Smog Level 1 Practice Test
A customer's vehicle failed a smog inspection (excessive emissions) at a take a look at best
station. The patron had the vehicle repaired at a non-certified repair facility at a value of
$487. An "after upkeep" smog inspection become accomplished, and the automobile
nevertheless failed for excessive emissions. Does the car qualify for a $450 cost waiver? -
ANSno because the repairs weren't executed with the aid of an authorized station and
technician
A consumer has left his automobile in front of your smog save earlier than enterprise hours
with a notice bearing his/her call and call wide variety, and a request for a smog inspection.
Do you want further authorization for repairs before appearing the inspection? - ANSagree
and discuss expenses is important. Want dmv registration shape and create RO
A smog check technician is repairing a failing vehicle with the aid of changing components
and using diagnostic techniques that have labored on similar emissions failures on different
motors. This diagnostic method is not primarily based on diagnostic techniques from that
unique producer or recognized enterprise exchange requirements. Is this individual following
rules? - ANSno, technician should use manufacturers trying out processes for unique
automobiles
A technician goes to behavior the visual inspection part of the smog test inspection. Upon
opening the hood he/she notices the car has no underhood label gift. What motion have to
the technician take as a result of this finding? - ANSUse the ECS guide or BAR permitted
referee cloth to decide the emissions additives for this automobile
A take a look at and repair station doesn't have the ideal gear/device to repair a specific car
they're about to inspect. What duty, if any, does the station have closer to the purchaser prior
to acting the smog inspection? - ANSinform the consumer on writing and verbally that if the
vehicle fails, the station would not have the device to repair the vehicle
A vacuum hose has been re-routed bypassing a TVS (thermal vacuum switch) valve, and is
attached without delay to the consumption manifold vacuum. How ought to this be entered
into the BAR 97 EIS underneath visible inspection? - ANSmodified
A vacuum hose to the EGR valve is connected efficiently but is cut up in the center due to
age. How need to this be entered into the BAR ninety seven EIS beneath visual inspection. -
ANSdefective
A vehicle's ignition timing specification (in keeping with the underhood label) indicates timing
needs to be set at 12 levels BTDC at 750 rpm. The technician performs the ignition timing
practical take a look at and measures 15 levels BTDC at 750 rpm. Should this car bypass or
fail the purposeful ignition timing check? What is the BAR allowed timing variance? -
ANSBAR allows +/- three tiers and +/- 100 rpm to pass vehicle
, All of the subsequent are taken into consideration to be a part of "different emissions related"
visible inspection statistics entries, besides? - ANSintake air filters
All of the following vehicles are exempt from a smog inspection except? - ANSrotary
powered motors
All of the subsequent vehicles are exempt from a smog inspection except? - ANSvehicle title
is being transferred from business enterprise to employee
All or part of an emissions manage machine has been eliminated from the automobile. How
have to this be entered into the BAR 97 EIS under visual inspection? - ANSmissing
An add-on component which has no longer been authorised by way of the ARB or is an
OEM replacement component has been established. How ought to this be entered into the
BAR ninety seven EIS underneath visible inspection? - ANSmodified
An air injection device is gift but the belt is missing and there are no signs of tampering. How
should this be entered into the BAR ninety seven EIS beneath visual inspection? -
ANSdefective
An independent restore provider might also update a faulty emissions control component
that can be blanketed beneath warranty. True or False? - ANSTrue, but tell patron
approximately their guarantee's
An OEM emission control tool has been physically altered to a non-factory configuration, but
all devices and hoses are related. How need to this be entered into the BAR 97 EIS beneath
visible inspection? - ANSmodified
Are all required emission control structures identified on the underhood label? - ANSno, pcv
and evap wont be listed``
By which means that can the inspector affirm that the car has warmed as much as working
temperature? - ANSgauge on sprint, hear fanatics cycle, higher and lower radiator hoses are
hot
Can a registered Automotive Repair Dealer (ARD) agreement with a patron to perform smog
take a look at upkeep on motors that fail a smog check inspection with out being a certified
smog test take a look at and restore station? - ANSno
During a useful test of the OBD II gadget, what does the analyzer assess when it
interrogates the system? - ANSmonitor status, hassle codes, VIN, and software
During a smog inspection, inspectors should affirm that each one entries are whole and
correct. If an blunders is discovered after changes can no longer be made, what procedure
should the inspector observe? - ANSabort the test
A customer's vehicle failed a smog inspection (excessive emissions) at a take a look at best
station. The patron had the vehicle repaired at a non-certified repair facility at a value of
$487. An "after upkeep" smog inspection become accomplished, and the automobile
nevertheless failed for excessive emissions. Does the car qualify for a $450 cost waiver? -
ANSno because the repairs weren't executed with the aid of an authorized station and
technician
A consumer has left his automobile in front of your smog save earlier than enterprise hours
with a notice bearing his/her call and call wide variety, and a request for a smog inspection.
