Canadian Aviation Regulations Exam Questions and Correct Answers Latest Update (Rated A+)

Canadian Aviation Regulations Exam Questions and Correct Answers Latest Update (Rated A+) ACAS - Answers Airborne Collision Avoidance System An aircraft system based on transponder signals that operates independently of ground-based equipment and is intended to provide aural and visual alerts to a flight crew on the risk of collision with an approaching aircraft equipped with a transponder Act - Answers Aeronautics Act Aeroplane - Answers A power-driven heavier-than-air aircraft that derives its lift in flight from aerodynamic reactions on surfaces that remain fixed during flight. AGL - Answers Above Ground Level Air operator Certificate - Answers A certificate issued under Part VII that authorizes the holder of the certificate to operate a commercial air service Air Traffic Control Clarence - Answers An authorization issued by an air traffic control unit that authorizes an aircraft to proceed within controlled airspace in accordance with the conditions specified by that unit Air Traffic Control Instruction - Answers A directive issued by an air traffic control unit for air traffic control purposes Aircraft Flight Manual - Answers A manual, requirements for which may be established by the Minister in Part V, that contains information in respect of an aircraft Airport - Answers An aerodrome in respect of which an airport certificate issued under Subpart 2 of Part III is in force Airworthiness Directive - Answers An instruction issued by the Minister or by a civil aviation authority responsible for an aeronautical product type design that mandates a maintenance or operation action to ensure that an aeronautical product conforms to its type design and is in a condition for safe operation Airworthiness Limitation - Answers A limitation applicable to an aeronautical product, in the form of a life limit or a maintenance task that is mandatory as a condition of the type certificate Airworthy - Answers In respect of an aeronautical product, means in a fit and safe state for flight and in conformity with its type design ATS - Answers Air Traffic Services includes air traffic control services, advisory services and flight information services Canadian Technical Standard Order (CAN-TSO) Design Approval - Answers A document issued by the Minister to record the approval of the type design of an appliance or a part identified in the document by a model number, by a part number or by some other identification unique to the appliance or part, and includes a type approval for an aircraft appliance issued before October 10, 1996 under section 214 of the Air Regulations and a type certificate for an aircraft appliance issued before December 1, 2009 under section 511.11 or 511.21 CAT II Minima - Answers In respect of an aerodrome, means the minima specified in the Canada Air Pilot for a CAT II precision approach to a runway at that aerodrome CAT III Minima - Answers In respect of an aerodrome, means the minima specified in the Canada Air Pilot for a CAT III precision approach to a runway at that aerodrome. Category - Answers (a) when used in reference to flight crew licensing, the classification of aircraft as an aeroplane, a balloon, a glider, a gyroplane, a helicopter or an ultra-light aeroplane, and (b) when used in reference to the certification of aircraft, a grouping of aircraft based upon intended use or operating limitations such as normal, utility, aerobatic, commuter and transport Class - Answers In relation to the classification of aeroplanes, means aeroplanes having similar operating characteristics to single-engined aeroplanes, multi-engined aeroplanes, centre-line thrust aeroplanes, land aeroplanes or sea aeroplanes Co-authority Dispatch - Answers The shared responsibility of the pilot-in-command and the flight dispatcher for all decisions respecting the operational flight plan prior to its acceptance by the pilot-in-command, and for the flight watch Commercial Part - Answers In respect of an aircraft, means a part (a) that is not specifically designed or produced for use as an aeronautical product, (b) that is made to a specification or catalogue description and marked under an identification scheme of the maker, and ( c) whose failure does not adversely affect the continued safe flight and take-off and landing of the aircraft Contracting State - Answers A state that is a party to the Convention Convention - Answers The Convention on International Civil Aviation signed on behalf of Canada at Chicago on December 7, 1944, as amended from time to time Crew Member - Answers A person assigned to duty in an aircraft during flight time Dangerous Goods - Answers Means dangerous goods as defined in section 2 of the Transportation of Dangerous Goods Act, 1992 Day or Daylight - Answers The time between the beginning of morning civil twilight and the end of evening civil twilight; Decision Height - Answers The height specified in the Canada Air Pilot or the Restricted Canada Air Pilot at which a missed approach procedure is to be initiated during a precision approach if the required visual reference necessary to continue the approach to land has not been