1 promax - Stuvia US 2025/2026
Outdoor power equipment Questions with Detailed
Verified Answers (100% Correct Answers) /Already
Graded A+
Thread
Ans: An inclined plane that circles a bolt or hole
Tapping
Ans: The process by which you cut threads in a hole
An unthreaded hole that a bolt or screw passes through should have a
small amount of _________.
Exampromax - Stuvia US
Ans: Clearance
Approved By:
Shank
Ans: The unthreaded portion of a bolt
A wider bearing surface can be provided by adding a ____________ under
the head.
Ans: Flat Washer
When axial clearance is required, such as with some bearings on shafts, a
___________ nut and a cotton pin should be used.
Ans: Castellated
A ____ nut can be used when a part is subjected to continuous vibration
that might loosen the nut.
Ans: Lock
Bolt grades relate to the minimum _______________ of the bolt
Outdoor power equipment Questions with Detailed
Verified Answers (100% Correct Answers) /Already
Graded A+
Thread
Ans: An inclined plane that circles a bolt or hole
Tapping
Ans: The process by which you cut threads in a hole
An unthreaded hole that a bolt or screw passes through should have a
small amount of _________.
Exampromax - Stuvia US
Ans: Clearance
Approved By:
Shank
Ans: The unthreaded portion of a bolt
A wider bearing surface can be provided by adding a ____________ under
the head.
Ans: Flat Washer
When axial clearance is required, such as with some bearings on shafts, a
___________ nut and a cotton pin should be used.
Ans: Castellated
A ____ nut can be used when a part is subjected to continuous vibration
that might loosen the nut.
Ans: Lock
Bolt grades relate to the minimum _______________ of the bolt
