10/18/24, 2:14 PM NEIEP 800 final review/NEIEP 800 final review questions and answers with complete solution /2024-2025 update/ most teste…
NEIEP 800 final review/NEIEP 800 final review
questions and answers with complete solution
/2024-2025 update/ most tested questions
update!!
Terms in this set (55)
The total weight of your 162 psi
elevator (force) is 8100
lbs. and its plunger area
is 50 square inches. What
is the system pressure?
Refer to the NEIEP 134' 11"
Moving Walk Final Layout.
What is the correct
wellway-to-wellway
distance?
Electrolysis is caused by Stray current corrosion and Galvanic corrosion
which of the following? BOTH ARE CORRECT
When using wire rope, 30
the diameter of the
sheaves must be how
many times the diameter
of the suspension ropes?
Wye-Delta starting is Reduced current starting
used for which of the
following?
https://quizlet.com/959096796/neiep-800-final-reviewneiep-800-final-review-questions-and-answers-with-complete-solution-2024-2025-update-mo… 1/8
, 10/18/24, 2:14 PM NEIEP 800 final review/NEIEP 800 final review questions and answers with complete solution /2024-2025 update/ most teste…
You need the area of the 50.27 square inches
plunger to calculate the
pressure of the hydraulic
system. Your plunger is 8
inches in diameter. What
is it's area?
Which of the following Interlock contacts
provides mechanical
interlocking of
contactors?
As the certified welder Tack welds then a fill bead
on the job you must weld
two cylinder pieces. How
must you join the two
pieces?
Once a plunger joint has Sand with emery cloth
been completed, what
steps should be followed
to prevent damage to the
packing?
Under which of the When the handrail speed is 15% below step speed.
following conditions will
the buzzer (BZT) sound?
Refer to the NEIEP 13' 6"
Escalator Final Layout
diagram. What is the total
distance from the first
floor finished floor height
and the second floor
finished floor height?
Refer to the NEIEP 7' 6 1/2"
Escalator Final Layout
diagram. What is the
correct measurement to
align the truss in the
center of the wellway?
https://quizlet.com/959096796/neiep-800-final-reviewneiep-800-final-review-questions-and-answers-with-complete-solution-2024-2025-update-mo… 2/8
NEIEP 800 final review/NEIEP 800 final review
questions and answers with complete solution
/2024-2025 update/ most tested questions
update!!
Terms in this set (55)
The total weight of your 162 psi
elevator (force) is 8100
lbs. and its plunger area
is 50 square inches. What
is the system pressure?
Refer to the NEIEP 134' 11"
Moving Walk Final Layout.
What is the correct
wellway-to-wellway
distance?
Electrolysis is caused by Stray current corrosion and Galvanic corrosion
which of the following? BOTH ARE CORRECT
When using wire rope, 30
the diameter of the
sheaves must be how
many times the diameter
of the suspension ropes?
Wye-Delta starting is Reduced current starting
used for which of the
following?
https://quizlet.com/959096796/neiep-800-final-reviewneiep-800-final-review-questions-and-answers-with-complete-solution-2024-2025-update-mo… 1/8
, 10/18/24, 2:14 PM NEIEP 800 final review/NEIEP 800 final review questions and answers with complete solution /2024-2025 update/ most teste…
You need the area of the 50.27 square inches
plunger to calculate the
pressure of the hydraulic
system. Your plunger is 8
inches in diameter. What
is it's area?
Which of the following Interlock contacts
provides mechanical
interlocking of
contactors?
As the certified welder Tack welds then a fill bead
on the job you must weld
two cylinder pieces. How
must you join the two
pieces?
Once a plunger joint has Sand with emery cloth
been completed, what
steps should be followed
to prevent damage to the
packing?
Under which of the When the handrail speed is 15% below step speed.
following conditions will
the buzzer (BZT) sound?
Refer to the NEIEP 13' 6"
Escalator Final Layout
diagram. What is the total
distance from the first
floor finished floor height
and the second floor
finished floor height?
Refer to the NEIEP 7' 6 1/2"
Escalator Final Layout
diagram. What is the
correct measurement to
align the truss in the
center of the wellway?
https://quizlet.com/959096796/neiep-800-final-reviewneiep-800-final-review-questions-and-answers-with-complete-solution-2024-2025-update-mo… 2/8
