CWB Level 1 Functions of the Inspector
A Level 1 welding inspector must perform welding inspections according with an employer's
governing assignment announcement. (True/False) - ANS-False
A T class on a CWB Welder Qualification card way the welder is qualified in all different
class for all positions and welding methods. (True/False) - ANS-false
According to CSA W59, what should be performed if a bundle of low-hydrogen electrodes is
damaged? (Multiple preference)
Question 7 alternatives:A) The fabricator need to source a new provider.B) The electrodes
may be used as is.C) The electrodes are to be disposed.D) The electrodes can be
reconditioned. - ANS-C) The electrodes are to be disposed.
Take a look at this answer
All reviews produced by an inspector ought to be: (Multiple choice)
Question nine options:A) Neat, accurate, entire, and timely.B) Technical, complete, correct,
and encompass snap shots.C) Completed as quickly as fabrication has completed.D)
Delivered to the stop person upon final touch. - ANS-A) Neat, correct, entire, and timely.
An inspector is required if you want to study drawings and interpret weld symbols.
(True/False) - ANS-real
An inspector's responsibilities changes when fabrication begins. (True/False) - ANS-genuine
Any base metal that meets the necessities of CSA G40.21 ought to also meet the
necessities of: (Multiple choice)
Question 30 alternatives:A) ASME sec. IIB) CSA G40.20C) API 5LD) CSA W59 - ANS-B)
CSA G40.20
ASME Section VIII does not oversee the qualification of welding consumables. (True/False) -
ANS-True
ASME makes use of "F" numbers to categorise electrodes. An instance of an F-three
electrode is: (Multiple choice)
Question 31 options:A) E4311B) E5516C) E7618D) E4948 - ANS-B) E5516
Can a welder certified with an E4918 (F4) electrode weld use an E4313 (F2) electrode?
(Multiple desire)
Question eleven alternatives:A) No, welders are best certified for what was used at some
point of trying out.B) E4313 (F2) electrodes are not certifiable and need to now not be
used.C) Yes. F4 qualifies for the usage of F4, F3, F2, F1 electrodes.D) This is on the
discretion of the fabricator. - ANS-C) Yes. F4 qualifies for using F4, F3, F2, F1 electrodes.
Can a welder with a valid S classification welder qualification weld on hollow sections from
one aspect without backing? (Multiple preference)
Question 29 options:A) Yes.B) Only with the inspector's approval.C) No.D) Yes, if backing is
removed well. - ANS-C) No.
Contract documents often will exceed the minimum requirements diagnosed through the
code. (True/False) - ANS-True
Developing weld processes is the obligation of the inspector. (True/False) - ANS-false
During a warmness treatment operation, what is an inspector accountable to monitor?
(Multiple desire)
, Question 18 options:A) Time and temperature quotes and versions.B) Heat remedy operator
qualification.C) Type and length of furnace used.D) Type of heating software. - ANS-A) Time
and temperature rates and versions.
During put up-weld heat treatment, an inspector may be required to monitor certain items.
This ought to include: (Multiple preference)
Question 24 options:A) Heating and cooling fees.B) Minimum temperature distinction among
thermocouples.C) Calibrations of the torch assemblies used.D) Confirmation of mechanical
temperature consequences. - ANS-A) Heating and cooling charges.
During welding, what may additionally the inspector be referred to as upon to check?
(Multiple desire)
Question 19 alternatives:A) That the post weld warmth remedy has been completed.B) That
the welding parameters conform to the accepted methods.C) The of completion of the
inspection take a look at plan (ITP).D) That all weldments had been finished. - ANS-B) That
the welding parameters agree to the authorised tactics.
For ASME Section VIII stress vessel paintings, how would a welding inspector recognize that
electrodes meet the necessities? (Multiple desire)
Question 8 alternatives:A) They need to be certified to the CSA W48 collection.B) There isn't
any requirement for checking out electrodes.C) The inspector have to set up for checking out
of all electrodes.D) The appropriate ASME SFA specifications are said on the package label.
