Voice, Data, and Video Exam (100 out of 100) Questions and
Verified Answers (GRADED A) Latest Update 2024
What is firestopping
A material or mechanical device used to block openings and walls, ceilings, or floors to prevent the
passage of fire or smoke
what does the acronym UTP stand for
unshielded twisted pair
what are the transmission rates of cat 3 cable
16 megahertz
what is the most common shield used on RG6 coax
tri shield and quad shield are the most common
structured cabling systems are divided into how many subsystems and what are they
5
-campus backbone subsystem
-equipment room subsystem
-riser subsystem
-horizontal cabling subsystem
-work area subsystem
Ask for any Exams or Study materials from ()
, describe a work area subsystem
telecommunications outlets at the end user location and the associated patch cables providing final
connectivity
on a campus backbone subsystem cable where should the label be placed
on conduit within 6 inches of the termination point
on innerduct within 12 inches of the termination point
what is the rule regarding motors and transformers then an equipment / Telecom room
Telecom cable must be kept 48 inch away from the motors and transformers
all incoming conduit and innerduct should include
firestopping
on a riser subsystem all conduit should be
raised and pushed on each end and have no more than two 90-degree bends between pull points or pull
boxes
any penetrations through walls or floors that we are required for the riser pathways must
be neatly sleeved and fire stopped immediately upon completing the penetration
Ask for any Exams or Study materials from ()
Verified Answers (GRADED A) Latest Update 2024
What is firestopping
A material or mechanical device used to block openings and walls, ceilings, or floors to prevent the
passage of fire or smoke
what does the acronym UTP stand for
unshielded twisted pair
what are the transmission rates of cat 3 cable
16 megahertz
what is the most common shield used on RG6 coax
tri shield and quad shield are the most common
structured cabling systems are divided into how many subsystems and what are they
5
-campus backbone subsystem
-equipment room subsystem
-riser subsystem
-horizontal cabling subsystem
-work area subsystem
Ask for any Exams or Study materials from ()
, describe a work area subsystem
telecommunications outlets at the end user location and the associated patch cables providing final
connectivity
on a campus backbone subsystem cable where should the label be placed
on conduit within 6 inches of the termination point
on innerduct within 12 inches of the termination point
what is the rule regarding motors and transformers then an equipment / Telecom room
Telecom cable must be kept 48 inch away from the motors and transformers
all incoming conduit and innerduct should include
firestopping
on a riser subsystem all conduit should be
raised and pushed on each end and have no more than two 90-degree bends between pull points or pull
boxes
any penetrations through walls or floors that we are required for the riser pathways must
be neatly sleeved and fire stopped immediately upon completing the penetration
Ask for any Exams or Study materials from ()
