VA HIC License Exam Prep Questions with Detailed Verified Answers (100% Correct Answers) /Already Graded A+

1



VA HIC License Exam Prep Questions with Detailed Verified
Answers (100% Correct Answers) /Already Graded A+
Protruding objects may not protrude more than ___ inches into the path of
travel.
Ans: 4"


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 15

In new buildings, thresholds at doorways should be no higher than ______.
Ans: 1/2"


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 30

In a Type A unit, if measuring to the highest part of the rim or highest part of
the counter, what is the maximum height of the sink front above the floor?
Ans: 34"


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 149

The height of handrails shall be ____ minimum and ____ maximum vertically
above stair nosings, ramp and walking surfaces.
Ans: 34" minimum, 38" maximum


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 62

A hallway more than 24 inches long must have a clear width of ____.

Approved By:
vPretest - Stuvia US

,2

Ans: 36"


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 19

Enter and proceed" is presented as a _____ on the raised touchable surface
on a function key."
Ans: Circle


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 107

Operable parts shall be operable with one hand and shall not require:
Ans: Tight grasping, pinching, or twisting of the wrist.


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 18

In existing buildings and facilities, the clear width of a walking surface shall be
permitted to be reduced to ____ minimum for a length of 24 inches maximum.
Ans: 32 inches


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 19

The clear width of an exterior accessible route located within seating areas
shall be ___ minimum.




Approved By:
vPretest - Stuvia US

,3

Ans: 36 inches


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 19

The running slope of walking surfaces shall not be steeper than:
Ans: 1:20


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 19

What components shall not be part of an accessible route?
Ans: Revolving doors & Turnstiles


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 19

The maximum height of existing elevator call buttons shall be permitted to be
located ___ above the floor.
Ans: 54"


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 40

The maximum knee clearance shall be permitted to extend ____ under an
element that is 9" above the floor.




Approved By:
vPretest - Stuvia US

, 4

Ans: 25"


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 13

The brightness of the elevator car landing sill, threshold, platform and controls
are to be no less than _____ foot candles.
Ans: 5


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 51

What is the least diameter of grab bars with circular cross sections?
Ans: 1-1/4"


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 87

All hardware such as handles, locks, or any other operable parts shall be ____
minimum above the floor.
Ans: 34"


ANSI Accessible and Usable Buildings and Facilities, 2017
Page 32

In new construction, what is the maximum slope of a ramp?




Approved By:
vPretest - Stuvia US