CFT MONITOR CERTIFICATION EXAM 2024/2025 ACTUAL EXAM
COMPLETE 100+ QUESTIONS WITH DETAILED ANSWERS (100%
CORRECT ANSWERS) / ALREADY GRADED A+
1.As a CFT monitor, you must assist in the risk management(RM) process for the CFT. Which of
the following describes the RM process steps? - answer Identifying hazards, assessing risks,
determining which risks are most important, implementing controls, and supervising the
participants
2.The CFT monitor is responsible for setting up the events, scoring accurately, using proper
equipment, and __________ - answer ensuring participants wear the proper uniform
3.Which of the following are tasks performed by the CFT monitor during an actual CFT? - answer
Ensuring proper technique, calling out repetitions.
4.Location choices for the movement to contact event include outdoor or indoor venue. What
are the minimum location requirements you will need to meet? - answer Reasonable level, few
to no obstacles
5.During the maneuver to contact event when may Marines remove uniform blouses? - answer
With the commander's authorization
6.As a CFT monitor, you have setup the movement to contact event on an out-and-back route.
The start and finish lines are the same. What is the minimum number of monitors required for
this route? - answer 3
7.The participant's goal during the movement to contact event is to _______ - answer finish as
quickly as possible
, 8.SSgt Winifred Carter a 28-year-old female, ran the movement to contact event in 3:18. What is
her score for the movement to contact event? - answer 95
9.What are the equipment requirements for ammunition cans used in the ammunition lift
event? - answer The contents should not move excessively when lifted, grip tape applied to the
can sides, and use M2A1 5.56mm cans only.
10.Which of the following are common injuries associated with the ammunition lift event? -
answer Chipped teeth, black eyes, and broken noses.
11.Which location would be best suited for the ammunition lift event of the CFT? - answer
Open, flat, outdoor area
12.To mitigate injury risk, paired Marines are positioned during the ammunition lift event using
which arrangement? - answer The counting Marine stands to the side at 90 degrees of the lifting
Marine
13.Which of the following are the responsibilities and duties of the CFT Monitor? - answer
Selecting the CFT locations, Setting up events correctly, Accurately scoring events and recording
results, Mitigating the risk of injury.
14.Which of the following task would a monitor perform during an actual Combat Fitness Test? -
answer Call out time, Ensure proper technique.
15.Which of the following are monitor responsibilities? - answer Set up the field correctly,
Instruct Marines to perform this event safely,Evaluate Marines' performance accurately.
16.What equipment is required for the MTC event? - answer Stopwatch, measuring wheel,
Flags, cones or other viable markers, reflective belt, when course is on a roadway
COMPLETE 100+ QUESTIONS WITH DETAILED ANSWERS (100%
CORRECT ANSWERS) / ALREADY GRADED A+
1.As a CFT monitor, you must assist in the risk management(RM) process for the CFT. Which of
the following describes the RM process steps? - answer Identifying hazards, assessing risks,
determining which risks are most important, implementing controls, and supervising the
participants
2.The CFT monitor is responsible for setting up the events, scoring accurately, using proper
equipment, and __________ - answer ensuring participants wear the proper uniform
3.Which of the following are tasks performed by the CFT monitor during an actual CFT? - answer
Ensuring proper technique, calling out repetitions.
4.Location choices for the movement to contact event include outdoor or indoor venue. What
are the minimum location requirements you will need to meet? - answer Reasonable level, few
to no obstacles
5.During the maneuver to contact event when may Marines remove uniform blouses? - answer
With the commander's authorization
6.As a CFT monitor, you have setup the movement to contact event on an out-and-back route.
The start and finish lines are the same. What is the minimum number of monitors required for
this route? - answer 3
7.The participant's goal during the movement to contact event is to _______ - answer finish as
quickly as possible
, 8.SSgt Winifred Carter a 28-year-old female, ran the movement to contact event in 3:18. What is
her score for the movement to contact event? - answer 95
9.What are the equipment requirements for ammunition cans used in the ammunition lift
event? - answer The contents should not move excessively when lifted, grip tape applied to the
can sides, and use M2A1 5.56mm cans only.
10.Which of the following are common injuries associated with the ammunition lift event? -
answer Chipped teeth, black eyes, and broken noses.
11.Which location would be best suited for the ammunition lift event of the CFT? - answer
Open, flat, outdoor area
12.To mitigate injury risk, paired Marines are positioned during the ammunition lift event using
which arrangement? - answer The counting Marine stands to the side at 90 degrees of the lifting
Marine
13.Which of the following are the responsibilities and duties of the CFT Monitor? - answer
Selecting the CFT locations, Setting up events correctly, Accurately scoring events and recording
results, Mitigating the risk of injury.
14.Which of the following task would a monitor perform during an actual Combat Fitness Test? -
answer Call out time, Ensure proper technique.
15.Which of the following are monitor responsibilities? - answer Set up the field correctly,
Instruct Marines to perform this event safely,Evaluate Marines' performance accurately.
16.What equipment is required for the MTC event? - answer Stopwatch, measuring wheel,
Flags, cones or other viable markers, reflective belt, when course is on a roadway
