PROGRESSION :FIELD TECH IV-V CONVENTIONAL (NCTI)
EXPERT VERIFIED ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (100%
CORRECT ANSWERS) GUARANTEED PASS!!
NEWEST 2025/2026.
Which of the following is a function of hubs and repeaters? -
ANSWER-Provide for cable extension Repeat digital signals
Interconnect different cable types
What type of routing allows network administrators to specify
additional information sources for the routing table and
network model? - ANSWER-
Policy-based
Which of the following shows the IP address assigned to a PC
running Windows XP / 7? - ANSWER-IPconfig
Which of the following commands shows the path between
source and destination in a TCP/IP network? - ANSWER-Tracert
Which of the following confirms connectivity between hosts? -
ANSWER-Ping
,M8L1 What should you use to inspect the IP address of a
Windows operating system PC? - ANSWER-IPconfig
Which of the following troubleshooting tools tells you the
distance, in hops, to the destination computer? - ANSWER-
Tracert
You need to reconfigure a Linux server to change the address
of its default gateway. What tool should you use? - ANSWER-
IFconfig
Tracert uses which of the following commands and IP fields to
carry out its operation? - ANSWER-Ping and TTL
Which of the following troubleshooting tools is not part of a
standard TCP/IP implementation? - ANSWER-Event Viewer
Which two TCP/IP tools can you use to force a workstation to
renew its DHCP lease? (Choose two.) - ANSWER-Winipcfg
IPconfig
What is the first step in troubleshooting a network? - ANSWER-
Establish the symptoms
,What is the most important troubleshooting question? -
ANSWER-What has changed?
You suspect that a crossover cable has been installed instead
of a patch cable. What can you use to identify the cable?
(Choose two.) - ANSWER-Media tester/certifier
Visual inspection of both connectors
Which of the following is a Microsoft Windows utility that
displays a computer's IP addressing and connectivity settings?
- ANSWER-Ipconfig
Which MS-DOS command-line utility is the quickest and easiest
way to evaluate whether a computer is up and running, and
attached to a TCP/IP network? - ANSWER-Ping
After entering "arp" into the MS-DOS command line, which of
the following switches would display the ARP cache? -
ANSWER--a or -g
What is the second step when troubleshooting a network? -
ANSWER-Identify the affected area
Scenario: As you are connecting the office computers, you use
one patch cord to connect each patch panel port to a hub port,
, and another patch cord to connect each work area port to a PC.
You power up all the PCs and look at the hub port status
indicators. All but one port shows green. What is the first
troubleshooting step you should take? - ANSWER-Establish the
symptoms
Scenario: You have finally identified the affected area and, as
you proceed to the next step, you realize that since this is a
new installation, there is no previous time that is known when
everything worked. The installation itself is the
only "change" and the third troubleshooting step. What step is
next? - ANSWER-Select the most probable cause
What voice issue is a normal occurrence on the PSTN and other
voice
networks, and occurs as a result of network delay and the two-
to four-wire conversion process? - ANSWER-Echo
Which protocol has a header of 5 bytes and a trailer of 3 bytes?
– ANSWER-Point-to-Point Protocol
What Protocol Independent Multicast (PIM) is designed to
support large, densely populated multicast groups? - ANSWER-
Dense Mode (DM)
EXPERT VERIFIED ACTUAL COMPLETE REAL EXAM
QUESTIONS AND CORRECT ANSWERS (100%
CORRECT ANSWERS) GUARANTEED PASS!!
NEWEST 2025/2026.
Which of the following is a function of hubs and repeaters? -
ANSWER-Provide for cable extension Repeat digital signals
Interconnect different cable types
What type of routing allows network administrators to specify
additional information sources for the routing table and
network model? - ANSWER-
Policy-based
Which of the following shows the IP address assigned to a PC
running Windows XP / 7? - ANSWER-IPconfig
Which of the following commands shows the path between
source and destination in a TCP/IP network? - ANSWER-Tracert
Which of the following confirms connectivity between hosts? -
ANSWER-Ping
,M8L1 What should you use to inspect the IP address of a
Windows operating system PC? - ANSWER-IPconfig
Which of the following troubleshooting tools tells you the
distance, in hops, to the destination computer? - ANSWER-
Tracert
You need to reconfigure a Linux server to change the address
of its default gateway. What tool should you use? - ANSWER-
IFconfig
Tracert uses which of the following commands and IP fields to
carry out its operation? - ANSWER-Ping and TTL
Which of the following troubleshooting tools is not part of a
standard TCP/IP implementation? - ANSWER-Event Viewer
Which two TCP/IP tools can you use to force a workstation to
renew its DHCP lease? (Choose two.) - ANSWER-Winipcfg
IPconfig
What is the first step in troubleshooting a network? - ANSWER-
Establish the symptoms
,What is the most important troubleshooting question? -
ANSWER-What has changed?
You suspect that a crossover cable has been installed instead
of a patch cable. What can you use to identify the cable?
(Choose two.) - ANSWER-Media tester/certifier
Visual inspection of both connectors
Which of the following is a Microsoft Windows utility that
displays a computer's IP addressing and connectivity settings?
- ANSWER-Ipconfig
Which MS-DOS command-line utility is the quickest and easiest
way to evaluate whether a computer is up and running, and
attached to a TCP/IP network? - ANSWER-Ping
After entering "arp" into the MS-DOS command line, which of
the following switches would display the ARP cache? -
ANSWER--a or -g
What is the second step when troubleshooting a network? -
ANSWER-Identify the affected area
Scenario: As you are connecting the office computers, you use
one patch cord to connect each patch panel port to a hub port,
, and another patch cord to connect each work area port to a PC.
You power up all the PCs and look at the hub port status
indicators. All but one port shows green. What is the first
troubleshooting step you should take? - ANSWER-Establish the
symptoms
Scenario: You have finally identified the affected area and, as
you proceed to the next step, you realize that since this is a
new installation, there is no previous time that is known when
everything worked. The installation itself is the
only "change" and the third troubleshooting step. What step is
next? - ANSWER-Select the most probable cause
What voice issue is a normal occurrence on the PSTN and other
voice
networks, and occurs as a result of network delay and the two-
to four-wire conversion process? - ANSWER-Echo
Which protocol has a header of 5 bytes and a trailer of 3 bytes?
– ANSWER-Point-to-Point Protocol
What Protocol Independent Multicast (PIM) is designed to
support large, densely populated multicast groups? - ANSWER-
Dense Mode (DM)
