EpicCare Inpatient (INP402) ClinDoc JT questions
with verified answers
-when a clinician should be warned of upcoming documentation
-when documentation is considered due
-groups &/or rows that will appear with req doc icons next to them in
flowsheet activity Ans✓✓✓ List some details set when rules are
attached to a department.
.flow Ans✓✓✓ smartlink that Pulls in flowsheet data for the rows and
groups specified in the parameters. The information appears with line
breaks after each row.
"(1 AND 2) OR 3" - entered after choosing Custom Evaluation Logic
button in the Cascading Flowsheet section Ans✓✓✓ If you have 3
conditions listed & want cascade to trigger if either both lines 1 & 2 are
true or if line 3 is true, what (& where) would you enter?
<LDANAME> Ans✓✓✓ Enter this to display the name of the line, drain
or airway on a worklist
<ORDNAME> Ans✓✓✓ Enter this to cause the task to appear with the
name of the order that triggered it on a worklist
0- no restrictions (if left blank, this is the default)
,1- database only
2- facility only (not used often)
3- database & facility (common) Ans✓✓✓ What are the restriction
types you can use to limit user searches?
1 Ans✓✓✓ True or False? You want all Ambulate Patient tasks to
appear on the Brain regardless of their frequency (Q4H, QShift, etc),
therefore you need to create a task and task template for (1/each)
order.
1- Create LDA Property Rows
2- Create the Properties Group record; attach the standard properties
plus any additional from step 1
3- Create the Over-Time Assessment Rows used to document ongoing
assessments of the LDA
4- Create the LDA Group record; attach Properties record & all of the
ongoing assessment rows. Ans✓✓✓ In what order do you build an LDA
Group? (*note: shell placeholder groups are not needed)
1- create or copy the f/s template containing the groups you want to
override for certain users
2- open the group & override the rows that will appear for the new
template
,3- attach the new template to the user's profile (if this is a default
template) &/or add it to the f/s preference list affecting this user
Ans✓✓✓ How do you override default rows by user?
1- the profile preference list must include all templates needed becasue
they will not be able to use the Selection button to search
2- if you forget to assign a pref list in their profile, their tabs & default
settings are liited; they will likely receive the message "Flowsheet
template selection is disabled for this user." Ans✓✓✓ If you choose to
apply both database & facility restrictions, what implications must you
consider?
1-Be able to be documented by typing "WDL" or "X"
2-Provide a definition of defined limits for your organization
3-Cause rows to cascade (automatically, if appropriate) Ans✓✓✓ WDL
rows that cause rows to cascade should do what?
1. create "placeholder" flowsheet groups
2. build rows
3. attach rows to group
4. build template and attach groups Ans✓✓✓ 4 steps in building
flowsheet rows
1. create preference list record
, 2. attach list to a profile Ans✓✓✓ To change the templates that appear
under the Preference List tab, there are two steps:
1. create rows for properties LDA
2. create property group
3. create rows for assessments LDA
4. LDA group record
5. add LDA to template Ans✓✓✓ 5 LDA build steps
1. create title
2. create topics
3. create points and attach Ans✓✓✓ 3 education build steps
1. diagram of every record
2. build assessment flowsheet without cascading functionality
3. test work
4. add cascading
5. test cascade Ans✓✓✓ 5 steps in cascading flowsheet build
1. flowsheet group
2. assigned to ERX
3. assigned record to category title Ans✓✓✓ Dennis is a patient with
an active order for a titratable dobutamine drip. Whenever Nurse
with verified answers
-when a clinician should be warned of upcoming documentation
-when documentation is considered due
-groups &/or rows that will appear with req doc icons next to them in
flowsheet activity Ans✓✓✓ List some details set when rules are
attached to a department.
.flow Ans✓✓✓ smartlink that Pulls in flowsheet data for the rows and
groups specified in the parameters. The information appears with line
breaks after each row.
"(1 AND 2) OR 3" - entered after choosing Custom Evaluation Logic
button in the Cascading Flowsheet section Ans✓✓✓ If you have 3
conditions listed & want cascade to trigger if either both lines 1 & 2 are
true or if line 3 is true, what (& where) would you enter?
<LDANAME> Ans✓✓✓ Enter this to display the name of the line, drain
or airway on a worklist
<ORDNAME> Ans✓✓✓ Enter this to cause the task to appear with the
name of the order that triggered it on a worklist
0- no restrictions (if left blank, this is the default)
,1- database only
2- facility only (not used often)
3- database & facility (common) Ans✓✓✓ What are the restriction
types you can use to limit user searches?
1 Ans✓✓✓ True or False? You want all Ambulate Patient tasks to
appear on the Brain regardless of their frequency (Q4H, QShift, etc),
therefore you need to create a task and task template for (1/each)
order.
1- Create LDA Property Rows
2- Create the Properties Group record; attach the standard properties
plus any additional from step 1
3- Create the Over-Time Assessment Rows used to document ongoing
assessments of the LDA
4- Create the LDA Group record; attach Properties record & all of the
ongoing assessment rows. Ans✓✓✓ In what order do you build an LDA
Group? (*note: shell placeholder groups are not needed)
1- create or copy the f/s template containing the groups you want to
override for certain users
2- open the group & override the rows that will appear for the new
template
,3- attach the new template to the user's profile (if this is a default
template) &/or add it to the f/s preference list affecting this user
Ans✓✓✓ How do you override default rows by user?
1- the profile preference list must include all templates needed becasue
they will not be able to use the Selection button to search
2- if you forget to assign a pref list in their profile, their tabs & default
settings are liited; they will likely receive the message "Flowsheet
template selection is disabled for this user." Ans✓✓✓ If you choose to
apply both database & facility restrictions, what implications must you
consider?
1-Be able to be documented by typing "WDL" or "X"
2-Provide a definition of defined limits for your organization
3-Cause rows to cascade (automatically, if appropriate) Ans✓✓✓ WDL
rows that cause rows to cascade should do what?
1. create "placeholder" flowsheet groups
2. build rows
3. attach rows to group
4. build template and attach groups Ans✓✓✓ 4 steps in building
flowsheet rows
1. create preference list record
, 2. attach list to a profile Ans✓✓✓ To change the templates that appear
under the Preference List tab, there are two steps:
1. create rows for properties LDA
2. create property group
3. create rows for assessments LDA
4. LDA group record
5. add LDA to template Ans✓✓✓ 5 LDA build steps
1. create title
2. create topics
3. create points and attach Ans✓✓✓ 3 education build steps
1. diagram of every record
2. build assessment flowsheet without cascading functionality
3. test work
4. add cascading
5. test cascade Ans✓✓✓ 5 steps in cascading flowsheet build
1. flowsheet group
2. assigned to ERX
3. assigned record to category title Ans✓✓✓ Dennis is a patient with
an active order for a titratable dobutamine drip. Whenever Nurse
