MGRADES
BCTC Industrial Maintenance Technology
AMTEC (NOCTI Mechatronic) Review
UPDATED ACTUAL Exam Questions and
CORRECT Answers
If you inhale phenolic fumes what would happen to you? - CORRECT ANSWER -
Trouble breathing
A _________ fire extinguisher should be used on an electrical fire. - CORRECT
ANSWER - Class C
What does OSHA stand for? - CORRECT ANSWER - Occupational Safety & Health
Administration
This type of drawing represents a three-dimensional object using several two-dimensional views
of the object. - CORRECT ANSWER - Orthographic
What are linear dimensions usually expressed in? - CORRECT ANSWER - Decimal or
Fractional Units
What does a filled triangle represent in a fluid power diagram? - CORRECT ANSWER -
Hydraulic Flow
What can happen if bolts and nuts are not properly torqued? - CORRECT ANSWER -
They wear out quickly and can cause failure.
What safety practice is used to prevent equipment from being energized? - CORRECT
ANSWER - Lockout/Tagout
,MGRADES
A Safety Data Sheet (SDS) provides information about first aid measures, stability and
reactivity, and _____? - CORRECT ANSWER - Handling and Storage
Which of the following is not true of a title block? - CORRECT ANSWER - Format is the
same from company to company.
A NFPA 70E is a regulation that provides guidelines and details for ___________? - CORRECT
ANSWER - Electrical safety
GFCI devices are used for what purpose? - CORRECT ANSWER - To prevent a person
from being electrocuted.
A person with serious electrical injury should be moved only when _______. - CORRECT
ANSWER - They are in immediate danger
What must be provided by chemical manufacturers, distributors, and importers to anyone who
will work with these potentially dangerous materials? - CORRECT ANSWER - Safety
Data Sheet (SDS).
You come across a fellow employee who is being electrocuted by becoming attached to a live
electrical circuit, what is the first thing you should do? - CORRECT ANSWER - Shut off
the circuit.
What would slippery floors and cluttered walkways be considered in the workplace? -
CORRECT ANSWER - Physical hazards.
What tool is used to measure the turning force when tightening a fastener? - CORRECT
ANSWER - Torque Wrench
When working on an electrical, fluid power, or mechanical system a ____ procedure should be
performed to lock out the energy. - CORRECT ANSWER - LOTO
, MGRADES
The section of a technical report which summarizes the report's contents is called what? -
CORRECT ANSWER - Abstract
What does a thick line represent in a schematic diagram? - CORRECT ANSWER -
Current flow
A switch is an example of a _____ into a motor control circuit. - CORRECT ANSWER -
input
How does the overload of a motor provide protection when current exceeds a predetermined
value? - CORRECT ANSWER - It opens a normally closed contact.
Overload protection is designed to protect the ______________ by disconnecting it from the
power source when an overload is sensed. - CORRECT ANSWER - Electric motor
Motors are normally protected from overload by a _______ device. - CORRECT
ANSWER - thermal
T/F: A two-wire control for a motor will restart automatically when power is restored after a
power failure. - CORRECT ANSWER - True
What is the most common machine wire type? - CORRECT ANSWER - THHN
T/F: A three-wire controlled motor will restart automatically after power is restored after a power
failure. - CORRECT ANSWER - False
Jogging is a type of motor control in which what happens? - CORRECT ANSWER - The
motors rotation is moved (bumped) slightly.
BCTC Industrial Maintenance Technology
AMTEC (NOCTI Mechatronic) Review
UPDATED ACTUAL Exam Questions and
CORRECT Answers
If you inhale phenolic fumes what would happen to you? - CORRECT ANSWER -
Trouble breathing
A _________ fire extinguisher should be used on an electrical fire. - CORRECT
ANSWER - Class C
What does OSHA stand for? - CORRECT ANSWER - Occupational Safety & Health
Administration
This type of drawing represents a three-dimensional object using several two-dimensional views
of the object. - CORRECT ANSWER - Orthographic
What are linear dimensions usually expressed in? - CORRECT ANSWER - Decimal or
Fractional Units
What does a filled triangle represent in a fluid power diagram? - CORRECT ANSWER -
Hydraulic Flow
What can happen if bolts and nuts are not properly torqued? - CORRECT ANSWER -
They wear out quickly and can cause failure.
What safety practice is used to prevent equipment from being energized? - CORRECT
ANSWER - Lockout/Tagout
,MGRADES
A Safety Data Sheet (SDS) provides information about first aid measures, stability and
reactivity, and _____? - CORRECT ANSWER - Handling and Storage
Which of the following is not true of a title block? - CORRECT ANSWER - Format is the
same from company to company.
A NFPA 70E is a regulation that provides guidelines and details for ___________? - CORRECT
ANSWER - Electrical safety
GFCI devices are used for what purpose? - CORRECT ANSWER - To prevent a person
from being electrocuted.
A person with serious electrical injury should be moved only when _______. - CORRECT
ANSWER - They are in immediate danger
What must be provided by chemical manufacturers, distributors, and importers to anyone who
will work with these potentially dangerous materials? - CORRECT ANSWER - Safety
Data Sheet (SDS).
You come across a fellow employee who is being electrocuted by becoming attached to a live
electrical circuit, what is the first thing you should do? - CORRECT ANSWER - Shut off
the circuit.
What would slippery floors and cluttered walkways be considered in the workplace? -
CORRECT ANSWER - Physical hazards.
What tool is used to measure the turning force when tightening a fastener? - CORRECT
ANSWER - Torque Wrench
When working on an electrical, fluid power, or mechanical system a ____ procedure should be
performed to lock out the energy. - CORRECT ANSWER - LOTO
, MGRADES
The section of a technical report which summarizes the report's contents is called what? -
CORRECT ANSWER - Abstract
What does a thick line represent in a schematic diagram? - CORRECT ANSWER -
Current flow
A switch is an example of a _____ into a motor control circuit. - CORRECT ANSWER -
input
How does the overload of a motor provide protection when current exceeds a predetermined
value? - CORRECT ANSWER - It opens a normally closed contact.
Overload protection is designed to protect the ______________ by disconnecting it from the
power source when an overload is sensed. - CORRECT ANSWER - Electric motor
Motors are normally protected from overload by a _______ device. - CORRECT
ANSWER - thermal
T/F: A two-wire control for a motor will restart automatically when power is restored after a
power failure. - CORRECT ANSWER - True
What is the most common machine wire type? - CORRECT ANSWER - THHN
T/F: A three-wire controlled motor will restart automatically after power is restored after a power
failure. - CORRECT ANSWER - False
Jogging is a type of motor control in which what happens? - CORRECT ANSWER - The
motors rotation is moved (bumped) slightly.
