Powerplant: Engine Inspection (R and T)
ASA Exam Questions and Answers
8245-Which of the following can inspect and approve an engine
major repair for return service? -
correct answer ✅Certificated mechanic with inspection
authorization.
8243-Indentations of bearing races caused by high static loads are
known as -
correct answer ✅brinelling.
8248-Which of the following contains approved data for performing
a major repair to an aircraft engine? -
correct answer ✅Manufacturer's maintenance instructions when
FAA approved.
8251-Select the Airworthiness Directive applicability statement
which applies to an IVO-355 engine, serial number T8164, with
2,100 hours' total time and 300 hours since rebuilding. -
correct answer ✅Applies to all IVO-355 engines, serial numbers
T8000 through T8300, having less than 2400 hours' total time.
8235-Which of the following contains a table that lists the engines
to which a given propeller is acceptable? -
correct answer ✅Propeller Type Certificate Data Sheets.
, Powerplant: Engine Inspection (R and T)
ASA Exam Questions and Answers
8250-A ground incident that results in propeller sudden stoppage
would require a crankshaft runout inspection. What publications
would be used to obtain crankshaft runout tolerance? -
correct answer ✅Current manufacturer's maintenance
instructions.
8256-(1) Serviceability limits for turbine baldes are much more
stringent than are those for turbine nozzle vanes. (2) A limited
number of small nicks and dents can usually be permitted in any
area of a turbine blade. Regarding the above statements, -
correct answer ✅only No. 1 is true.
8234-When must an Airworthiness Directive (AD) be complied with
after it becomes effective? -
correct answer ✅As specified in the AD.
8249-What maintenance record(s) is/are required following a major
repair of an aircraft engine? -
correct answer ✅Entries in the maintenance record and FAA Form
337.
ASA Exam Questions and Answers
8245-Which of the following can inspect and approve an engine
major repair for return service? -
correct answer ✅Certificated mechanic with inspection
authorization.
8243-Indentations of bearing races caused by high static loads are
known as -
correct answer ✅brinelling.
8248-Which of the following contains approved data for performing
a major repair to an aircraft engine? -
correct answer ✅Manufacturer's maintenance instructions when
FAA approved.
8251-Select the Airworthiness Directive applicability statement
which applies to an IVO-355 engine, serial number T8164, with
2,100 hours' total time and 300 hours since rebuilding. -
correct answer ✅Applies to all IVO-355 engines, serial numbers
T8000 through T8300, having less than 2400 hours' total time.
8235-Which of the following contains a table that lists the engines
to which a given propeller is acceptable? -
correct answer ✅Propeller Type Certificate Data Sheets.
, Powerplant: Engine Inspection (R and T)
ASA Exam Questions and Answers
8250-A ground incident that results in propeller sudden stoppage
would require a crankshaft runout inspection. What publications
would be used to obtain crankshaft runout tolerance? -
correct answer ✅Current manufacturer's maintenance
instructions.
8256-(1) Serviceability limits for turbine baldes are much more
stringent than are those for turbine nozzle vanes. (2) A limited
number of small nicks and dents can usually be permitted in any
area of a turbine blade. Regarding the above statements, -
correct answer ✅only No. 1 is true.
8234-When must an Airworthiness Directive (AD) be complied with
after it becomes effective? -
correct answer ✅As specified in the AD.
8249-What maintenance record(s) is/are required following a major
repair of an aircraft engine? -
correct answer ✅Entries in the maintenance record and FAA Form
337.
