2025 OSHA 30 Final Exam Prep With 300
Questions And Correct Answers/ OSHA 30
Final Test 2025 Prep Qs And As (100%
Correct Verified Answers)
Under OSHA construction requirements for crane and derricks, when a crane
operator is employed by a company, who must pay for the crane operator's
certification?
The crane operator's employer
OSHA requires that the competent person perform two visual and two manual tests
on a soil sample fresh out of the ground and not impacted by weather conditions at
the site.
False
The depth at which an excavation needs attention from a registered professional
engineer is:
20 feet
Shoring and shielding can be custom-built from tabulated data approved by a
registered professional engineer.
True
Prior to disposal of waste material you must determine the proper method of
disposal and personal protective equipment. Always consult the ______________
for all materials prior to disposal...
Safety Data Sheet or SDS
The forklift operator should know weight of materials to be moved, limitations of
equipment and load capacity chart. The operator should also ensure that:
Surfaces are level, free of hazards, and designed to withstand load.
Conveyor systems present many hazards when in operation. However, when shut
down for maintenance, what is especially important?
pg. 1
,Lockout and tagout the system
Inspect your forklift and read instructions:
Prior to use
A clean organized job site is a key component of a safe job site...Work areas shall
be inspected _______ for adequate housekeeping.
Daily
Unstable objects may be used to support scaffold legs:
Never
All systems have a seat of manufacturer's tabulated data to be used for proper
design and installation of the equipment.
True
Placing a shield between the side of an excavation and the work area can minimize
the risk in the event of a cave-in.
True
Walkways must have handrails when at ________ or more above lower level.
6 feet
Establishing eye contact with your equipment operator is a general safety principle
when working outside the working radius.
True
All surface encumbrances must be removed or supported within:
The zone of influence
A competent person must inspect all excavations, adjacent areas, and protective
systems daily, ____________, and as needed throughout the shift.
Before work begins
When using a ladder in a trench, it must be:
All of the above
Being dangerously close to a falling load is:
pg. 2
, Not allowed
Each of the following is true of accumulating water hazards EXCEPT:
Special supports or shields are not allowed
Each of the following is true of underground installations EXCEPT:
They must be removed
A surface encumbrance is anything that could create a ___________ in or around a
trench.
Hazard
Those who work on a crane or near crane operations must be trained. Which of the
following is true for this training?
D. All of the above
Certain inspections of crane equipment may be made by a(n) ___________ person;
however, crane inspections are typically required to be made by a(n) __________
person.
Competent, qualified
After safety-related modifications have been made to crane equipment, the
equipment must be inspected by __________ prior to use.
A qualified person
Inspection of hoists should include:
Both A & B (Hooks & Safety latches)
Hoists shall be:
All of the above
Daily inspections need to include:
Checking of the wire rope for damage or "caging"
Hoists shall be inspected:
Daily, prior to use
Do not perform maintenance on a conveyor until:
pg. 3
Questions And Correct Answers/ OSHA 30
Final Test 2025 Prep Qs And As (100%
Correct Verified Answers)
Under OSHA construction requirements for crane and derricks, when a crane
operator is employed by a company, who must pay for the crane operator's
certification?
The crane operator's employer
OSHA requires that the competent person perform two visual and two manual tests
on a soil sample fresh out of the ground and not impacted by weather conditions at
the site.
False
The depth at which an excavation needs attention from a registered professional
engineer is:
20 feet
Shoring and shielding can be custom-built from tabulated data approved by a
registered professional engineer.
True
Prior to disposal of waste material you must determine the proper method of
disposal and personal protective equipment. Always consult the ______________
for all materials prior to disposal...
Safety Data Sheet or SDS
The forklift operator should know weight of materials to be moved, limitations of
equipment and load capacity chart. The operator should also ensure that:
Surfaces are level, free of hazards, and designed to withstand load.
Conveyor systems present many hazards when in operation. However, when shut
down for maintenance, what is especially important?
pg. 1
,Lockout and tagout the system
Inspect your forklift and read instructions:
Prior to use
A clean organized job site is a key component of a safe job site...Work areas shall
be inspected _______ for adequate housekeeping.
Daily
Unstable objects may be used to support scaffold legs:
Never
All systems have a seat of manufacturer's tabulated data to be used for proper
design and installation of the equipment.
True
Placing a shield between the side of an excavation and the work area can minimize
the risk in the event of a cave-in.
True
Walkways must have handrails when at ________ or more above lower level.
6 feet
Establishing eye contact with your equipment operator is a general safety principle
when working outside the working radius.
True
All surface encumbrances must be removed or supported within:
The zone of influence
A competent person must inspect all excavations, adjacent areas, and protective
systems daily, ____________, and as needed throughout the shift.
Before work begins
When using a ladder in a trench, it must be:
All of the above
Being dangerously close to a falling load is:
pg. 2
, Not allowed
Each of the following is true of accumulating water hazards EXCEPT:
Special supports or shields are not allowed
Each of the following is true of underground installations EXCEPT:
They must be removed
A surface encumbrance is anything that could create a ___________ in or around a
trench.
Hazard
Those who work on a crane or near crane operations must be trained. Which of the
following is true for this training?
D. All of the above
Certain inspections of crane equipment may be made by a(n) ___________ person;
however, crane inspections are typically required to be made by a(n) __________
person.
Competent, qualified
After safety-related modifications have been made to crane equipment, the
equipment must be inspected by __________ prior to use.
A qualified person
Inspection of hoists should include:
Both A & B (Hooks & Safety latches)
Hoists shall be:
All of the above
Daily inspections need to include:
Checking of the wire rope for damage or "caging"
Hoists shall be inspected:
Daily, prior to use
Do not perform maintenance on a conveyor until:
pg. 3
