E1 RESIDENTIAL ELECTRICAL
INSPECTOR EXAM WITH
ACTUAL NGN QUESTIONS AND
VERIFIED WELL EXPLAINED
100% CORRECT
ANSWERS WITH RATIONALES
GRADED A+ LATEST UPDATE
2025 WITH
100% GUARANTEED SUCCESS
AFTER DOWNLOAD (ALL
YOU NEED TO PASS YOUR
EXAMS
,True or False. Cabinets or Panelboards being installed in wet or damp locations are required
to be weatherproof.
True
Section E3907.2
Cabinets and Panelboards installed in a wall of noncombustible material such as concrete or
tile shall be installed to where the front edge of the cabinet is not set back more than ___ inch
from the finished surface material.
1/4
Section E3907.3
Openings in which conductors enter ______ shall be closed in an approved manner.
cabinets, panelboards, meter sockets
Section E3907.7
Where cables are protected from physical damage by PVC rigid nonmetallic conduit, it shall
be a minimum Schedule ___.
80
Section E3802.3.2
Cables not sleeved yet exposed to direct sunlight shall be listed and marked as "______".
Sunlight Resistant
Section E3802.3.3
When determining the required number of receptacle outlets within a room, floor receptacle
outlets cannot be counted unless they are located within ____ inches from the wall.
18
Section E3901.2.3
, Bathrooms shall have at least one wall receptacle outlet installed within ___ inches of the
outside edge of a lavatory basin.
36
Section E3901.6
Receptacle outlets shall be equipped with ground-fault circuit interrupter protection when
located within ___ feet from the outside edge of a sink.
6
Section E3902.7
Receptacle outlets shall be equipped with ground-fault circuit interrupter protection when
located within ___ feet from the outside edge of a bathtub or shower stall.
6
Section E3902.8
Boxes used to support ceiling luminaires shall be capable of supporting a luminaire weight no
more than ___ pounds.
50
Section E3905.6.2
Boxes used to support ceiling-suspended fans shall be capable of supporting a ceiling fan that
weighs no more than ___ pounds.
70
Section E3905.8
When thread-forming machine screws are used to connect grounding conductors to metal
boxes, they shall be engaged not less than ___ thread(s) in the enclosure.
Two
Section E3908.15 #3
INSPECTOR EXAM WITH
ACTUAL NGN QUESTIONS AND
VERIFIED WELL EXPLAINED
100% CORRECT
ANSWERS WITH RATIONALES
GRADED A+ LATEST UPDATE
2025 WITH
100% GUARANTEED SUCCESS
AFTER DOWNLOAD (ALL
YOU NEED TO PASS YOUR
EXAMS
,True or False. Cabinets or Panelboards being installed in wet or damp locations are required
to be weatherproof.
True
Section E3907.2
Cabinets and Panelboards installed in a wall of noncombustible material such as concrete or
tile shall be installed to where the front edge of the cabinet is not set back more than ___ inch
from the finished surface material.
1/4
Section E3907.3
Openings in which conductors enter ______ shall be closed in an approved manner.
cabinets, panelboards, meter sockets
Section E3907.7
Where cables are protected from physical damage by PVC rigid nonmetallic conduit, it shall
be a minimum Schedule ___.
80
Section E3802.3.2
Cables not sleeved yet exposed to direct sunlight shall be listed and marked as "______".
Sunlight Resistant
Section E3802.3.3
When determining the required number of receptacle outlets within a room, floor receptacle
outlets cannot be counted unless they are located within ____ inches from the wall.
18
Section E3901.2.3
, Bathrooms shall have at least one wall receptacle outlet installed within ___ inches of the
outside edge of a lavatory basin.
36
Section E3901.6
Receptacle outlets shall be equipped with ground-fault circuit interrupter protection when
located within ___ feet from the outside edge of a sink.
6
Section E3902.7
Receptacle outlets shall be equipped with ground-fault circuit interrupter protection when
located within ___ feet from the outside edge of a bathtub or shower stall.
6
Section E3902.8
Boxes used to support ceiling luminaires shall be capable of supporting a luminaire weight no
more than ___ pounds.
50
Section E3905.6.2
Boxes used to support ceiling-suspended fans shall be capable of supporting a ceiling fan that
weighs no more than ___ pounds.
70
Section E3905.8
When thread-forming machine screws are used to connect grounding conductors to metal
boxes, they shall be engaged not less than ___ thread(s) in the enclosure.
Two
Section E3908.15 #3
