Fire Apparatus Driver/Operator - Aerial -
Challenge Review
A Driver/Operator can also want to study manufacturer's working instructions, which is a
obligation that calls for: - ANS-Good studying comprehension
A ladder's base is high-quality described as - ANS-the bottom segment of the aerial ladder
A liquid surge effect may additionally arise: - ANS-When an aerial equipment's tank isn't always
completely full.
A relay operation is used when: - ANS-The water source is remote from the hearth incident
A Stokes clutter: - ANS-Can be used with aerial ladders or increased systems.
A turntable's feature is fine defined as: - ANS-Provides non-stop rotation on a horizontal aircraft
Aerial equipment driver/operator are regulated by: - ANS-All of the above
Aerial equipment driving force/operators ought to use gradual to mild operational speed in
extremely low temperature conditions to: - ANS-NOT D
An aerial apparatus motive force/operator is anticipated to: - ANS-Control the aerial equipment
whilst accelerating, decelerating, and turning
An aerial apparatus is maximum solid whilst the aerial device is operated - ANS-Directly over
the front or rear of the car
As aerial extensions will increase - ANS-Aerial loading ought to lower
Check the hydraulic and elevation/lifting cylinders for - ANS-Fluid leakage
During a tandem pumping operation ensure you do now not - ANS-exceed the rated stress of
the hose or pump
During an aerial equipment inspection, the lowest proper fuel gauge studying is: - ANS-at the
least 3/four full ?????
, During an operation inspection, rotate the aerial tool - ANS-While the device is extended or
completely retracted
During relay pumping operations, the intake stress remedy valves are used to: - ANS-Reduce
the potential for damage to the pump or hoselines
Following the engine speed check and vacuum check, to prepare the aerial apparatus for the
closing checks: - ANS-Make the pump operational
For all kinds of apparatus, step one while engaging the PTO is to: - ANS-Set the parking brake
For the responder, the maximum dangerous type of rescue deliver down an aerial ladder is the -
ANS-Over-the-shoulder convey
Hydraulic system in aerial apparatus are used to: - ANS-Stabilize the apparatus and increase
the aerial tool
Ice shrugging is quality defined as: - ANS-Slowly extending and retracting the aerial tool to put
off ice
Identify FOUR pre-service checks for aerial apparatus - ANS-Acceptance Tests
Certification Tests
Hydrostatic Tests
Road Tests
Identify FOUR skills proven for the duration of the alley dock workout: - ANS-Operating the
hearth apparatus adequately.
Moving the fire equipment backward within a restricted place.
Interpreting spotter signals
Using facet view mirrors
Identify the precise description of an aerial equipment's center of gravity - ANS-High
Identify the FIVE major capabilities or capabilities of quints - ANS-size of the fire pump.
Pre-piped waterway on the aerial apparatus
length of the water tank
Challenge Review
A Driver/Operator can also want to study manufacturer's working instructions, which is a
obligation that calls for: - ANS-Good studying comprehension
A ladder's base is high-quality described as - ANS-the bottom segment of the aerial ladder
A liquid surge effect may additionally arise: - ANS-When an aerial equipment's tank isn't always
completely full.
A relay operation is used when: - ANS-The water source is remote from the hearth incident
A Stokes clutter: - ANS-Can be used with aerial ladders or increased systems.
A turntable's feature is fine defined as: - ANS-Provides non-stop rotation on a horizontal aircraft
Aerial equipment driver/operator are regulated by: - ANS-All of the above
Aerial equipment driving force/operators ought to use gradual to mild operational speed in
extremely low temperature conditions to: - ANS-NOT D
An aerial apparatus motive force/operator is anticipated to: - ANS-Control the aerial equipment
whilst accelerating, decelerating, and turning
An aerial apparatus is maximum solid whilst the aerial device is operated - ANS-Directly over
the front or rear of the car
As aerial extensions will increase - ANS-Aerial loading ought to lower
Check the hydraulic and elevation/lifting cylinders for - ANS-Fluid leakage
During a tandem pumping operation ensure you do now not - ANS-exceed the rated stress of
the hose or pump
During an aerial equipment inspection, the lowest proper fuel gauge studying is: - ANS-at the
least 3/four full ?????
, During an operation inspection, rotate the aerial tool - ANS-While the device is extended or
completely retracted
During relay pumping operations, the intake stress remedy valves are used to: - ANS-Reduce
the potential for damage to the pump or hoselines
Following the engine speed check and vacuum check, to prepare the aerial apparatus for the
closing checks: - ANS-Make the pump operational
For all kinds of apparatus, step one while engaging the PTO is to: - ANS-Set the parking brake
For the responder, the maximum dangerous type of rescue deliver down an aerial ladder is the -
ANS-Over-the-shoulder convey
Hydraulic system in aerial apparatus are used to: - ANS-Stabilize the apparatus and increase
the aerial tool
Ice shrugging is quality defined as: - ANS-Slowly extending and retracting the aerial tool to put
off ice
Identify FOUR pre-service checks for aerial apparatus - ANS-Acceptance Tests
Certification Tests
Hydrostatic Tests
Road Tests
Identify FOUR skills proven for the duration of the alley dock workout: - ANS-Operating the
hearth apparatus adequately.
Moving the fire equipment backward within a restricted place.
Interpreting spotter signals
Using facet view mirrors
Identify the precise description of an aerial equipment's center of gravity - ANS-High
Identify the FIVE major capabilities or capabilities of quints - ANS-size of the fire pump.
Pre-piped waterway on the aerial apparatus
length of the water tank
