OSHA-10 Module 3 Fall Protection Questions with
correct answers
Covers located on roadways and vehicular aisles shall be capable of
supporting , without failure, at least Correct Answer-Twice the
maximum axle load of the largest vehicle expected to cross over the
cover.
Accidents involving falls are: Correct Answer-Generally complex events
that frequently involve a number of factors
what is a fall Hazard Correct Answer-A fall hazard is anything at your
worksite that could cause you to lose your balance or lose bodily support
and result in a fall
What the minimum height in general industry that OSHA requires fall
protection Correct Answer-Four feet or more
What the general height in martime that OSHA requires fall protection
Correct Answer-Five feet
Whats the general height in construction that OSHA requires fall
protection Correct Answer-Six feet
Regardless of the fall distance fall protection must be provided when
working over what. Correct Answer-Dangerous equipment and
machinery
, If you are working on a scaffold fall protection is required when
working and what height Correct Answer-Ten feet
Holes including skylights must cover that are capable of covering what
amount of weight Correct Answer-At least twice the weight of
employees of, equipment and material that may be imposed on the cover
at anytime.
On a worksite who should inspect all scaffolding and when should they
be inspected Correct Answer-A competent person should inspect the
scaffolds before every shift
Supporting Stanchions that must be flagged at not more than______ and
intervals with Correct Answer-6 feet and high visibility material
who should design the scaffolds and prepare its rigging Correct Answer-
Someone who has very specific knowledge and training
When holes are used for the passage of materials, the hole shall have not
have more than how many removable guard rail sections Correct
Answer-two
Every supported scaffold and its components must support what with out
failure Correct Answer-Its own weight and at lest four times the
intended load
correct answers
Covers located on roadways and vehicular aisles shall be capable of
supporting , without failure, at least Correct Answer-Twice the
maximum axle load of the largest vehicle expected to cross over the
cover.
Accidents involving falls are: Correct Answer-Generally complex events
that frequently involve a number of factors
what is a fall Hazard Correct Answer-A fall hazard is anything at your
worksite that could cause you to lose your balance or lose bodily support
and result in a fall
What the minimum height in general industry that OSHA requires fall
protection Correct Answer-Four feet or more
What the general height in martime that OSHA requires fall protection
Correct Answer-Five feet
Whats the general height in construction that OSHA requires fall
protection Correct Answer-Six feet
Regardless of the fall distance fall protection must be provided when
working over what. Correct Answer-Dangerous equipment and
machinery
, If you are working on a scaffold fall protection is required when
working and what height Correct Answer-Ten feet
Holes including skylights must cover that are capable of covering what
amount of weight Correct Answer-At least twice the weight of
employees of, equipment and material that may be imposed on the cover
at anytime.
On a worksite who should inspect all scaffolding and when should they
be inspected Correct Answer-A competent person should inspect the
scaffolds before every shift
Supporting Stanchions that must be flagged at not more than______ and
intervals with Correct Answer-6 feet and high visibility material
who should design the scaffolds and prepare its rigging Correct Answer-
Someone who has very specific knowledge and training
When holes are used for the passage of materials, the hole shall have not
have more than how many removable guard rail sections Correct
Answer-two
Every supported scaffold and its components must support what with out
failure Correct Answer-Its own weight and at lest four times the
intended load
