Click here- Nclex - Stuvia US
CSX Conductor Training Week 1 Test Revie Complete
Questions and Correct Detailed Answers (Verified Answers)w
Who is Responsible for making Pay Claims?
Ans: Ranking Employee or Employee to be paid
What is the Hand Signal for Reduce Speed?
Ans: Arm out horizontal over the track
Which of the following are allowed by the Rulebook?
Ans: Always take the safe course
What is the Hand Signal for Release Air Brakes?
Ans: Hand held overhead when Equipment is Standing
Who authorizes a Utility Employee to join an Assigned Crew?
Ans: Ranking Employee
What is the normal position for a switch or derail?
Ans: In the "on" or derailing position
Before lining a switch or derail, an employee must?
pg. 1
, Click here- Nclex - Stuvia US
Ans: 1) Ensure that any preceeding movement has passed clearance points. 2)
Ensure that the device is not locked, spiked, or tagged "out of service"
If a lock is found to be defective or missing on a main line switch or derail an
employee must?
Ans: 1) Report device to Trainmaster/Dispatcher. 2) Be governed by the instructions
of said Dispatcher/Trainmaster
When an Employee determines that a switch or derail is defective, the employee
must?
Ans: 1) Not operate the device. 2) Report device to Proper Authority
You are standing in a yard using multiple switches on long shoves. After lining each
switch an employee should check what?
Ans: That all switch points are flush and aligned properly.
When using a portable radio in a shove move, Employee instructions must specify
what?
Ans: 1) Employee is clear of all tracks. 2) Switches and Derails are all properly aligned
for the move
What is a System of Tracks, other than main tracks and sidings, used for making up
trains for storing cars and other purposes?
pg. 2
, Click here- Nclex - Stuvia US
Ans: Yard
By Definition, what is the location in a turnout where it is unsafe to pass on an
adjacent track?
Ans: Clearance Point
What is a track connection between two adjacent tracks, not necessarily parallel,
consisting of two switches whose primary purpose is to allow crossing from one track
to another?
Ans: Crossover
What is a device of "Necessary Track" used to change from one track to another?
Ans: Switch
What is the the minimum distance you must stand from a switch or derail involved
in the route of a passing train?
Ans: 30'
When crossing tracks with standing equipment, what safety precautions must be
taken?
pg. 3
CSX Conductor Training Week 1 Test Revie Complete
Questions and Correct Detailed Answers (Verified Answers)w
Who is Responsible for making Pay Claims?
Ans: Ranking Employee or Employee to be paid
What is the Hand Signal for Reduce Speed?
Ans: Arm out horizontal over the track
Which of the following are allowed by the Rulebook?
Ans: Always take the safe course
What is the Hand Signal for Release Air Brakes?
Ans: Hand held overhead when Equipment is Standing
Who authorizes a Utility Employee to join an Assigned Crew?
Ans: Ranking Employee
What is the normal position for a switch or derail?
Ans: In the "on" or derailing position
Before lining a switch or derail, an employee must?
pg. 1
, Click here- Nclex - Stuvia US
Ans: 1) Ensure that any preceeding movement has passed clearance points. 2)
Ensure that the device is not locked, spiked, or tagged "out of service"
If a lock is found to be defective or missing on a main line switch or derail an
employee must?
Ans: 1) Report device to Trainmaster/Dispatcher. 2) Be governed by the instructions
of said Dispatcher/Trainmaster
When an Employee determines that a switch or derail is defective, the employee
must?
Ans: 1) Not operate the device. 2) Report device to Proper Authority
You are standing in a yard using multiple switches on long shoves. After lining each
switch an employee should check what?
Ans: That all switch points are flush and aligned properly.
When using a portable radio in a shove move, Employee instructions must specify
what?
Ans: 1) Employee is clear of all tracks. 2) Switches and Derails are all properly aligned
for the move
What is a System of Tracks, other than main tracks and sidings, used for making up
trains for storing cars and other purposes?
pg. 2
, Click here- Nclex - Stuvia US
Ans: Yard
By Definition, what is the location in a turnout where it is unsafe to pass on an
adjacent track?
Ans: Clearance Point
What is a track connection between two adjacent tracks, not necessarily parallel,
consisting of two switches whose primary purpose is to allow crossing from one track
to another?
Ans: Crossover
What is a device of "Necessary Track" used to change from one track to another?
Ans: Switch
What is the the minimum distance you must stand from a switch or derail involved
in the route of a passing train?
Ans: 30'
When crossing tracks with standing equipment, what safety precautions must be
taken?
pg. 3
