©THEBRIGHT 2025 ALL RIGHTS RESERVED 11:12 AM A+
NCCCO Telescopic Boom Crane- Swing
Cab(TLL) Exam Questions And Answers
|Latest 2025 | Guaranteed Pass
A crane is operating with a long boom, on outriggers, on uneven ground. Under these
conditions it is important to - Answer✔Block under the float or pad to achieve a 90 degree
angle between the cylinder rod and the float or pad
What is the purpose of a boom length indicator? - Answer✔Indicates the extended length of
boom
According to OSHA 1926 subpart cc, floats/pads must be fastened to the outrigger/stabilizers
when - Answer✔They are in use
A crane's jib is offset 15 degrees versus it's original 0 degree offset and the boom angle remains
unchanged, the load radius will - Answer✔Increase
When leaving telescopic boom cranes unattended overnight or for longer periods, the boom
should be - Answer✔Fully retracted and stowed
On a telescopic boom truck crane that has all 5 outriggers properly positioned, the working area
diagram will indicate the "over front" area is - Answer✔Determined by the crane manufacturer
According to OSHA 1926 subpart cc, who determines if a crane can be used for pick and carry
operations? - Answer✔The manufacturer
1|Page
NCCCO Telescopic Boom Crane- Swing
Cab(TLL) Exam Questions And Answers
|Latest 2025 | Guaranteed Pass
A crane is operating with a long boom, on outriggers, on uneven ground. Under these
conditions it is important to - Answer✔Block under the float or pad to achieve a 90 degree
angle between the cylinder rod and the float or pad
What is the purpose of a boom length indicator? - Answer✔Indicates the extended length of
boom
According to OSHA 1926 subpart cc, floats/pads must be fastened to the outrigger/stabilizers
when - Answer✔They are in use
A crane's jib is offset 15 degrees versus it's original 0 degree offset and the boom angle remains
unchanged, the load radius will - Answer✔Increase
When leaving telescopic boom cranes unattended overnight or for longer periods, the boom
should be - Answer✔Fully retracted and stowed
On a telescopic boom truck crane that has all 5 outriggers properly positioned, the working area
diagram will indicate the "over front" area is - Answer✔Determined by the crane manufacturer
According to OSHA 1926 subpart cc, who determines if a crane can be used for pick and carry
operations? - Answer✔The manufacturer
1|Page