- ANS-D) The appropriate ASME SFA specifications are stated at the package label.
For ASME paintings, a WPS is needed. Which of the subsequent is NOT covered in a WPS?
(Multiple desire)
Question 17 alternatives:A) The base metallic.B) The welder's qualification.C) The welding
position.D) The submit-weld warmness remedy. - ANS-B) The welder's qualification.
For how long is an AWS welder qualification legitimate? (Multiple preference)
Question eight options:A) Two years.B) Five years.C) Indefinitely.D) Only for the duration of
challenge. - ANS-C) Indefinitely.
For the ASME, the WPS is the document that: (Multiple preference)
Question 16 options:A) offers direction for the execution of an acceptable weld.B) provides a
listing of perfect fabricators.C) states the requirements for structural production.D) states the
meeting commands for the numerous parts. - ANS-A) offers path for the execution of a
suitable weld.
How can an inspector confirm the temperature of the electrode preserving oven? (Multiple
desire)
Question 32 alternatives:A) By reading the heat putting at the oven.B) By reading the
temperature indicators on the electrodes.C) By the use of a temperature-indicating crayon.D)
Electrode oven temperatures do now not want to be established. - ANS-C) By using a
temperature-indicating crayon.
How might an inspector affirm a welder is qualified beneath CSA W47.1? (Multiple desire)
Question 28 options:A) The fabricator provides a listing of certified welders.B) Qualified
welders are issued an identity card.C) Welder qualification isn't always verifiable beneath the
terms of CSA W47.1.D) Welders are issued a "welder range" that may be used for
verification. - ANS-B) Qualified welders are issued an identity card.
In a non-conformance application, what coloration is used to indicate a product maintain?
(Multiple preference)
Question five alternatives:A) YellowB) RedC) GreenD) Blue - ANS-A) Yellow
In Canada, who regulates the construction of pressurized structures? (Multiple choice)
A Level 1 welding inspector must perform welding inspections according with an employer's
governing assignment announcement. (True/False) - ANS-False
A T class on a CWB Welder Qualification card way the welder is qualified in all different
class for all positions and welding methods. (True/False) - ANS-false
According to CSA W59, what should be performed if a bundle of low-hydrogen electrodes is
damaged? (Multiple preference)
Question 7 alternatives:A) The fabricator need to source a new provider.B) The electrodes
may be used as is.C) The electrodes are to be disposed.D) The electrodes can be
reconditioned. - ANS-C) The electrodes are to be disposed.
Take a look at this answer
All reviews produced by an inspector ought to be: (Multiple choice)
Question nine options:A) Neat, accurate, entire, and timely.B) Technical, complete, correct,
and encompass snap shots.C) Completed as quickly as fabrication has completed.D)
Delivered to the stop person upon final touch. - ANS-A) Neat, correct, entire, and timely.
An inspector is required if you want to study drawings and interpret weld symbols.
(True/False) - ANS-real
An inspector's responsibilities changes when fabrication begins. (True/False) - ANS-genuine
Any base metal that meets the necessities of CSA G40.21 ought to also meet the
necessities of: (Multiple choice)
Question 30 alternatives:A) ASME sec. IIB) CSA G40.20C) API 5LD) CSA W59 - ANS-B)
CSA G40.20
ASME Section VIII does not oversee the qualification of welding consumables. (True/False) -
ANS-True
ASME makes use of "F" numbers to categorise electrodes. An instance of an F-three
electrode is: (Multiple choice)
Question 31 options:A) E4311B) E5516C) E7618D) E4948 - ANS-B) E5516
Can a welder certified with an E4918 (F4) electrode weld use an E4313 (F2) electrode?
