Fortinet NSE 4 Exam 2025 With 100%
Accurate Solutions
Which UTM feature sends a UDP query to FortiGuard servers each time FortiGate scans a packet (unless
the response is locally cached)? - ✅✅✅CORRECT -Web Filtering
You have configured the DHCP server on a FortiGate's port1 interface (or internal, depending on the
model) to offer IPs in a range of 192.168.1.65-192.168.1.253. When the first host sends a DHCP request,
what IP will the DHCP offer? - ✅✅✅CORRECT -192.168.1.65
When an administrator attempts to manage FortiGate from an IP address that is not a trusted host, what
happens? - ✅✅✅CORRECT -FortiGate will drop the packets and not respond.
Is Database Auditing a FortiGate feature? - ✅✅✅CORRECT -No.
When a new administrator account is assigned the "prof_admin" profile, can it reset forgetten passwords
of other administrator accounts such as "admin"? - ✅✅✅CORRECT -No.
If you have lost your password for the "admin" account on your FortiGate, how should you reset it? (3
Steps) - ✅✅✅CORRECT -1. Power off the FortiGate.
2. After several seconds, restart it.
3. Via the local console, within 30 seconds after booting has completed, log in as "maintainer" and enter
the CLI commands to set the password for the "admin" account.
A backup file begins with this line: #config-version=FGVM64-5.02-FW-build589-
140613:opmode=0:vdom=0:user=admin #conf_file_ver=3881503152630288414 #buildno=0589
#global_vdom=1 Can you restore it to a FortiGate 60D? - ✅✅✅CORRECT -No, this is for a FortiGate
VM 64.
If you upload a new firmware image via the boot loader's menu from a TFTP server, will your
configuration be preserved? - ✅✅✅CORRECT -No.
, If you upload new firmware via the GUI or CLI, and are following a supported upgrade path, will your
configuration be preserved? - ✅✅✅CORRECT -FortiOS will attempt to convert the existing
configuration to be valid with any new or changed syntax. So yes, mostly.
FortiGuard gives package updates for which features? - ✅✅✅CORRECT -Antivirus and IPS
FortiGuard gives live queries for which features? - ✅✅✅CORRECT -Web and Email Gateway
What is the most common mode for a FortiGate? - ✅✅✅CORRECT -NAT
What mode other than NAT can a FortiGate be in? - ✅✅✅CORRECT -Transparent
Will a soft reboot enable you to reset admin password if you were to forget it? - ✅✅✅CORRECT -No,
only a hard reboot will work.
If you disable maintainer mode and then lose your admin password, are you ****ed? -
✅✅✅CORRECT -Yupp, totally ****ed.
Can you view reports in the CLI? - ✅✅✅CORRECT -No.
Can you use diagnostic commands in the GUI? - ✅✅✅CORRECT -No.
What is FortiExplorer used for? - ✅✅✅CORRECT -Used via mobile device to help deploy your
FortiGate. Configures network addresses and can be integrated into your network to configure other
Fortinet appliances.
Do you have to create admin accounts in the management console? - ✅✅✅CORRECT -No, you can
also do it on a remote authentication server.
Accurate Solutions
Which UTM feature sends a UDP query to FortiGuard servers each time FortiGate scans a packet (unless
the response is locally cached)? - ✅✅✅CORRECT -Web Filtering
You have configured the DHCP server on a FortiGate's port1 interface (or internal, depending on the
model) to offer IPs in a range of 192.168.1.65-192.168.1.253. When the first host sends a DHCP request,
what IP will the DHCP offer? - ✅✅✅CORRECT -192.168.1.65
When an administrator attempts to manage FortiGate from an IP address that is not a trusted host, what
happens? - ✅✅✅CORRECT -FortiGate will drop the packets and not respond.
Is Database Auditing a FortiGate feature? - ✅✅✅CORRECT -No.
When a new administrator account is assigned the "prof_admin" profile, can it reset forgetten passwords
of other administrator accounts such as "admin"? - ✅✅✅CORRECT -No.
If you have lost your password for the "admin" account on your FortiGate, how should you reset it? (3
Steps) - ✅✅✅CORRECT -1. Power off the FortiGate.
2. After several seconds, restart it.
3. Via the local console, within 30 seconds after booting has completed, log in as "maintainer" and enter
the CLI commands to set the password for the "admin" account.
A backup file begins with this line: #config-version=FGVM64-5.02-FW-build589-
140613:opmode=0:vdom=0:user=admin #conf_file_ver=3881503152630288414 #buildno=0589
#global_vdom=1 Can you restore it to a FortiGate 60D? - ✅✅✅CORRECT -No, this is for a FortiGate
VM 64.
If you upload a new firmware image via the boot loader's menu from a TFTP server, will your
configuration be preserved? - ✅✅✅CORRECT -No.
, If you upload new firmware via the GUI or CLI, and are following a supported upgrade path, will your
configuration be preserved? - ✅✅✅CORRECT -FortiOS will attempt to convert the existing
configuration to be valid with any new or changed syntax. So yes, mostly.
FortiGuard gives package updates for which features? - ✅✅✅CORRECT -Antivirus and IPS
FortiGuard gives live queries for which features? - ✅✅✅CORRECT -Web and Email Gateway
What is the most common mode for a FortiGate? - ✅✅✅CORRECT -NAT
What mode other than NAT can a FortiGate be in? - ✅✅✅CORRECT -Transparent
Will a soft reboot enable you to reset admin password if you were to forget it? - ✅✅✅CORRECT -No,
only a hard reboot will work.
If you disable maintainer mode and then lose your admin password, are you ****ed? -
✅✅✅CORRECT -Yupp, totally ****ed.
Can you view reports in the CLI? - ✅✅✅CORRECT -No.
Can you use diagnostic commands in the GUI? - ✅✅✅CORRECT -No.
What is FortiExplorer used for? - ✅✅✅CORRECT -Used via mobile device to help deploy your
FortiGate. Configures network addresses and can be integrated into your network to configure other
Fortinet appliances.
Do you have to create admin accounts in the management console? - ✅✅✅CORRECT -No, you can
also do it on a remote authentication server.
