8/29/24, 2:22 PM ACI WRITTEN TEST EXAM 2024 -2025 MOST TESTED COMPLETE QUESTIONS WITH DETAILED VERIFIED ANSWERS (…
ACI WRITTEN TEST EXAM 2024 -2025 MOST
TESTED COMPLETE QUESTIONS WITH
DETAILED VERIFIED ANSWERS (100% CORRECT
ANSWERS) / ALREADY GRADED A+
Terms in this set (133)
The sensor of the 3 (75mm)
temperature measureing
device shall be submerged
a minimum of ____ in
The temperature 1(.5 degrees C), 30-120 (0-50 degrees C)
measureing device shall
have a capacity of
measuring temperature of
freshly mixed conrcrete to
+-_____ degrees F throught a
range of _____
The temperature annually, accuracy
measuring device shall be
calibrated____, or whenever
there is a question of _____
The temp of concrete may true
be measured in a
wheelbarrow
the temp of concrete may true
be measured in a wall form
A composite sample of false
concrete is required even
if the only purpose for
obtaining the sample is to
determine temp.
ACI WRITTEN TEST EXAM 2024 -2025 MOST TESTED COM...
https://quizlet.com/936455488/aci-written-test-exam-2024-2025-most-tested-complete-questions-with-detailed-verified-answers-100-correct-ans… 1/12
, 8/29/24, 2:22 PM ACI WRITTEN TEST EXAM 2024 -2025 MOST TESTED COMPLETE QUESTIONS WITH DETAILED VERIFIED ANSWERS (…
What must be done to the dampen (with water)
sample container prior to
sampling the concrete
what must be done to the Press concrete around measuring device
concrete surrounding the
temp measuring device
after the device has
submerged
How long must the temp at least 2 minutes (but no more than 5)
device remain in the
concrete
After temp of concrete is reporting of temp
read, what then is required
the temp of concrete to be 1 (.5 degree C)
measured to the nearest
____degree F
According to the ASTM verify conformance to a specified requirement for
C1064 what is one reason temp
to take the temp of
concrete
A max temp of concrete is False
specified in ASTM C1064
The sample of concrete False
used for temp
determination must be
rodded 25 times
Sampling by this method is compliance
required when tests are to
be made to determine ____
with specification
requirements
The method covers stationary mixes, paving mixers, revolving drum mixers
sampling from four types and open top mixers
of mixers which are _____,
_____, ____, and _______
ACI WRITTEN TEST EXAM 2024 -2025 MOST TESTED COM...
https://quizlet.com/936455488/aci-written-test-exam-2024-2025-most-tested-complete-questions-with-detailed-verified-answers-100-correct-ans… 2/12
ACI WRITTEN TEST EXAM 2024 -2025 MOST
TESTED COMPLETE QUESTIONS WITH
DETAILED VERIFIED ANSWERS (100% CORRECT
ANSWERS) / ALREADY GRADED A+
Terms in this set (133)
The sensor of the 3 (75mm)
temperature measureing
device shall be submerged
a minimum of ____ in
The temperature 1(.5 degrees C), 30-120 (0-50 degrees C)
measureing device shall
have a capacity of
measuring temperature of
freshly mixed conrcrete to
+-_____ degrees F throught a
range of _____
The temperature annually, accuracy
measuring device shall be
calibrated____, or whenever
there is a question of _____
The temp of concrete may true
be measured in a
wheelbarrow
the temp of concrete may true
be measured in a wall form
A composite sample of false
concrete is required even
if the only purpose for
obtaining the sample is to
determine temp.
ACI WRITTEN TEST EXAM 2024 -2025 MOST TESTED COM...
https://quizlet.com/936455488/aci-written-test-exam-2024-2025-most-tested-complete-questions-with-detailed-verified-answers-100-correct-ans… 1/12
, 8/29/24, 2:22 PM ACI WRITTEN TEST EXAM 2024 -2025 MOST TESTED COMPLETE QUESTIONS WITH DETAILED VERIFIED ANSWERS (…
What must be done to the dampen (with water)
sample container prior to
sampling the concrete
what must be done to the Press concrete around measuring device
concrete surrounding the
temp measuring device
after the device has
submerged
How long must the temp at least 2 minutes (but no more than 5)
device remain in the
concrete
After temp of concrete is reporting of temp
read, what then is required
the temp of concrete to be 1 (.5 degree C)
measured to the nearest
____degree F
According to the ASTM verify conformance to a specified requirement for
C1064 what is one reason temp
to take the temp of
concrete
A max temp of concrete is False
specified in ASTM C1064
The sample of concrete False
used for temp
determination must be
rodded 25 times
Sampling by this method is compliance
required when tests are to
be made to determine ____
with specification
requirements
The method covers stationary mixes, paving mixers, revolving drum mixers
sampling from four types and open top mixers
of mixers which are _____,
_____, ____, and _______
ACI WRITTEN TEST EXAM 2024 -2025 MOST TESTED COM...
https://quizlet.com/936455488/aci-written-test-exam-2024-2025-most-tested-complete-questions-with-detailed-verified-answers-100-correct-ans… 2/12
