Correct!!
You tap and shout to check for responsiveness, but the patient does not respond. What is your next
step after calling for help?
o Wait for the code team to arrive
o Immediately being CPR
o Check for breathing and a pulse
o Turn on the AED - ANSWER-o Check for breathing and a pulse
After check for breathing and a pulse, you find that the patient is not breathing normally but has a
pulse and needs rescue breathing. What is the correct ventilation rate?
o 2 breaths every 3-5 seconds, or about 24-40 breaths per minute
o 2 breaths every 6 seconds, or about 20 breaths per minute
o 1 breath every 3-5 seconds, or about 12-20 breaths per minute
o 1 breath every 6 seconds, or about 10 breaths per minute - ANSWER-o 1 breath every 6 seconds, or
about 10 breaths per minute
After 4 minutes of rescue breathing, no pulse is present during a pulse check. What immediate
actions should be taken?
o Turn on the AED while your colleague attaches the pads to the patient's chest
o Continue providing rescue breaths and turn on the AED
o Immediately being CPR while your colleague counts compressions out loud
o Immediately being CPR and turn on the AED - ANSWER-o Immediately being CPR and turn on the
AED
As you arrive at the patient's side, you assign individual roles, outlining what each member needs to
do during the resuscitation attempt. Which team members are responsible for the following roles?
o Assess the patient and provides compressions - compressor
o Operates the AED - monitor/defibrillator
o Provides ventilation - airway - ANSWER-o Assess the patient and provides compressions -
compressor
o Operates the AED - monitor/defibrillator