NISP FIRE SAFETY EXAM (ACTUAL EXAM )
WITH CORRECT 50+ QUESTIONS AND
ANSWERS LATEST 2024 – 2025 GOOD
SCORE IS GUARANTEED GRADE A+
6 yrs - ANSWERS-Extinguishers should be tested by a tech
every:
Beam of light - ANSWERS-Photoelectric smoke detector uses:
Grease, gas, and oil - ANSWERS-Class B fires use the following
as fuel
165 degrees - ANSWERS-Most sprinklers activate at...:
,Cigarettes not fully out inside a trash can - ANSWERS-When on
patrol, watch for careless discards such as:
Oxygen, heat, and fuel - ANSWERS-To ignite and sustain a fire, a
chemical reaction or spark is combined with:
each chemical transported, produced or used on site. -
ANSWERS-An SDS (Safety Data Sheet) is required for:
heat - ANSWERS-The condition of warming measured by rising
degree is:
All over the building - ANSWERS-Sprinklers are effective
because they release an extinguishing agent:
4-step process to use a fire extinguisher - ANSWERS-Define
PASS
ensure control valve is closed - ANSWERS-When checking a
sprinkler system, do the following except:
, 36" of cleared space at all times - ANSWERS-Aisles and
corridors should have:
Activate when air temp hit a certain heat level - ANSWERS-Heat
detectors:
Check the tag on the frame or door - ANSWERS-You can tell the
rating on a fire door by:
fire should be in immediate are it began in - ANSWERS-If you
decide to fight a fire:
Kitchens - ANSWERS-Heat detectors are best used in:
have water held back and pressurized - ANSWERS-Dry sprinkler
systems:
Class B & C - ANSWERS-A carbon dioxide fire extinguisher may
be used on which class of fire:
WITH CORRECT 50+ QUESTIONS AND
ANSWERS LATEST 2024 – 2025 GOOD
SCORE IS GUARANTEED GRADE A+
6 yrs - ANSWERS-Extinguishers should be tested by a tech
every:
Beam of light - ANSWERS-Photoelectric smoke detector uses:
Grease, gas, and oil - ANSWERS-Class B fires use the following
as fuel
165 degrees - ANSWERS-Most sprinklers activate at...:
,Cigarettes not fully out inside a trash can - ANSWERS-When on
patrol, watch for careless discards such as:
Oxygen, heat, and fuel - ANSWERS-To ignite and sustain a fire, a
chemical reaction or spark is combined with:
each chemical transported, produced or used on site. -
ANSWERS-An SDS (Safety Data Sheet) is required for:
heat - ANSWERS-The condition of warming measured by rising
degree is:
All over the building - ANSWERS-Sprinklers are effective
because they release an extinguishing agent:
4-step process to use a fire extinguisher - ANSWERS-Define
PASS
ensure control valve is closed - ANSWERS-When checking a
sprinkler system, do the following except:
, 36" of cleared space at all times - ANSWERS-Aisles and
corridors should have:
Activate when air temp hit a certain heat level - ANSWERS-Heat
detectors:
Check the tag on the frame or door - ANSWERS-You can tell the
rating on a fire door by:
fire should be in immediate are it began in - ANSWERS-If you
decide to fight a fire:
Kitchens - ANSWERS-Heat detectors are best used in:
have water held back and pressurized - ANSWERS-Dry sprinkler
systems:
Class B & C - ANSWERS-A carbon dioxide fire extinguisher may
be used on which class of fire:
