Page | 1
CLASS 200 NEIEP FINAL 2025 QUESTIONS
AND ANSWERS.
1. The star symbol is used on the COP for what? - correct answer
- To designate the main floor
2. When using rope wedge clamps, which of the following must
be done? - correct answer - Use a wedge and socket sized
correctly for the rope
3. What is an effective method for checking pre-heated babbit
before pouring? - correct answer - Heat it to a point where it will
char a soft piece of pine
4. Which of the wire rope constructions listed below is the most
wear resistant? - correct answer - 6 X 19 Seale
5. How many seizings are required on each side of the cut for
preformed rope according to ASME? - correct answer - 1
, Page | 2
6. what is the constructional stretch of a 500 ft. fiber core, 8
strand rope rated at 3/4% (.0075) of rope stretch per 100 foot?
- correct answer - 3.75 ft. [ (100 X .0075)5 ]
7. When occupiable space is below the pit, what additional
equiment is required on the counterwieght? - correct answer -
Safeties
8. Of the types of rope listed, which one has wires preshaped to
fit the twist in the strands and has strands preshaped to fit the
twist in the rope? - correct answer - Preformed
9. If a hoist machine roped 1:1 is capable of running at 650 fpm,
with a capacity of 4500lbs, what would its capability be if roped
2:1? - correct answer - 325 fpm at 9000lbs
10. What functions can loadweighing transducers performs? -
correct answer - Adjust door times, bypass hall calls, and
adjust motor control
CLASS 200 NEIEP FINAL 2025 QUESTIONS
AND ANSWERS.
1. The star symbol is used on the COP for what? - correct answer
- To designate the main floor
2. When using rope wedge clamps, which of the following must
be done? - correct answer - Use a wedge and socket sized
correctly for the rope
3. What is an effective method for checking pre-heated babbit
before pouring? - correct answer - Heat it to a point where it will
char a soft piece of pine
4. Which of the wire rope constructions listed below is the most
wear resistant? - correct answer - 6 X 19 Seale
5. How many seizings are required on each side of the cut for
preformed rope according to ASME? - correct answer - 1
, Page | 2
6. what is the constructional stretch of a 500 ft. fiber core, 8
strand rope rated at 3/4% (.0075) of rope stretch per 100 foot?
- correct answer - 3.75 ft. [ (100 X .0075)5 ]
7. When occupiable space is below the pit, what additional
equiment is required on the counterwieght? - correct answer -
Safeties
8. Of the types of rope listed, which one has wires preshaped to
fit the twist in the strands and has strands preshaped to fit the
twist in the rope? - correct answer - Preformed
9. If a hoist machine roped 1:1 is capable of running at 650 fpm,
with a capacity of 4500lbs, what would its capability be if roped
2:1? - correct answer - 325 fpm at 9000lbs
10. What functions can loadweighing transducers performs? -
correct answer - Adjust door times, bypass hall calls, and
adjust motor control
