SACA CERTIFICATION C-101
EXAMS WITH ACTUAL CORRECT
QUESTIONS AND VERIFIED
DETAILED ANSWERS ALREADY
GRADED A+ GUARANTEED PASS
Standardize
Which 5S step involves formatting 5S work instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to be more
successful
How does the 5S method aid in the goal of lean manufacturing?
HMI
What is the interface used with CNC machines to load and monitor programs?
PLC
The automation of many different manufacturing processes is done through the use of a small computer
called a __________.
An error message.
When a machine stops due to an problem, what would the machine's HMI typically display?
Industry 4.0
Smart sensors connected to manufacturing networks creates what level of Industry?
Ethernet
What standard introduced in the early 1980s established a method to physically connect machines from
different manufacturers enabling them to communicate to one another?
Predictive maintenance
, Which IIoT application monitors equipment during normal operation to prevent failures to the
equipment?
Standards
Occupational Safety and Health Administration(OSHA) develops __________ for safety retail and service
industries to construction and manufacturing.
True
The regulation that requires manufacturers to document and report information on the types of
chemicals they use, store, release into the environment, or dispose of is known as EPCRA. Is this
statement TRUE or FALSE?
Computers
The use of ___________________marked the advent of the third industrial revolution?
Notify a supervisor immediately
If an operator knows a safety problem exists with a machine, the operator should __________.
Emergency stop
A(n) __________ is a device or system that shuts down a machine immediately if the operator is in
danger.
It is closed
If the energy sources are shut down, what would this mean for a pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment
What are the 5 steps of electrical Lockout/tagout
Falls
Which of the following is a common cause of workplace death?
Hazard assessment
The process of identifying potential hazards in the workplace is known as a __________.
TRUE
An injury is defined as physical harm to the body that happens as a result of exposure to some form of
energy that exceeds the body's tolerance. Is this statement TRUE or FALSE?
Shut down their machines and leave the building
EXAMS WITH ACTUAL CORRECT
QUESTIONS AND VERIFIED
DETAILED ANSWERS ALREADY
GRADED A+ GUARANTEED PASS
Standardize
Which 5S step involves formatting 5S work instructions so that they look and read alike?
Reduces the waste of excess motion, helps improve morale, and enables other lean methods to be more
successful
How does the 5S method aid in the goal of lean manufacturing?
HMI
What is the interface used with CNC machines to load and monitor programs?
PLC
The automation of many different manufacturing processes is done through the use of a small computer
called a __________.
An error message.
When a machine stops due to an problem, what would the machine's HMI typically display?
Industry 4.0
Smart sensors connected to manufacturing networks creates what level of Industry?
Ethernet
What standard introduced in the early 1980s established a method to physically connect machines from
different manufacturers enabling them to communicate to one another?
Predictive maintenance
, Which IIoT application monitors equipment during normal operation to prevent failures to the
equipment?
Standards
Occupational Safety and Health Administration(OSHA) develops __________ for safety retail and service
industries to construction and manufacturing.
True
The regulation that requires manufacturers to document and report information on the types of
chemicals they use, store, release into the environment, or dispose of is known as EPCRA. Is this
statement TRUE or FALSE?
Computers
The use of ___________________marked the advent of the third industrial revolution?
Notify a supervisor immediately
If an operator knows a safety problem exists with a machine, the operator should __________.
Emergency stop
A(n) __________ is a device or system that shuts down a machine immediately if the operator is in
danger.
It is closed
If the energy sources are shut down, what would this mean for a pneumatic valve?
1. Shut down the equipment
2.Connect Hasp
3. Attach Lock
4. Add Tag
5. Test Start Equipment
What are the 5 steps of electrical Lockout/tagout
Falls
Which of the following is a common cause of workplace death?
Hazard assessment
The process of identifying potential hazards in the workplace is known as a __________.
TRUE
An injury is defined as physical harm to the body that happens as a result of exposure to some form of
energy that exceeds the body's tolerance. Is this statement TRUE or FALSE?
Shut down their machines and leave the building