Do you want further authorization for repairs before appearing the inspection? - ANSagree
and discuss expenses is important. Want dmv registration shape and create RO
A smog check technician is repairing a failing vehicle with the aid of changing components
and using diagnostic techniques that have labored on similar emissions failures on different
motors. This diagnostic method is not primarily based on diagnostic techniques from that
unique producer or recognized enterprise exchange requirements. Is this individual following
rules? - ANSno, technician should use manufacturers trying out processes for unique
automobiles
A technician goes to behavior the visual inspection part of the smog test inspection. Upon
opening the hood he/she notices the car has no underhood label gift. What motion have to
the technician take as a result of this finding? - ANSUse the ECS guide or BAR permitted
referee cloth to decide the emissions additives for this automobile
A take a look at and repair station doesn't have the ideal gear/device to repair a specific car
they're about to inspect. What duty, if any, does the station have closer to the purchaser prior
to acting the smog inspection? - ANSinform the consumer on writing and verbally that if the
vehicle fails, the station would not have the device to repair the vehicle
A vacuum hose has been re-routed bypassing a TVS (thermal vacuum switch) valve, and is
attached without delay to the consumption manifold vacuum. How ought to this be entered
into the BAR 97 EIS underneath visible inspection? - ANSmodified
A vacuum hose to the EGR valve is connected efficiently but is cut up in the center due to
age. How need to this be entered into the BAR ninety seven EIS beneath visual inspection. -
ANSdefective
A vehicle's ignition timing specification (in keeping with the underhood label) indicates timing
needs to be set at 12 levels BTDC at 750 rpm. The technician performs the ignition timing
practical take a look at and measures 15 levels BTDC at 750 rpm. Should this car bypass or
fail the purposeful ignition timing check? What is the BAR allowed timing variance? -
ANSBAR allows +/- three tiers and +/- 100 rpm to pass vehicle
, All of the subsequent are taken into consideration to be a part of "different emissions related"
visible inspection statistics entries, besides? - ANSintake air filters
All of the following vehicles are exempt from a smog inspection except? - ANSrotary
powered motors
All of the subsequent vehicles are exempt from a smog inspection except? - ANSvehicle title
is being transferred from business enterprise to employee
All or part of an emissions manage machine has been eliminated from the automobile. How
have to this be entered into the BAR 97 EIS under visual inspection? - ANSmissing
An add-on component which has no longer been authorised by way of the ARB or is an
OEM replacement component has been established. How ought to this be entered into the
BAR ninety seven EIS underneath visible inspection? - ANSmodified
An air injection device is gift but the belt is missing and there are no signs of tampering. How
should this be entered into the BAR ninety seven EIS beneath visual inspection? -
ANSdefective
An independent restore provider might also update a faulty emissions control component
that can be blanketed beneath warranty. True or False? - ANSTrue, but tell patron
approximately their guarantee's
An OEM emission control tool has been physically altered to a non-factory configuration, but
all devices and hoses are related. How need to this be entered into the BAR 97 EIS beneath
visible inspection? - ANSmodified
Are all required emission control structures identified on the underhood label? - ANSno, pcv
and evap wont be listed``
By which means that can the inspector affirm that the car has warmed as much as working
temperature? - ANSgauge on sprint, hear fanatics cycle, higher and lower radiator hoses are
hot
Can a registered Automotive Repair Dealer (ARD) agreement with a patron to perform smog
take a look at upkeep on motors that fail a smog check inspection with out being a certified
smog test take a look at and restore station? - ANSno
During a useful test of the OBD II gadget, what does the analyzer assess when it
interrogates the system? - ANSmonitor status, hassle codes, VIN, and software
During a smog inspection, inspectors should affirm that each one entries are whole and
correct. If an blunders is discovered after changes can no longer be made, what procedure
should the inspector observe? - ANSabort the test
