1 promax - Stuvia US 2025/2026
Certified Playground Safety Inspector CPSI Sample Exam
Questions with Detailed Verified Answers (100% Correct
Answers) /Already Graded A+
To be compliant with ASTM 1487, a designer or manufacturer of
playground equipment should
Ans: provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard
exists on
Ans: a partially bounded opening
Exampromax - Stuvia US
3. Which of the following is correct regarding the impact-attenuation of
Approved By:
surfacing material
Ans: Critical height must equal or exceed fall height
4. When evaluating the structural integrity of a support structure for a
swing that appears to be failing, a CPSI should
Ans: hire a licensed professional engineer to certify the integrity of the
equipment
5. Manufacturers of playground equipment must: provide the
manufacturer's identification of the equipment
Ans:
6. The majority of injuries associated with playground equipment result
from
Ans: falls to the surface on which the equipment was located
7. An opening may present a common crush or shear hazard only if it
, 2 promax - Stuvia US 2025/2026
Ans: grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting requirements
of
Ans: ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following is correct
Ans: Signage may not prevent accidents but may reduce liability
10. Which of the following factors is MOST important when determining
the frequency of inspections of surfacing
Exampromax - Stuvia US
Ans: Type of surfacing and amount of use
Approved By:
11. When planning a playground for public use, the play equipment that is
chosen must
Ans: be appropriate for the age of intended users
12. A spring rocker with seat height of 26" is about to be installed adjacent
to the side of a fully enclosed bucket swing set. The minimum distance
required between the swing set and the rocker is
Ans: 108" or 9'
13. The Site History File for a playground should contains
Ans: a comprehensive inventory of all equipment, a parts list, maintenance,
and inspection recommendations
14. What is the minimum use zone between a stand-alone climber and a
standing-rocking/springing playground piece
Ans: 156" or 13'
Certified Playground Safety Inspector CPSI Sample Exam
Questions with Detailed Verified Answers (100% Correct
Answers) /Already Graded A+
To be compliant with ASTM 1487, a designer or manufacturer of
playground equipment should
Ans: provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard
exists on
Ans: a partially bounded opening
Exampromax - Stuvia US
3. Which of the following is correct regarding the impact-attenuation of
Approved By:
surfacing material
Ans: Critical height must equal or exceed fall height
4. When evaluating the structural integrity of a support structure for a
swing that appears to be failing, a CPSI should
Ans: hire a licensed professional engineer to certify the integrity of the
equipment
5. Manufacturers of playground equipment must: provide the
manufacturer's identification of the equipment
Ans:
6. The majority of injuries associated with playground equipment result
from
Ans: falls to the surface on which the equipment was located
7. An opening may present a common crush or shear hazard only if it
, 2 promax - Stuvia US 2025/2026
Ans: grabs the 5/8" (16mm) dowel
8. The criteria for unitary surface materials includes meeting requirements
of
Ans: ASTM F1292 and F1487
9. Regarding playground safety signage, which of the following is correct
Ans: Signage may not prevent accidents but may reduce liability
10. Which of the following factors is MOST important when determining
the frequency of inspections of surfacing
Exampromax - Stuvia US
Ans: Type of surfacing and amount of use
Approved By:
11. When planning a playground for public use, the play equipment that is
chosen must
Ans: be appropriate for the age of intended users
12. A spring rocker with seat height of 26" is about to be installed adjacent
to the side of a fully enclosed bucket swing set. The minimum distance
required between the swing set and the rocker is
Ans: 108" or 9'
13. The Site History File for a playground should contains
Ans: a comprehensive inventory of all equipment, a parts list, maintenance,
and inspection recommendations
14. What is the minimum use zone between a stand-alone climber and a
standing-rocking/springing playground piece
Ans: 156" or 13'
