspect to look for pests or evidence of pest activity. -
(answer)Cracks and crevices, behind/under appliances, in cluttered areas, and
along utility lines.
,List five tools needed during a facility inspection. - (answer)Flashlight, Black light,
magnifying glass/hand lens, access tools such as screwdrivers, and a clipboard with
paper and pen.
List several monitoring techniques used in pest management. - (answer)Flushing
agents, sticky traps, pheromone traps, mechanical traps, light traps, and product
inspection.
Give examples of food handling establishments requiring pest control. -
(answer)Restaurants, cafeterias, bars, military mess halls, food trucks.
Distinguish between the following treatment types: spot and crack and crevice;
void and space; barrier and bait. - (answer)Spot treatment the application to a small
area no larger than two square feet. Crack and crevice application occurs in cracks
and crevices that pests may seek shelter in or enter the facility through. Void
treatment is applied in very small gaps and areas such as a small gap in a furniture
piece. Space treatments involves a larger scale of application and is delivered via
,aerosols. Barrier applications are meant to stop insects from entering a building
through the exterior ground level. Bait treatment is designed to lure pests into
traps.
State three types of application equipment that could be used in a perimeter
treatment. - (answer)Backpack sprayers, compressed air sprayers, large capacity
sprayers
Discuss where to use hand-held dusters versus power dusters inside a structure. -
(answer)power dusters are more useful for dusting a large area such as an attic or
pipe systems. Hand held dusters are better for smaller target areas.
Explain the two types of ultra-low volume application devices. - (answer)Cold
foggers use spinning rotors or discs to break liquid into small droplets which are
then forced out of the device. Thermal foggers use heat to vaporize insecticide
concentrate. When the heated vapors exit the equipment, they cool and condense
into particles ranging from 1 to 10 microns in diameter.
, Tell the importance of equipment maintenance in pest management programs. -
(answer)Cleaning equipment maintains its efficiency and professional appearance.
It also improves the life of the machine.
Define, thigmotactic; oothecae; gregarious - (answer)The thigmotactic response of
cockroaches means that they like to be where they can touch surfaces both above
and below them. Oothecae is the term for the bean-shaped egg cases they lay.
Gregarious means that they like to travel in groups.
Explain the health concerns associated with cockroach infestations. -
(answer)Cockroaches may carry bacteria to and from food sources which may
cause food-born illnesses.
Identify four common, structure-infesting cockroach species. - (answer)German
cockroach, brown-banded cockroach, american cockroach, oriental cockroach.
Identify the cockroach species that can be found accidentally in a structure. -
(answer)Wood cockroaches
100% RATED CORRECT REAL EXAM QUESTIONS AND CORRECT
ANSWERS| GRADED A+ |2025 LATEST VERSION | 100% VERIFIED
Define integrated pest management, threshold, harborage, bait. - (answer)A
systematic approach to pest control that uses all reasonable pest control methods in
an environmentally compatible and economically feasible manner to reduce or
eliminate pest populations. Thresholds mark the highest acceptable point a pest
population can reach without risk of damage to people or the environment.
Harborages are locations where pests seek shelter. Bait is a food or other substance
used to attract a pest to a pesticide or a trap.
Tell the difference between gradual and complete metamorphosis. -
(answer)Gradual metamorphosis involves less extreme changes in an insect and
usually involves a change in size. It has three stages: egg, nymph, and adult.
Complete metamorphosis has four stages: egg, larva, pupa, and adult.
Identify four places to inspect to look for pests or evidence of pest activity. -
(answer)Cracks and crevices, behind/under appliances, in cluttered areas, and
along utility lines.
,List five tools needed during a facility inspection. - (answer)Flashlight, Black light,
magnifying glass/hand lens, access tools such as screwdrivers, and a clipboard with
paper and pen.
List several monitoring techniques used in pest management. - (answer)Flushing
agents, sticky traps, pheromone traps, mechanical traps, light traps, and product
inspection.
Give examples of food handling establishments requiring pest control. -
(answer)Restaurants, cafeterias, bars, military mess halls, food trucks.
Distinguish between the following treatment types: spot and crack and crevice;
void and space; barrier and bait. - (answer)Spot treatment the application to a small
area no larger than two square feet. Crack and crevice application occurs in cracks
and crevices that pests may seek shelter in or enter the facility through. Void
treatment is applied in very small gaps and areas such as a small gap in a furniture
piece. Space treatments involves a larger scale of application and is delivered via
,aerosols. Barrier applications are meant to stop insects from entering a building
through the exterior ground level. Bait treatment is designed to lure pests into
traps.
State three types of application equipment that could be used in a perimeter
treatment. - (answer)Backpack sprayers, compressed air sprayers, large capacity
sprayers
Discuss where to use hand-held dusters versus power dusters inside a structure. -
(answer)power dusters are more useful for dusting a large area such as an attic or
pipe systems. Hand held dusters are better for smaller target areas.
Explain the two types of ultra-low volume application devices. - (answer)Cold
foggers use spinning rotors or discs to break liquid into small droplets which are
then forced out of the device. Thermal foggers use heat to vaporize insecticide
concentrate. When the heated vapors exit the equipment, they cool and condense
into particles ranging from 1 to 10 microns in diameter.
, Tell the importance of equipment maintenance in pest management programs. -
(answer)Cleaning equipment maintains its efficiency and professional appearance.
It also improves the life of the machine.
Define, thigmotactic; oothecae; gregarious - (answer)The thigmotactic response of
cockroaches means that they like to be where they can touch surfaces both above
and below them. Oothecae is the term for the bean-shaped egg cases they lay.
Gregarious means that they like to travel in groups.
Explain the health concerns associated with cockroach infestations. -
(answer)Cockroaches may carry bacteria to and from food sources which may
cause food-born illnesses.
Identify four common, structure-infesting cockroach species. - (answer)German
cockroach, brown-banded cockroach, american cockroach, oriental cockroach.
Identify the cockroach species that can be found accidentally in a structure. -
(answer)Wood cockroaches