(Multiple desire)
Question eleven alternatives:A) No, welders are best certified for what was used at some
point of trying out.B) E4313 (F2) electrodes are not certifiable and need to now not be
used.C) Yes. F4 qualifies for the usage of F4, F3, F2, F1 electrodes.D) This is on the
discretion of the fabricator. - ANS-C) Yes. F4 qualifies for using F4, F3, F2, F1 electrodes.
Can a welder with a valid S classification welder qualification weld on hollow sections from
one aspect without backing? (Multiple preference)
Question 29 options:A) Yes.B) Only with the inspector's approval.C) No.D) Yes, if backing is
removed well. - ANS-C) No.
Contract documents often will exceed the minimum requirements diagnosed through the
code. (True/False) - ANS-True
Developing weld processes is the obligation of the inspector. (True/False) - ANS-false
During a warmness treatment operation, what is an inspector accountable to monitor?
(Multiple desire)
, Question 18 options:A) Time and temperature quotes and versions.B) Heat remedy operator
qualification.C) Type and length of furnace used.D) Type of heating software. - ANS-A) Time
and temperature rates and versions.
During put up-weld heat treatment, an inspector may be required to monitor certain items.
This ought to include: (Multiple preference)
Question 24 options:A) Heating and cooling fees.B) Minimum temperature distinction among
thermocouples.C) Calibrations of the torch assemblies used.D) Confirmation of mechanical
temperature consequences. - ANS-A) Heating and cooling charges.
During welding, what may additionally the inspector be referred to as upon to check?
(Multiple desire)
Question 19 alternatives:A) That the post weld warmth remedy has been completed.B) That
the welding parameters conform to the accepted methods.C) The of completion of the
inspection take a look at plan (ITP).D) That all weldments had been finished. - ANS-B) That
the welding parameters agree to the authorised tactics.
For ASME Section VIII stress vessel paintings, how would a welding inspector recognize that
electrodes meet the necessities? (Multiple desire)
Question 8 alternatives:A) They need to be certified to the CSA W48 collection.B) There isn't
any requirement for checking out electrodes.C) The inspector have to set up for checking out
of all electrodes.D) The appropriate ASME SFA specifications are said on the package label.
- ANS-D) The appropriate ASME SFA specifications are stated at the package label.
For ASME paintings, a WPS is needed. Which of the subsequent is NOT covered in a WPS?
(Multiple desire)
Question 17 alternatives:A) The base metallic.B) The welder's qualification.C) The welding
position.D) The submit-weld warmness remedy. - ANS-B) The welder's qualification.
For how long is an AWS welder qualification legitimate? (Multiple preference)
Question eight options:A) Two years.B) Five years.C) Indefinitely.D) Only for the duration of
challenge. - ANS-C) Indefinitely.
For the ASME, the WPS is the document that: (Multiple preference)
Question 16 options:A) offers direction for the execution of an acceptable weld.B) provides a
listing of perfect fabricators.C) states the requirements for structural production.D) states the
meeting commands for the numerous parts. - ANS-A) offers path for the execution of a
suitable weld.
How can an inspector confirm the temperature of the electrode preserving oven? (Multiple
desire)
Question 32 alternatives:A) By reading the heat putting at the oven.B) By reading the
temperature indicators on the electrodes.C) By the use of a temperature-indicating crayon.D)
Electrode oven temperatures do now not want to be established. - ANS-C) By using a
temperature-indicating crayon.
How might an inspector affirm a welder is qualified beneath CSA W47.1? (Multiple desire)
Question 28 options:A) The fabricator provides a listing of certified welders.B) Qualified
welders are issued an identity card.C) Welder qualification isn't always verifiable beneath the
terms of CSA W47.1.D) Welders are issued a "welder range" that may be used for
verification. - ANS-B) Qualified welders are issued an identity card.
In a non-conformance application, what coloration is used to indicate a product maintain?
(Multiple preference)
Question five alternatives:A) YellowB) RedC) GreenD) Blue - ANS-A) Yellow
In Canada, who regulates the construction of pressurized structures? (Multiple choice)
