Revit Certification 50+ Actual Final Exam Questions With
Reviewed 100% Correct Detailed Answers Guaranteed Pass!!
1. Which part of the user interface Option bar
changes according to the command
you are using?
2. Which of the following is an example of Modeling a large project using voids to create the
subtractive modeling? desired shape
3. T or F: When using roof by face, you True
give up the option to input a manual
base offset
4. When placing sun location in revit you Use real world location using a project specific
should always do the following address and relevant settings
5. What tool allows you to change the wall Type selector
type from generic 8" to brick on metal
studs?
6. T or F: you must make wall openings False
before you can place a window or door
7. How are stacked walls commonly When a concrete block or cast I place concrete
used? wall is used as base material and a framed wall is
intended to sit above it.
8. T or F: curtain walls can be embedded False
into plastic wall types.
9. Which of the following methods makes Select the wall and use attach top/base
a wall touch and follow the shape of the
underside of a roof?
10. To create a flat roof which of the follow- Roof by footprint with the thickness set by the roof
ing commands would you use to sketch type.
1/6
, Revit Certification 50+ Actual Final Exam Questions With
Reviewed 100% Correct Detailed Answers Guaranteed Pass!!
the boundary of the roof and to set its
thickness?
11. T or F: when drawing a roof by footprint False
in plan view, all lines must define slope.
12. T or F: stairs are automatically drawn False
in revit: all you need to do is set the
base and top constraints and select the
appropriate stair family
13. T or F: stairs must have an associated True
bottom level by may or may not have
have an associated top level
14. T or F: openings in revit should always False
be placed using the by face tool
15. The purpose of call outs is to create Enlarged plan view of the model, plan, elevation,
or section.
16. Which is not a type of revit column Commercial
17. When creating a floor the boundary Closed with no intersecting and no overlapping
sketch must be lines.
18. T or F: ceilings in revit must be placed False
in rooms
19. Which dialogue box allows you to over- Visibility and graphics overrides
ride project object styles on a view by
view basis
20. Type selector
2/6
Reviewed 100% Correct Detailed Answers Guaranteed Pass!!
1. Which part of the user interface Option bar
changes according to the command
you are using?
2. Which of the following is an example of Modeling a large project using voids to create the
subtractive modeling? desired shape
3. T or F: When using roof by face, you True
give up the option to input a manual
base offset
4. When placing sun location in revit you Use real world location using a project specific
should always do the following address and relevant settings
5. What tool allows you to change the wall Type selector
type from generic 8" to brick on metal
studs?
6. T or F: you must make wall openings False
before you can place a window or door
7. How are stacked walls commonly When a concrete block or cast I place concrete
used? wall is used as base material and a framed wall is
intended to sit above it.
8. T or F: curtain walls can be embedded False
into plastic wall types.
9. Which of the following methods makes Select the wall and use attach top/base
a wall touch and follow the shape of the
underside of a roof?
10. To create a flat roof which of the follow- Roof by footprint with the thickness set by the roof
ing commands would you use to sketch type.
1/6
, Revit Certification 50+ Actual Final Exam Questions With
Reviewed 100% Correct Detailed Answers Guaranteed Pass!!
the boundary of the roof and to set its
thickness?
11. T or F: when drawing a roof by footprint False
in plan view, all lines must define slope.
12. T or F: stairs are automatically drawn False
in revit: all you need to do is set the
base and top constraints and select the
appropriate stair family
13. T or F: stairs must have an associated True
bottom level by may or may not have
have an associated top level
14. T or F: openings in revit should always False
be placed using the by face tool
15. The purpose of call outs is to create Enlarged plan view of the model, plan, elevation,
or section.
16. Which is not a type of revit column Commercial
17. When creating a floor the boundary Closed with no intersecting and no overlapping
sketch must be lines.
18. T or F: ceilings in revit must be placed False
in rooms
19. Which dialogue box allows you to over- Visibility and graphics overrides
ride project object styles on a view by
view basis
20. Type selector
2/6
