AUTOCAD Practice Exam / Actual Exam
Questions / Expert Strategies, Review of Key
Quizzes, And Practice Questions for
Guaranteed Success
Correct 39
100 %
Incorrect 00
AUTOCAD Practice Exam
Questions & Certified Answers
1 of 39
Term
Using the polyline option of the FILLET command inserts a fillet at each
vertex of a 2D polyline where two straight line segments meet, unless
the radius of the fillet is too large.
Give this one a try later!
, Yes New
Fit View
Don't know?
2 of 39
Term
Shift- clicking while using the EXTEND command will cause a TRIM
instead.
Give this one a try later!
View Linear
New Yes
Don't know?
3 of 39
Term
You have been asked to export a drawing as a PDF. Per the
requirements of the requester, the vector quality of the PDF must be at
, least 1600 dpi. Using the image below as a reference, select which of
the following processes can be used to achieve this requirement.
Give this one a try later!
Click the Options... button, then
Select the right grip of the rectangle,
set the Vector quality to 1600
then press Ctrl to cycle to the
dpi in the Export to PDF
Convert to arc option
Options dialog menu
1. Execute the GRIPBLOCK command
Select the spline, then right click and and set the value to 1
choose Spline > Convert to Polyline 2. Enable the Show grips within
blocks setting in the Options menu
Don't know?
4 of 39
Term
To move all selected object to the same layer without removing layers
use the....
To combine multiple layers into a single layer use...
Give this one a try later!
Circle: Center
Arc: Center
Questions / Expert Strategies, Review of Key
Quizzes, And Practice Questions for
Guaranteed Success
Correct 39
100 %
Incorrect 00
AUTOCAD Practice Exam
Questions & Certified Answers
1 of 39
Term
Using the polyline option of the FILLET command inserts a fillet at each
vertex of a 2D polyline where two straight line segments meet, unless
the radius of the fillet is too large.
Give this one a try later!
, Yes New
Fit View
Don't know?
2 of 39
Term
Shift- clicking while using the EXTEND command will cause a TRIM
instead.
Give this one a try later!
View Linear
New Yes
Don't know?
3 of 39
Term
You have been asked to export a drawing as a PDF. Per the
requirements of the requester, the vector quality of the PDF must be at
, least 1600 dpi. Using the image below as a reference, select which of
the following processes can be used to achieve this requirement.
Give this one a try later!
Click the Options... button, then
Select the right grip of the rectangle,
set the Vector quality to 1600
then press Ctrl to cycle to the
dpi in the Export to PDF
Convert to arc option
Options dialog menu
1. Execute the GRIPBLOCK command
Select the spline, then right click and and set the value to 1
choose Spline > Convert to Polyline 2. Enable the Show grips within
blocks setting in the Options menu
Don't know?
4 of 39
Term
To move all selected object to the same layer without removing layers
use the....
To combine multiple layers into a single layer use...
Give this one a try later!
Circle: Center
Arc: Center
